浏览全部资源
扫码关注微信
纸质出版日期： 2024-07-25 ，
扫 描 看 全 文
徐明刚，王振，张从鹏，等.法兰端面防松片焊点疲劳寿命及分布优化研究［J］.电焊机，2024，54（7）：93-99.
XU Minggang, WANG Zhen, ZHANG Congpeng, et al.Optimization of Fatigue Life and Distribution of Flanged End-piece Anti-looseness Sheet Solder Joints[J].Electric Welding Machine, 2024, 54(7): 93-99.
关于法兰端面防松片焊点疲劳寿命与焊点布置问题，如果根据焊接标准对工件焊点布置方案进行设计，可能会导致工件材料的性能得不到完全发挥，若在一些危险区域的焊点过少，则会导致焊接失败，焊点过多则会导致材料性能的破坏，焊接成本增加。因此，根据防松片焊点疲劳寿命与个数之间的关系，对防松片焊点布置方案进行了优化设计，提高法兰端面防松片焊点疲劳寿命性能。首先，对法兰端面防松片焊点布置方案进行了设计；其次，基于ANSYS建立了防松片焊接有限元模型，通过对焊接过程中热流密度分布的分析，采用高斯热源模型作为防松片焊接模型热源；通过对防松片焊点模型分析求解出了法兰端面防松片不同焊点布置方案的最大应变；最后，建立了焊点疲劳寿命预测模型，根据应变进行疲劳寿命预测并进行求解，求解出不同分布方案下焊点的疲劳寿命，并对数据进行高斯曲线拟合建立优化函数关系，通过拟合优化结果表明当防松片内圈焊点24个、外圈焊点30个同时作用在防松片上时，其焊点疲劳寿命能够得到较好的保持。
With regard to the fatigue life and solder joint arrangement of flanged end-face flanges
if the solder joint arrangement scheme of the workpiece is designed according to the welding standard
the performance of the workpiece material may not be fully developed
if there are too few solder joints in some dangerous areas
it will lead to welding failure
too many solder joints will lead to the destruction of material properties
welding costs increase. Therefore
according to the relationship between the fatigue life and the number of flanged solder joints
the layout of flanged solder joints was optimized to improve the fatigue life of flanged solder joints. Firstly
the layout of flanged end-face anti-looseness solder joint is designed. Secondly
a finite element model of anti-looseness welding was established based on Ansys. Gauss heat source model was used as the heat source of anti-looseness welding model by analyzing the heat flux distribution during the welding process. Based on the analysis of the solder joint model of flanged flanges
the maximum strain of different solder joint arrangement of flanged ends is obtained. Finally
the fatigue life prediction model of solder joint is established
and the fatigue life of solder joint is predicted and solved according to the strain
the data were fitted with Gauss curve to establish an optimization function. The fitting optimization results show that when 24 inner ring solder joints and 30 outer ring solder joints simultaneously act on the anti loosening sheet
the fatigue life of the solder joints can be well maintained.
电阻点焊：焊点疲劳寿命焊点分布优化高斯曲线拟合
resistance spot weldingfatigue lifeoptimization of solder joint distributiongaussian curve fitting
Choi B，Park Y H，Choi K K. Shape design optimization of joining mechanism using doubly curved shell ［J］. Computers and Structures，2000，77：495-507.
Zhang Y，Taylor D. Optimization of spot-welded structures［J］. Finite Elem Anal Des，2001，37：1013-1022.
Wang L，Levia J P. Design optimization of automobile welds［J］.International Journal of Vehicle Design，2003，31（4）：377-391.
徐杰，雷刚，曹建国，等. 轿车车门焊点布置优化设计及仿真分析［J］. 重庆工学院学报（自然科学），2009（11）：25-38.
XU J，LEI G，CAO J G，et al. Spot Weld Layout Optimization and Simulation Analysis of Automobile Door［J］. Journal of Chongqing Institute of Technology，2009（11）：25-38.
刘子辉. 商用车驾驶室白车身焊点布置优化及鲁棒性分析［D］. 吉林：吉林大学，2012.
LIU Z H. The Layout Optimization and Robust Analysis of Welding spot for Cab Body in White of a Commercial Vehicle［D］. Jilin：Jilin University，2012.
Ertas A H，Fazıl O S. Design optimization of spot-welded plates for maximum fatigue life［J］. Finite Elements in Analysis and Design，2011，47：413-423.
Radaj D. Local Fatigue Strength characteristic Values for Spot Welded Joints. Engineering Fracture Mechanics［J］. 1993，37（1）：245-250.
Rupp A. Computer Aided Dimensioning of Spot-welded Automotive Structures［J］. SAE Technical Paper，1995，950711：128-135.
WANG L S，Prodyot K B，Leiva J P. Design optimization of automobile welds［J］. Int. J. Vehicle Des.， 2003，31：377-391.
Liao Y G. Optimal design of weld pattern in sheet metal assembly based on a genetic algorithm［J］. International Journal of Advanced Manufacturing Technology，2005，26：512-516.
Vesna Savic，Simon Xu. Fixed weld reduction method for opti-mal welding spot pattern design［J］. SAE Technical Paper，2003.
陈勇. 基于焊点疲劳寿命的某轿车B柱焊点布置研究［D］. 吉林：吉林大学，2013.
CHEN Y. Study on Welding Spot Layout for a Car B-pillar Based on the Welding Spot Fatigue Lifetime［D］.Jilin：Jilin University，2013.
Rui Y，Yang R J，Chen C J，et al. Fatigue optimization of spot welds［J］.Body Des Eng.IBEC，1996，96：68-72.
YUAN L R，LIN K B，XUE S，et al. Optimization Design Method of Array Solder Joint Layout Based on Stress Mean Square Deviation［C］//23rd International conference on electronic packaging technology（ICEPT），Dalian，China，2022.
相关文章
相关作者
相关机构
公网安备11010802024621