核电领域激光焊接技术的研究与应用现状
Research and Application of Laser Welding in Nuclear Power Field
- 2023年53卷第7期 页码:81-89
DOI: 10.7512/j.issn.1001-2303.2023.07.12
扫 描 看 全 文
扫 描 看 全 文
陈挥扬,卓理政,崔运佳,等.核电领域激光焊接技术的研究与应用现状[J].电焊机,2023,53(7):81-89.
CHEN Huiyang, ZHUO Lizheng, CUI Yunjia, et al.Research and Application of Laser Welding in Nuclear Power Field[J].Electric Welding Machine, 2023, 53(7): 81-89.
核电厂的建造与运行是一个极其复杂的系统,焊接是其设备制造、装配、检修等过程中必不可少的重要工艺之一,焊缝质量的好坏直接关系到核电厂设备的可靠性和运行状态。相较于传统焊接工艺,使用激光焊接不仅能改善焊接质量,减少变形和残余应力,还能够提高效率,缩短工期。但目前在核电领域,激光焊接技术的应用并不多。为推广激光焊接技术在核电领域的应用,介绍了近年来激光焊接核级材料的研究现状。包括对常见的Zr合金、不锈钢以及新型材料等的激光焊接性能研究;分析其在核电厂设备的维修以及制造等领域的应用与研究现状。在此基础上,对目前核电厂激光焊接技术应用较少的原因进行分析,并对其将来的研究方向进行展望。
The construction and operation of nuclear power plant is an extremely complicated system. Welding is one of the essential technic in the process of equipment manufacturing, assembly, maintenance and so on. The quality of weld directly affects the reliability and running state of nuclear power equipment. Compared with traditional process, laser welding can not only improve weld quality, reduce deformation and residual stress, but also raise efficiency and shorten the construction period. However, this technology is not widely used in nuclear power field. In order to promote the application of laser welding in nuclear field, the research status that about laser welding of nuclear grade materials in recent years is introduced. Including the research of laser welding properties of Zr alloy, stainless steel and new materials, etc. Its application and research status on nuclear power plant equipment maintenance and manufacturing are analyzed. On this basis, the reasons for the low application of laser welding in nuclear power plants are analyzed, and the future research directions are prospected.
激光焊接核级材料核电设备焊接性能
laser weldingnuclear grade materialsnuclear power equipmentwelding properties
张建超,乔俊楠,吴世凯,等.低活化铁素体/马氏体钢厚板光纤激光焊接接头组织及力学性能分析[J]. 焊接学报,2018,39(04):124-128+134.
ZHANG J C,QIAO J N,WU S K,et al. Microstructure and mechanical properties of fiber laser welded joints of reduced activation ferritic/martensitic CLF-1 steel heavy plate[J]. Transactions of the China Welding Institution,2018,39(04):124-128+134.
Wu S, Zhang J, Yang J, et al. Investigation on microstructure and properties of narrow-gap laser welding on reduced activation ferritic/martensitic steel CLF-1 with a thickness of 35 mm[J]. Journal of Nuclear Materials, 2018, 503: 66-74.
Wu S, Shi Y, Liao H, et al. Microstructure and mechanical properties of LBW and EBW weld joints of CLF-1 steel: A comparative analysis[J]. Journal of Nuclear Materials, 2021, 549: 152914.
徐国建,井志成,张国瑜,等. 激光焊接核电用CLF-1钢的组织与性能[J]. 沈阳工业大学学报, 2022, 44(03):277-282.
XU G J,JING Z C,ZHANG G Y,et al.Microstructures and properties of CLF-1 steel for laser welding in nuclear power plant[J]. Journal of Shenyang University of Technology, 2022, 44(03):277-282.
Rudling P, Adamson R, Cox B, et al. High burnup fuel issues[J]. Nuclear Engineering and Technology, 2008, 40(1): 1-8.
Srivastava D, Mani Krishna K V, Neogy S, et al. Evolution of Microstructure, Microtexture and Texture in Dilute Zirconium Based Structural Components of Pressurised Heavy Water Reactors[C]//International Conference on Nuclear Engineering, 2009: 401-409.
