浏览全部资源
扫码关注微信
纸质出版日期： 2024-07-25 ，
扫 描 看 全 文
杨瑞琛，王进，高波，等.转速对铝铜异种金属薄板搅拌摩擦焊接头组织与性能的影响［J］.电焊机，2024，54（7）：83-92.
YANG Ruichen, WANG Jin, ZHANG Shuai, et al.Effect of Rotation Speed on Microstructure and Properties of Friction Stir Welded Joint of Aluminum/Copper Dissimilar Metal Sheet[J].Electric Welding Machine, 2024, 54(7): 83-92.
探讨了不同转速（1 600~2 000 r/min）对铝铜异种金属薄板搅拌摩擦焊接头组织与性能的影响，旨在为铜-铝较薄复合构件的开发提供理论依据。实验采用搅拌摩擦焊（FSW）技术对接焊铝和铜薄板，通过金相显微镜、扫描电子显微镜（SEM）、X射线能谱仪器（EDS）、X射线衍射仪（XRD）和显微维氏硬度计等设备对焊接接头的宏观形貌、微观结构、元素分布、金属间化合物（IMCs）相和硬度分布进行分析，并通过拉伸试验机研究其力学性能。结果表明，在1 600~1 800 r/min转速下，可获得表面质量良好的焊接接头，且随着转速的增加，IMCs层厚度增加，显微硬度峰值出现在焊核区，平均硬度高于铜侧和铝侧；接头断裂方式为韧-脆混合断裂，断裂位置均在铜铝对接接头处；当焊接速度为30 mm/min，转速1 800 r/min时，接头表面质量最佳，IMCs层厚为2.65 μm，抗拉强度达到最大值，显示出良好的力学性能，适合于铜-铝较薄复合构件的应用。。
The microstructure and mechanical properties of friction stir welded butt joints of aluminum-copper dissimilar metal sheets at different rotational speeds (1600~2000 r/min) were studied
which provided a reference for the development of copper-aluminum thinner composite components. Under the condition of 1600~2000 r/min
the friction stir welding ( FSW ) method was used to weld the copper-aluminum sheet. After the welding was completed
the macroscopic morphology of the welded joint was observed by metallographic microscope. The microstructure of the welded joint was observed by sca
nning electron microscope ( SEM ). The element change of the welded joint was studied by X-ray energy dispersive spectrometer ( EDS ). The phase of the intermetallic compounds ( IMCs ) was studied by X-ray diffractometer ( XRD ). The microhardness of the welded joint was studied by micro Vickers hardness tester. The tensile properties of welded joints were studied by tensile testing machine. It is found that the welded joints with good surface quality can be obtained at different rotational speeds (1600~1800 r/min). When the rotational speed is further increased
the surface quality is further improved. Complex microstructure was produced at the interface of aluminum matrix and copper matrix
and two intermetallic compounds
Al
2
Cu and Al
4
Cu
9
were produced. With the increase of rotational speed
the thickness of IMCs also increased. The peak value of microhardness appears in the weld nugget zone
and the average microhardness is higher than that of the copper side and the aluminum side. The fracture modes of the joints at different rotational speeds are all in the form of ductile-brittle mixed fracture
and the fracture positions are all broken at the copper-aluminum butt joints. When the welding speed is 30 mm/min and the rotation speed is 1 800 r/min
the surface quality of the joint is the best and the interface structure is the best. The thickness of the IMCs is 2.65 μm
and the tensile strength of the joint can reach the maximum
which is suitable for the development of thin copper-aluminum composite components.
搅拌摩擦焊铜铝异种接头转速金属间化合物力学性能
FSWAl/Cu dissimilar jointstirring needle speedIMCsmechanical property
田荣璋，王祝堂. 铜合金及其加工手册［M］. 长沙：中南大学出版社，2002：14-18.
王祝堂. 铝合金及其加工手册［M］. 长沙：中南工业大学出版社，2000：15-17.
宿浩，李雪，赵庆桢，等. 搅拌针偏移量对铝/铜异质金属搅拌摩擦焊接过程和接头组织性能的影响［J］. 电焊机，2023，53（3）：91-100.
SU H，LI X，ZHAO Q Z，et al. Effect of Pin Offset on Welding Process Joint Microstructure and Mechanical Property in Al/Cu Dissimilar Friction Stir Welding［J］. Electric Welding Machine，2023，53（3）：91-100.
PATEL V K，CHEN D L，BHOLE S D. Dissimilar Ultrasonic Spot Welding of Mg-Al and Mg-high Strength Low Alloy Steel［J］. Theoretical and Applied Mechanics Letters，2014，4（4）：041005.
FIROUZDOR V，KOU S. Al-to-Cu Friction Stir Lap Welding［J］. Metallurgical and Materials Transactions A，2012，43：303-315.
孙炜佳. 6061铝合金/T2紫铜异质搅拌摩擦焊接头组织性能研究［D］. 吉林：吉林大学，2022：6-10.
SUN W J. Study on Microstructure and Properties of 6061 Aluminum Alloy/T2 Copper Dissimilar Friction Stir Welding Joint［D］. Jilin：Jilin University，2022：6-10.
BISADI H，TAVAKOLI A，SANGSARAKI M T，et al. The Influences of Rotational and Welding Speeds on Microstructures and Mechanical Properties of Friction Stir Welded Al5083 and Commercially Pure Copper Sheets Lap Joints［J］. Materials & Design，2013，43：80-88.
