扫 描 看 全 文
肖华，彭必荣，欧阳忠华.不同保护气体对连续激光线焊熔池的影响研究［J］.电焊机，2023，53（10）：103-108.
XIAO Hua, PENG Birong, OUYANG Zhonghua.Effect of Different Shielding Gas on Molten Pool of Laser Welding[J].Electric Welding Machine, 2023, 53(10): 103-108.
为研究低功率光纤激光器连续激光线焊工艺过程中不同类型保护气体对焊接熔池的影响，选用304不锈钢作试验材料，对比无保护气、压缩空气、氮气、氩气和氦气5种保护气体模式下连续激光线焊工艺方式得到的焊缝外观情况及熔池形貌。试验结果表明，相较于无保护气体模式，保护气体模式下熔池成形更加稳定，焊缝边缘平整，外观缺陷相对较少；在保护气体的作用下，熔池截面呈特殊的“钉头型”。不同类型保护气体会对熔池尺寸产生一定影响。试验条件下，相较于无保护气体，在氮气条件下，焊缝熔宽均值增加44.7%，熔深均值增加16%；氩气条件下，熔宽均值增加55.3%，熔深均值增加8.9%；而氦气条件下，熔宽均值增加59.6%，熔深情况变化不大。焊接氛围气体导热系数、氛围气体电离能和吹气散热效应是导致差异的主要原因。生产中兼顾焊接效果及经济成本，在薄板低功率精密焊接过程中，采用氩气作保护气体是较佳的选择。
In order to study the effect of different types of shielding gas on the welding pool of continuous laser line welding with low-power fiber laser, SUS304 stainless steel is selected as the test material to compare the jointed appearance and welding pool of continuous laser line wielding under five air blowing modes: no-air blowing, compressed air, N,2, Ar, He. The results show that the welding pool obtained by laser welding in the air-blowing mode is more stable with much less defects appearance. The cross section of the molten pool has a special "nail head shape" under the action of the shielding gas. Different types of shielding gases will have a certain impact on the size of the weld pool after welding. Compared with welding without blowing under the test conditions, the average weld width increases by 44.7% and the average penetration increases by 16% under the N,2, condition, 55.3% and 8.9% under the Ar condition. Under the He condition, the average weld width increased by 59.6%, and the penetration didn't change much. The difference is caused by the ionization of atmospheric gas and the "blowing heat dissipation effect". In production, considering the welding effect and economic cost, using argon gas as a protective gas is a better choice in low-power precision welding of thin plates.
连续激光线焊接保护气体焊缝外观焊接熔池吹气散热效应
continuous laser line weldingprotective gasweld appearancewelding poolblowing heat dissipation effect
刘必利， 谢颂京， 姚建华. 激光焊接技术应用及其发展趋势［J］. 激光与光电子学进展， 2005（09）：43-47.
LIU B L， XIE S J， YAO J H. Application and development trend of laser welding technology［J］. Laser & Optoelectronics Progress， 2005（09）：43-47.
郑喜军. 激光焊接技术综述［J］. 河南科技， 2013（07）： 38-40
ZHENG X J. Summary of laser welding technology［J］. Henan Science and Technology， 2013（07）： 38-40.
Kern M， Beck M， Berger P. Process stabilizing potential of shielding gas mixtures［C］//SPIE， 1997， 3092： 526-529.
洪蕾，吴刚，陈武柱.保护气流对CO2激光焊接铝合金的影响［J］. 中国激光， 2005， 32（11）： 1571-1576.
HONG L， WU G， CHEN W Z. Effect of shielding gas flow on CO2 laser welding of aluminum alloy［J］. Chinese Journal of Lasers，2005，32（11）：1571-1576.
肖荣诗，梅汉华，左铁钏. 辅助气体对CO2激光焊接光致等离子体屏蔽的影响［J］.中国激光，1998，A25（11）：1046-1050.
XIAO R S， MEI H H， ZUO T X. Influence of auxiliary gas on shielding of CO2 laser welding induced plasma［J］. Chinese Journal of Lasers，2005，32（11）： 1571-1576.
李明星，胡治华，陈铠.保护气体种类对镀锌板激光焊接性的影响［J］.激光杂志，2006，27（6）：72-73.
LI M X， HU Z H， CHEN K. Influence of shielding gas types on Laser Weldability of galvanized sheet［J］. Laser Journal. 2006，27（6）：72-73.
刘键，石岩，刘佳，等. 保护气体对奥氏体不锈钢激光焊接的影响［J］. 激光与光电子学进展，2014（05）：1-6.
LIU J， SHI Y， LIU J，et al. Effect of shielding gas on laser welding of austenitic stainless steel［J］. Laser & Optoelectronics Progress， 2014（05）：1-6.
Richard Green， 钟奎. 合理选择保护气体以降低焊接成本［J］. 国外机车车辆工艺. 2008（02）：37-38+42.
Richard Green， ZHONG K. Reasonable selection of shielding gas to reduce welding cost［J］. Foreign Locomotive & Rolling Stock Technology，2008（02）：37-38+42.
高宾， 邓琦林， 周春燕. 钛合金激光焊接过程中气体保护问题的研究［J］. 电加工与模具，2009（5）：44-49.
GAO B， DENG Q L， ZHOU C Y. Study of gas protection in laser welding of titanium alloy［J］. Electromachining & Mould， 2009（5）：44-49.
邓时累.光纤激光厚板深熔焊蒸气羽烟抑制及焊缝成形控制研究［D］.湖南：湖南大学，2019.
DENG S L.Study on vapor plume suppression and weld formation control in fiber laser deep penetration welding of thick plate［D］. Hunan：Hunan University，2019.
杜汉斌. 钛合金激光焊接及其熔池流动场数值模拟［D］. 湖北：华中科技大学， 2004.
DU H B. Laser welding of titanium alloy and numerical simulation of flow field in molten pool［D］. Hubei： Huazhong University Of Science And Technology， 2004.
Ai Y W， Jiang P，Shao X Y， et al. The prediction of the whole weld in fiber laser keyhole welding based on numerical simulation［J］. Applied Thermal Engineering， 2017（113）：980-993.
相关文章
相关作者
相关机构
公网安备11010802024621