Slobodyan M. Resistance, electron-and laser-beam welding of zirconium alloys for nuclear applications: a review[J]. Nuclear Engineering and Technology,2021,53(4): 1049-1078.
Bharadwaj V, Rai A K, Upadhyaya B N, et al. A study on effect of heat input on mode of welding, microstructure and mechanical strength in pulsed laser welding of Zr-2.5 wt.% Nb alloy[J]. Journal of Nuclear Materials, 2022, 564: 153685.
Rahman M, Seah W K H, Teo T T. The machinability of Inconel 718[J]. Journal of materials processing technology, 1997, 63(1-3): 199-204.
Kim J D, Moon J H. C-ring stress corrosion test for Inconel 600 and Inconel 690 sleeve joint welded by Nd: YAG laser[J]. Corrosion Science, 2004, 46(4): 807-818.
Thejasree P, Manikandan N, Raju R, et al. Investigations on laser beam welded Inconel 718 weldments[J]. Materials Today: Proceedings, 2022,68: 1757-1761.
陆永浩,罗奎林,曹鑫源,等.激光焊接速度对核级不锈钢腐蚀性能的影响[J].焊接学报,2015,36(10):37-40+115.
LU Y H,LUO K L,CAO X Y,et al. Influence of laser welding speed on corrosion property of nuclear grade stainless steel[J]. Transactions of the China Welding Institution,2015,36(10):37-40+115.
Gussev M N, Zhong W, Garner F A, et al. Microstructure analysis of laser beam weldments performed on neutron-irradiated 304L steel containing 3 and 8 appm helium[J]. Journal of Nuclear Materials, 2022, 563: 153638.
Chen J, Tatman J, Feng Z, et al. Suppression of Helium Induced Cracking in Laser Repair Welding of Highly Irradiated Stainless Steels[J]. Journal of Nuclear Materials, 2021, 556: 153206.
张正浩,王传强,齐恩语,等.核级高硅含钛不锈钢激光-电弧复合焊接工艺及接头组织性能[J].中国激光,2021,48(14):81-91.
ZHANG Z H,WANG C Q,QI E Y,et al. Laser-Arc Hybrid Welding Process and Joint Microstructure and Properties of Nuclear Grade High Silicon Titanium-containing Stainless Steel[J]. Chinese Journal of Lasers,2021,48(14):81-91.
Field K G, Briggs S A, Sridharan K, et al. Mechanical properties of neutron-irradiated model and commercial FeCrAl alloys[J]. Journal of Nuclear Materials, 2017, 489: 118-128.
Hu Y, Niu Y, Zhang Q, et al. Synergistic effect of Laves phase evolution and porosity defects in nuclear-grade FeCrAl alloy laser welded joints: Experiments and crystal plasticity modeling[J]. Optics & Laser Technology, 2023, 157: 108694.
蒋立佳. 核主泵屏蔽套激光焊接质量对涡流损耗的影响[D].辽宁:大连理工大学,2010.
JIANG L J. Effect of Laser Welding Quality of Nuclear Reactor CoolantPump Can on Eddy Current Losses[D].Liaoning: Dalian University of Technology,2010.
Guo Y Q, Guo D M, Ma G Y, et al. Numerical and experimental investigation of pulsed laser welding of Hastelloy C-276 alloy sheets[J]. Advanced Materials Research, 2011, 154: 1468-1471.
郭玉泉,吴东江,马广义,等.夹具拘束距离对Hastelloy C-276薄板脉冲激光焊接变形的影响[J].光学精密工程,2012,20(11):2465-2471.
GUO Y Q,WU D J,MA G Y,et al. Influence of fixture restraint distance on pulsed laser welding distortion of Hastelloy C-276 thin sheet[J]. Optics and Precision Engineering,2012,20(11):2465-2471.
Guo Y, Wu D, Ma G, et al. Trailing heat sink effects on residual stress and distortion of pulsed laser welded Hastelloy C-276 thin sheets[J]. Journal of Materials Processing Technology, 2014, 214(12): 2891-2899.
马广义,吴东江,柴东升,等.核主泵屏蔽套近无缺陷激光焊接技术[J].机械工程学报,2015,51(15):1-8.