SACHINDRA S，P. K M，SOMNATH C， et al. Dissimilar Friction Stir Welding of Al to Non-Al Metallic Materials：An Overview［J］. Materials Chemistry and Physics，2022，288：126371.
王勇强，王进，王梦婷，等. 5052/6061异种铝合金薄板搅拌摩擦焊接工艺研究［J］. 精密成形工程，2022，14（04）：122-128.
WANG Y Q，WANG J，WANG M T，et al. Study on Friction Stir Welding Process of 5052/6061 Dissimilar Aluminum Alloy Sheet［J］. Journal of Netshape Forming Engineering，2022，14（04）：122-128.
陈书锦，任剑剑，谢青霖，等. 基于模糊PID控制的高转速铝合金薄板搅拌摩擦焊接过程控制研究［J］. 江苏科技大学学报（自然科学版），2023，37（01）：35-40.
CHEN S J，REN J J，XIE Q L，et al. Research on Friction Stir Welding Process Control of High Speed Aluminum Alloy Sheet Based on Fuzzy PID Control［J］. Journal of Jiangsu University of Science and Technology（Natural Science Edition），2023，37（01）：35-40.
刘鑫. 铝/铜异种材料搅拌摩擦焊控形控性研究［D］. 黑龙江： 哈尔滨工业大学，2019：5-15.
LIU X. Study on Shape Control of Friction Stir Welding of Aluminum/Copper Dissimilar Materials［D］. Heilongjiang： Harbin Institute of Technology，2019：5-15.
GALVAO I，OLIVEIRA J C，LOUREIRO A，et al. Formation and Distribution of Brittle Structures in Friction Stir Welding of Aluminium and Copper： Influence of Process Parameters［J］. Science and Technology of Welding and Joining，2011，16（8）：681-689.
KADIGITHALA N K. Effects of Welding Speeds on the Microstructural and Mechanical Properties of AZ91D Mg Alloy by Friction Stir Welding［J］. International Journal of Structural Integrity，2020，11（6）：769- 782.
赵啸. 铝/铜双金属层状复合板搅拌摩擦焊接技术研究［D］. 辽宁：沈阳航空航天大学， 2022： 6-20.
ZHAO X. Research On Friction Stir Welding Of AL-Cu Bimetallic Sheets［D］. Liaoning：Shenyang Aerospace University，2022：6-20.
BAKKIYARAJ M，BERNARD S S，SAIKRISHNAN G，et al. Effect of Tool Offset Condition on Mechanical and Metallurgical Properties of FSW Dissimilar Al-Cu Joint［J］. Materials Today：Proceedings， 2021，43：824- 827.
KP Y. Impact of Ultrasonic Vbration Power and Tool Pin Profile on Mechanical and Microstructural Behaviour of Friction Stir Welded Dissimilar Aluminium Alloy Joints［J］. Aircraft Engineering and Aerospace Technology，2023，95（5）：685-696.
NM S. Influence of Friction Stir Welding Parameters on the Tribological Behavior of Dissimilar Aluminum Alloy Joint［J］. Industrial Lubrication and Tribology，2023，75（2）：197-203.
徐萌，李文晓，徐晓霞，等. 铜铝异种材料搅拌摩擦焊接头组织和力学性能分析［J］. 电焊机，2020，50（10）：1-6+125.
XU M，LI W X，XU X X，et al. Analysis of Microstructure and Mechanical Properties of Friction Stir Weldedoint of Cu/Al Dissimilar Materials［J］. Electric Welding Machine，2020，50（10）：1-6+125.
秦佳琛. 6061铝合金/纯铜异种金属搅拌摩擦焊接头组织与力学性能研究［D］. 广东：华南理工大学， 2023：16-25.
QIN J C. Research on Microstructure and Mechanical Propertiesof Dissimlar Friction Stir Welded 6061 Aluminum Alloy/Pure Copper Joints［D］.Guangzhou：South China University of Technology，2023：16-25.
XUE P，XIAO B L，NI D R，et al. Enhanced Mechanical Properties of Friction Stir Welded Dissimilar Al-Cu Joint by Intermetallic Compounds［J］. Materials Science & Engineering A，2010，527（21-22）：5723-5727.
BALAJI S，K B. Conventional and Underwater Friction Stir Welded AA2024-T351 Aluminium Alloy–a Comparative Analysis［J］. World Journal of Engineering， 2020，17（6）：795-801.
GALVAO I，LEAL R M，LOUREIRO A，et al. Material Flow in Heterogeneous Friction Stir Welding of Aluminium and Copper Thin Sheets［J］. Science and Technology of Welding and Joining，2010，15（8）：654-660.
LI X，ZHANG D，CHENG Q I U，et al. Microstructure and Mechanical Properties of Dissimilar Pure Copper/1350 Aluminum Alloy Butt Joints by Friction Stir Welding［J］. Transactions of Nonferrous Metals Society of China，2012，22（6）：1298-1306.
柯黎明，刘鸽平，邢丽，等. 铝合金LF6 与工业纯铜T1的搅拌摩擦焊工艺［J］. 中国有色金属学报，2004，14（9）：1534-1538.
KE L M，LIU G P，XING L，et al. Friction Stir Welding Process of Aluminum Alloy LF6 and Industrial Pure Copper T1［J］. Transactions of Nonferrous Metals Society of China，2004，14（9）：1534-1538.
倉林康太，三村俊介，佐藤裕，等. Al/Cu摩擦攪拌接合継手の引張せん断強度に及ぼすNi添加の影響［C］//溶接学会全国大会講演概要，2022.
相关作者
相关机构
公网安备11010802024621