扫 描 看 全 文
引用
高山，袁明强.Ti60/TC17异种钛合金惯性摩擦焊接头组织性能研究［J］.电焊机，2023，53（8）：115-121.
GAO Shan, YUAN Mingqiang.Study on the Microstructure and Properties of Ti60/TC17 Dissimilar Titanium Alloy Inertia Friction Welded Joints[J].Electric Welding Machine, 2023, 53(8): 115-121.
采用惯性摩擦焊技术焊接Ti60/TC17钛合金，并对焊态/热处理态接头进行组织和性能分析；焊接过程中，有粘流态金属滴落，两侧金属材料熔合较好，且接头焊缝处飞边形貌呈现不规则曲线状，缩短量达4.2 mm，轴向错边小于0.3 mm；焊缝界面两侧区域均发生了动态再结晶，焊缝区显微硬度值较高，越远离焊缝位置显微硬度值越低；焊态下，焊缝处组织为针状α板条和等轴晶粒组成，两侧热机影响区有明显的流线形貌；热处理后，焊缝处针状α板条细化，次生α相增多，再结晶晶界明显，两侧热机影响区流线形貌消失；通过接头拉伸性能测试，焊态/热处理态试样室温拉伸断裂位置均发生在TC17侧，断口形貌呈典型解理断裂，焊态下，平均抗拉强度为978.5 MPa，达母材的92.06%，热处理后，平均抗拉强度为1 076.5 MPa，提升98 MPa，超过母材抗拉强度，这说明热处理有利于将组织内的残余应力释放，同时易于析出针状α相，进而提高接头力学性能。
This article mainly uses inertial friction welding technology to connect Ti60/TC17 alloy, and analyzes the microstructure and properties of the welded/heat treated joints; During the weld process, there was viscous flow of metal droplets, and the metal materials on both sides fused well. The morphology at the welded joints presented an irregular curve shape, with a reduction of 4.2 mm and an axial misalignment of less than 0.3 mm; Dynamic recrystallization occurred on both sides of the weld interface, resulted in a higher microhardness values in the weld zone, and a lower microhardness value was further away from the weld; In the welded state, the structure of the weld was composed of acicular α slats and equiaxed grains, the heat engine affected zone on both sides had obvious streamline morphology; After heat treatment, the weld was needle shaped α flat noodles refinement, secondary α the phase increases, the recrystallization grain boundaries was obvious, and the streamline morphology of the heat affected zone on both sides disappeared; Through joint tensile performance test, the tensile fracture positions of the welded/heat treated specimens at room temperature occurred on the TC17 side, and the fracture morphology showed typical cleavage fracture. In the welded state, the average tensile strength was 978.5 MPa, reaching 92.06% of the base metal. After heat treatment, the average tensile strength was 1 076.5 MPa, an increase of 98 MPa, exceeding the tensile strength of the base metal. This indicates that heat treatment was beneficial for releasing residual stress in the organization and was easy to precipitate needle like structures α Phase, thereby improving the mechanical properties of the welded joint.
钛合金惯性摩擦焊异种材料焊接接头力学性能
titanium alloyinertia friction weldeddissimilar materialdissimilar jointsmechanical properties
方乃文，郭二军，徐锴，等. 钛合金激光填丝焊缝晶粒生长及相变原位观察［J］.中国有色金属学报，2022，32（6）：1665-1672.
FANG N W， GUO E J， XU K， et al. In-situ Observation of Grain Growth and Phase Transformation in Laser Welding of Titanium Alloy with Filler Wire［J］. The Chinese Journal of Nonferrous Metals， 2022， 32（6）：1665-1672.
方乃文，黄瑞生，龙伟民，等.填充金属对TC4钛合金激光填丝焊接头组织性能影响［J］.稀有金属材料与工程，2023，52（05）：1725-1736.
FANG N W，HUANG R S，LONG W M， et al. Effect of Filler Metal on Microstructure and Properties of Titanium Alloy Laser Welding Joints with Filler Wire［J］.Rare Metal Materials and Engineering， 2023， 52（05）：1725-1736.
滕怀亮，谭林月，王淑金.关于某型航空发动机高压压气机转静子碰磨问题分析与预防［J］.中文科技期刊数据库（全文版）工程技术， 2022（12）：5-8.
