窄搭接电阻缝焊过程中焊轮打火的解决方法

李燕; 吴观虎

doi:10.7512/j.issn.1001-2303.2024.05.19

焊接工艺 | 浏览量 : 0 下载量: 1 CSCD: 0

PDF
导出
分享
收藏
专辑

窄搭接电阻缝焊过程中焊轮打火的解决方法
Solution to Welding Wheel Ignition in the Narrow Lap Resistance Seam Welding Process
2024年54卷第5期页码：130-134
纸质出版日期： 2024-05-25 ，
DOI： 10.7512/j.issn.1001-2303.2024.05.19

扫描看全文

李燕，吴观虎.窄搭接电阻缝焊过程中焊轮打火的解决方法［J］.电焊机，2024，54（5）：130-134.

LI Yan, WU Guanhu.Solution to Welding Wheel Ignition in the Narrow Lap Resistance Seam Welding Process[J].Electric Welding Machine, 2024, 54(5): 130-134.
李燕，吴观虎.窄搭接电阻缝焊过程中焊轮打火的解决方法［J］.电焊机，2024，54（5）：130-134. DOI： 10.7512/j.issn.1001-2303.2024.05.19.

LI Yan, WU Guanhu.Solution to Welding Wheel Ignition in the Narrow Lap Resistance Seam Welding Process[J].Electric Welding Machine, 2024, 54(5): 130-134. DOI： 10.7512/j.issn.1001-2303.2024.05.19.

摘要

连续热镀铝锌生产线的窄搭接电阻缝焊过程中常出现焊轮打火问题，导致焊缝质量下降造成断带，从而引发产线停机，因此需要对电阻焊过程中焊轮打火的原因进行分析。主要针对焊接电流、焊轮与钢带之间的接触电阻、钢带与钢带之间的接触电阻等因素进行探讨。分析发现，焊轮与钢带之间的接触电阻增大是导致焊轮打火的主要原因：焊轮表面的污染物会显著增加接触电阻，导致热量过大，烧穿焊缝；钢带表面的清洁度也对接触电阻有显著影响，导致电流分布不均，产生打火。此外，根据钢带厚度选择合适的焊接电流对于控制焊接过程中的打火现象也至关重要。

Abstract

During the narrow lap resistance seam welding process in the continuous hot-dip aluminum-zinc production line

a common problem of welding wheel ignition occurs

leading to a decline in weld quality and causing breakage

which in turn leads to production line shutdowns. Therefore

it is necessary to analyze the causes of welding wheel ignition during the resistance welding process. The main factors discussed are welding current

contact resistance between the welding wheel and the steel strip

and contact resistance between the steel strips themselves. The analysis found that the increase in contact resistance between the welding wheel and the steel strip is the main reason for the welding wheel ignition: pollutants on the surface of the welding wheel significantly increase the contact resistance

leading to excessive heat and burning through the weld; the cleanliness of the steel strip surface also significantly affects the contact resistance

leading to uneven current distribution and causing ignition. In addition

selecting the appropriate welding current according to the thickness of the steel strip is also crucial for controlling the ignition phenomenon during the welding process.

关键词

连续热镀铝锌线窄搭接电阻焊焊缝质量焊轮火花

Keywords

hot-dip aluminum zinc production linemash lap resistance seam welderweld qualitywelderspark

references

刘宏强. 热轧钢带连续热镀锌生产实践［J］. 河北冶金，2012（6）：41-43.

LIU H Q. Production Practice of Hot Continuous Galvanizing of Hot-Rolling Steel Strip［J］. Hebei Metallurgy， 2012（6）：41-43.

李梁，余平，沈兰. 米巴赫电阻搭接焊机在镀锌线上的应用与维护［J］. 四川冶金，2001（2）：18.

LI L，YU P，SHEN L. Application and Maintenance of Mibach Resistance Lapping Welding Machine on Galvanizing Line［J］. Sichuan Metallurgy，2001（2）：17-18.

岑耀东，陈芙蓉. 带钢连续热镀锌窄搭接焊机的故障分析及对策［J］. 电焊机，2015，45（9）：76-79.

CEN Y D，CHEN F R. Failure analysis and strategy of the strip continuous hot dip galvanized mash lap seam welder［J］. Electric Welding Machine，2015，45（9）：76-79.

刘超. 连续热镀锌带钢表面缺陷原因分析及解决措施［J］. 鞍钢技术，2017（6）：62-65.

LIU C. Analysis on Causes Leading to Defects on the Surface of Continuous Hot-dip Galvanizing Steel Strips and Countermeasures for the Defects［J］. Angang Technology，2017（6）：62-65.

任予昌，张东方，欧阳娜，等. 窄搭接焊机质量控制分析及管理要素［C］//中国金属学会：第十一届中国钢铁年会论文集，2017：1-6.

孙鹏，马宁，卢国良. 镀锌线窄搭接焊机及其控制［C］//全国冶金自动化信息网2010年年会论文集，2010：121-123.

陈相帅. 连续退火线带钢焊接质量探讨［J］. 本钢技术，2010（3）：25-27.

CHEN X S. Research about Welding Quality in the Continuous Annealing Line［J］. BenGangJiShu，2010（3）：25-27.

干治江. 窄搭接电阻焊机的焊接质量热态控制系统［J］. 冶金设备，2009（1）：49-51.

GAN Z J. Welding Quality Thermal Control System With Resistance Welder for Narrow Lap Welding［J］. Metallurgical Equipment， 2009（1）：49-51.

郑玉福. 镀锌线Minilap Welder型电阻缝焊机故障分析及对策［J］. 冶金设备，2011（5）：73-76.

ZHENG Y F. Fault Analysis and Measure of Minilap Type Resistance Welder in Galvanizing Line［J］. Metallurgical Equipment，2011（5）：73-76.

编辑部网址：http：//www.71dhj.comhttp://www.71dhj.com

文章被引用时，请邮件提醒。

提交

铜中间层对不锈钢-铝合金激光搭接焊质量的影响