基于结构应力法的碳钢焊接结构疲劳评估

于帮龙; 王苹; 刘永; 宋晓国; 方洪渊

doi:10.7512/j.issn.1001-2303.2024.08.08

焊接虚拟仿真 | 浏览量 : 0 下载量: 10 CSCD: 0

PDF
导出
分享
收藏
专辑

基于结构应力法的碳钢焊接结构疲劳评估
Fatigue Evaluation of Welded Steel Structures Based on Traction Structural Stress Method
2024年54卷第8期页码：65-71
纸质出版日期： 2024-08-25 ，
DOI： 10.7512/j.issn.1001-2303.2024.08.08
稿件说明：

扫描看全文

于帮龙，王苹，刘永，等.基于结构应力法的碳钢焊接结构疲劳评估［J］.电焊机，2024，54（8）：65-71.

YU Banglong, WANG Ping, LIU Yong, et al.Fatigue Evaluation of Welded Steel Structures Based on Traction Structural Stress Method[J].Electric Welding Machine, 2024, 54(8): 65-71.
于帮龙，王苹，刘永，等.基于结构应力法的碳钢焊接结构疲劳评估［J］.电焊机，2024，54（8）：65-71. DOI： 10.7512/j.issn.1001-2303.2024.08.08.

YU Banglong, WANG Ping, LIU Yong, et al.Fatigue Evaluation of Welded Steel Structures Based on Traction Structural Stress Method[J].Electric Welding Machine, 2024, 54(8): 65-71. DOI： 10.7512/j.issn.1001-2303.2024.08.08.

摘要

焊接结构服役安全与寿命一直备受关注，在断裂力学的基础上建立的Master S-N曲线适用于不同接头形式的焊接钢结构抗疲劳设计。文中基于网格不敏感性的结构应力法对正交异性桥面板、T型接头、平板和管板焊接结构进行了疲劳性能评估。在疲劳评估的过程中，量化分析了焊接变形、焊缝尺寸、焊后残余应力等因素对复杂焊接结构的影响，并分别以角变形、平均应力为修正系数对疲劳数据进行修正。结果表明，正交异性桥面板结构、考虑角变形后的T形接头、考虑残余应力影响的平板和管板结构的疲劳数据均处于Master S-N曲线的两倍误差带以内，证实Master S-N曲线是焊接结构抗疲劳设计的首选曲线。

Abstract

The service safety and service life of welded structures have always been concerned. The Master S-N curve established on the basis of fracture mechanics is suitable for the anti-fatigue design of steel welded structures with different types of joints. In this paper

the fatigue properties of orthotropic bridge decks

T-joints

plate and tube-plate welded structures are evaluated based on the mesh-insensitive structural stress method. In the process of fatigue assessment

the effects of welding deformation

weld size and residual stress on complex welding structures are quantitatively analyzed

and the fatigue data are modified with angular deformation and average stress as correction coefficients respectively. The results show that the fatigue data of orthotropic bridge deck

T-joint considering angular deformation

plate and tube-plate structure considering the effect of residual stress are all within a 95% confidence interval of Master S-N curve. It is proved that Master S-N curve is the preferred curve for anti-fatigue design of welded structures.

关键词

焊接钢结构疲劳评估Master S-N曲线补焊残余应力

Keywords

welded steel structurefatigue assessmentmaster S-N curverepair-weldedresidual stress

references

李晓延，武传松，李午申. 中国焊接制造领域学科发展研究［J］. 机械工程学报，2012，48（6）：19-31.

LI X Y，WU C S，Li W S. Research on discipline Development in the Field of Welding Manufacturing in China［J］. Journal of Mechanical Engineering，2012，48（6）：19-31.

Zerbst U，Madia M，Klinger C，et al. Defects as a root cause of fatigue failure of metallic components I： Basic aspects［J］. Engineering Failure Analysis，2019，97：777-792.

王苹，裴宪军，钱宏亮，等. 焊接结构抗疲劳设计新方法与应用［J］. 机械工程学报，2021，57（16）：349-360.

WANG P，PEI X J，QIAN H L，et al. New method and application of anti-fatigue design for welded structures［J］. Journal of Mechanical Engineering，2021，57（16）：349-360.

Chen Z H，Yu B L，Wang P，et al. Fatigue properties evaluation of fillet weld joints in full-scale steel marine structures［J］. Ocean Engineering，2023，270：104852.

Dong P S. A structural stress definition and numerical implementation for fatigue analysis of welded joints［J］. International Journal of Fatigue，2001，23（10）：865-876.

ASME，boiler and pressure vessel code， Sec VIII， Div. 2 （ASME BPVC-VIII-2 e2007）［S］. American Society of Mechanical Engineers， New York，2007.

Xing S Z，Dong P S. An analytical SCF solution method for joint misalignments and application in fatigue test data interpretation［J］. Marine structures，2016，50：143-161.

Wang P，Pei X J，Dong P S，et al. Traction structural stress analysis of fatigue behaviors of rib-to-deck joints in orthotropic bridge deck［J］. International Journal of Fatigue，2019，125：11-22.

Zhao P，Yu B L，Wang P，et al. Influence of Repair Welding on the Fatigue Behavior of S355J2 T-Joints［J］. Materials，2023，16（10）：3682.

Yu B L，Liu Y，Wang P，et al. Fatigue behavior of SMA490BW welded components considering AHT with traction structural stress［J］. Journal of Construction Steel Research，2024，214：108469.

Dong P S，Hong J. Fracture mechanics treatment of residual stresses in defect assessment［J］. Welding in the World，2004，48：19-27.

Dong P S，Hong J，Osage D，et al. The master SN curve method： an implementation in 2007 ASME Div 2 international codes for boilers and pressure vessels［J］. Welding Research Council Bulletin，2010（TN.523）：1-252.

Mei J F，Vasu A，Jacob S，et al. A method for treating residual stress effects in traction structural stress based approach and validation on a welded component［J］. International Journal of Fatigue，2023，167：107347.

Yu B L，Wang P，Song X G，et al. The residual stress relief of post weld heat treatment in SMA490BW welded joints： Simulation and experiment［J］. International Journal of Pressure Vessels and Piping，2022，200：104852.

ASME boiler and pressure vessel code， Rules for Inservice Inspection of Nuclear Power Plant Components［S］. Section XI， Division 1， ASME， New York，2013.

文章被引用时，请邮件提醒。

提交

焊趾熔修和超声冲击处理对船用钢焊接接头的影响

基于ABAQUS的单丝双面气电立焊数值模拟

基于水雾在线冷却的钛合金激光焊接应力变形研究

焊趾工艺优化对压力管道对接接头残余应力的影响

SMA490BW耐候钢焊接与焊后热处理残余应力的数值模拟