MA G Y,WU D J,CAI D S,et al. Near-free-defect Laser Welding of AP1000 Nuclear Reactor Coolant Pump Can[J]. Journal of Mechanical Engineering,2015,51(15):1-8.
吴东江,刘俊,唐博凯,等.工艺参数对哈氏合金薄板激光填丝焊接变形的影响[J].激光与光电子学进展,2020,57(13):221-227.
WU D J,LIU J,TANG B K,et al. Effect of Parameters on Welding Deformation of Laser Welding Hastelloy Thin Sheets with Filler Wire[J]. Laser & Optoelectronics Progress,2020,57(13):221-227.
于京令,刘大为,宋丹,等.哈氏合金薄板激光填丝焊接接头高周疲劳性能[J].电焊机,2019,49(04):37-42.
YU J L,LIU D W,SONG D,et al. High cycle fatigue strength of laser welding Hastelloy C-276 with filler wire[J]. Electric Welding Machine,2019,49(04):37-42.
程波. Hastelloy C-276/SS304异质金属激光填丝焊接成形机理及工艺[D].辽宁:大连理工大学,2021.
CHENG B. Formation Mechanism and Processing of Hastelloy C276/Stainless Steel 304 Dissimilar Metals Laser Welding with Filler Wire[D]. Liaoning: Dalian University of Technology,2021.
王伟,王泽明,魏连峰,等.水下激光加工技术在核电维修领域的应用现状及发展[J].电焊机,2020,50(07):74-79+150.
WANG W,WANG Z M,WEI L F,et al. Application of underwater laser processing technology in nuclear power plant maintenance[J]. Electric Welding Machine,2020,50(07):74-79+150.
叶建雄, 彭星玲, 李兵. 水下湿法焊接研究进展[J]. 电焊机, 2020, 50(9):111-117.
YE J X, PENG X L, LI B. Research development of underwater wet welding[J]. Electric Welding Machine,2020, 50(9):111-117.
孙志强,陈忠兵,尹少华,等.激光焊技术在核电站水下部件维修的应用分析[J].焊接技术,2019,48(11):19-24.
SUN Z Q,CHEN Z B,YIN S H,et al. Application of Laser beam welding technology in underwater component maintenance of nuclear power plant[J]. Welding Technology,2019,48(11):19-24.
姚杞. 不锈钢水下激光焊接研究[D]. 天津:天津大学,2014.
YAO Q. Study on underwater laser welding of stainless steel[D].Tianjin:Tianjin University,2014.
施项中. TC4钛合金水下激光焊接工艺研究[D].黑龙江:哈尔滨工业大学,2018.
SHI X Z. Welding Procedure Research in Underwater Laser Welding of TC4 Titanium Alloy[D].Heilongjiang: Harbin Institute of Technology,2018.
孙清洁,李军兆,刘一搏.大型厚壁构件窄间隙激光焊接研究现状[J].电焊机,2020,50(07):9-17+147.
SUN Q J,LI J Z,LIU Y B. Research status of narrow gap laser welding for large thick-wall component[J]. Electric Welding Machine,2020,50(07):9-17+147.
张益文. 核电用钢超窄间隙激光填丝焊缺陷行为及接头组织与性能研究[D].上海:上海交通大学,2018.
ZHANG Y W. Defects Behavior and Microstructures and Properties of Nuclear Power Steel Welding Joints by Ultra-Narrow-Gap Laser Welding with Filler Wire[D].Shanghai: Shanghai JiaoTong University,2018.
Li J Z, Sun Q J, Kang K X, et al. Process stability and parameters optimization of narrow-gap laser vertical welding with hot wire for thick stainless steel in nuclear power plant[J]. Optics & Laser Technology, 2020, 123: 105921.
孙清洁,李军兆,刘一搏,等.电磁场辅助SUS316L不锈钢扫描激光窄间隙焊接接头成形及组织性能[J].中国激光,2020,47(10):73-82.
SUN Q J,LI J Z,LIU Y B,et al. Formation, Microstructure, and Properties of Electromagnetic Field-Assisted SUS316L Austenite Stainless Steel Laser Narrow-Gap Joint[J]. Chinese Journal of Lasers,2020,47(10):73-82.
编辑部网址:http://www.71dhj.comhttp://www.71dhj.com
相关作者
相关机构