TENG H L，TANG L Y， WANG S J. Analysis and Prevention of Rubbing of the High Pressure Compressor Stator in a Certain Aeroengine［J］. Chinese Science and Technology Journal Database （Full Text Edition） Engineering Technology， 2022（12）：5-8.
戎旭东，黄陆军，王博，等.热处理对魏氏组织Ti60合金组织与性能的影响［J］. 材料热处理学报， 2015， 36（10）：39-45.
RONG X D，HUANG L J，WANG B， et al. Effect of Heat Treatment on the Structure and Properties of Ti60 Alloy with Weinstein Structure ［J］， Journal of Materials Heat Treatment， 2015， 36（10）：39-45.
季亚娟，张田仓，李晓红.TC11/TC17钛合金线性摩擦焊接头组织与性能［J］.航空制造技术，2011（8）：66-69.
JI Y J， ZHANG T C，LI X H. Microstructure and Properties of TC11/TC17 Titanium Alloy Linear Friction Welded Joint［J］. Aviation Manufacturing Technology， 2011（8）： 66-69.
耿培皓，秦国梁. 惯性摩擦焊接技术及其在航空工业领域的应用［J］. 精密成形工程，2017， 9（5）：73-82.
GENG P H， QIN G L. Inertia Friction Welding Technology and Its Application in Aviation Industry Field［J］. Journal of Netshape Forming Engineering，2017，9（5）：73-82.
陈玉华， 邓怀波， 许明方， 等. 镍钛形状记忆合金/钛合金异种材料焊接研究进展［J］. 电焊机， 2020， 50（9）： 177-185.
CHEN Y H， DENG H B， XU M F， et al. Research progress in dissimilar welding of Nitinol shape memory alloy to Titanium alloy［J］. Electric Welding Machine，2020， 50（9）：177-185.
张露，韩秀峰，阮雪茜. 惯性摩擦焊在商用航空发动机中的应用与研究现状［J］. 电焊机，2022，52（5）：91-98.
ZHANG L， HAN X F， RUAN X Q. Application and Research Status of Inertia Friction Welding inCommercial Aeroengine［J］. Electric Welding Machine， 2022， 52（5）： 91-98.
QIN F ， ZHANG C B， ZHOU J， et al. Microstructure and Mechanical Properties of Aluminum Alloy Stainless Steel Dissimilar Ring Joint Welded By Inertia Friction Welding［J］. Frontiers in Materials， 2021， 8： 561.
李睿， 张春波， 周军，等. Ti52钛合金/304不锈钢异种材料惯性摩擦焊接技术研究［J］. 电焊机， 2022， 52（06）： 70-77.
LI R， ZHANG C B，ZHOU J， et al. Research on Inertial Friction Welding Technology for Ti52 Titanium Alloy/304 Stainless Steel Heterogeneous Materials ［J］. Electric welding machine， 2022， 52（06）： 70-77.
乌彦全， 周军， 张春波，等. α+β型钛合金惯性摩擦焊接头焊态/热处理态组织特征及性能［J］. 稀有金属材料与工程， 2022， 51（06）： 2144-2150.
WU Y Q， ZHOU J， ZHANG C B， et al. α+β Microstructure Characteristics and Properties of Inertia Friction Welded Joints of Type Titanium Alloy in the Welded/heat Treated State［J］. Rare Metal Materials and Engineering， 2022， 51（06）： 2144-2150.
Cheng C ， Yu B B， Chen Z Y， et al. Mechanical Properties of Electron Beam Welded Dissimilar Joints of TC17 and Ti60 Alloys［J］. Journal of Materials Science & Technology 2018， 34（10）：8.
张田仓，李晶，季亚娟，等. TC4钛合金线性摩擦焊接头组织和力学性能［J］.焊接学报， 2010（02）：53-56.
ZHANG T C，LI J，JI Y J， et al. Microstructure and Mechanical Properties of TC4 Titanium Alloy Linear Friction Welding Joint［J］. Transactions of the China Welding Institution， 2010（02）： 53-56.
周军，梁武，张春波，等.TC17钛合金线性摩擦焊接头组织及力学性能分析［J］.焊接学报， 2020（5）：36-41.
ZHOU J，LIANG W，ZHANG C B， et al. Analysis of Microstructure and Mechanical Properties of TC17 Titanium Alloy Linear Friction Welded Joints［J］. Transactions of the China Welding Institution，2020（5）：36-41.
相关作者
相关机构
公网安备11010802024621