奥贝体钢轨和珠光体钢轨气压焊接头界面行为及力学性能分析

谢航; 戴虹; 唐充

doi:10.7512/j.issn.1001-2303.2022.11.04

重点关注 | 浏览量 : 0 下载量: 14 CSCD: 0

PDF
导出
分享
收藏
专辑

奥贝体钢轨和珠光体钢轨气压焊接头界面行为及力学性能分析
Interface Behavior and Mechanical Properties of the Gas Pressure Welding Joints of Bainite Rail and Pearlite Rail
2022年52卷第11期页码：22-30
DOI： 10.7512/j.issn.1001-2303.2022.11.04

扫描看全文

谢航，戴虹，唐充.奥贝体钢轨和珠光体钢轨气压焊接头界面行为及力学性能分析［J］.电焊机，2022，52（11）：22-30.

XIE Hang, DAI Hong, TANG Chong.Interface Behavior and Mechanical Properties of the Gas Pressure Welding Joints of Bainite Rail and Pearlite Rail[J].Electric Welding Machine, 2022, 52(11): 22-30.
谢航，戴虹，唐充.奥贝体钢轨和珠光体钢轨气压焊接头界面行为及力学性能分析［J］.电焊机，2022，52（11）：22-30. DOI： 10.7512/j.issn.1001-2303.2022.11.04.

XIE Hang, DAI Hong, TANG Chong.Interface Behavior and Mechanical Properties of the Gas Pressure Welding Joints of Bainite Rail and Pearlite Rail[J].Electric Welding Machine, 2022, 52(11): 22-30. DOI： 10.7512/j.issn.1001-2303.2022.11.04.

摘要

采用气压焊对U26Mn奥贝体钢轨和U75V珠光体钢轨混焊进行研究，通过OM、SEM、冲击、拉伸、硬度试验探究异种钢轨气压焊接头焊缝界面的冶金结合特征与力学性能水平。结果表明：气压焊接头焊缝界面两侧存在元素扩散行为，焊缝界面金属在热机循环作用下发生了交互结晶和再结晶，冶金结合良好（除轨底脚外）；焊态接头平均强度达到贝氏体钢轨母材的86%，正火态接头平均强度达到贝氏体钢轨母材的90%；焊态接头轨顶面平均硬度、软化区平均硬度及宽度均满足TB/T1632《钢轨焊接》标准要求；接头中存在硫化物夹杂，对接头冲击韧性有较大影响。

Abstract

The mixed welding of U26Mn A-B rails and U75V pearlite rails is studied by gas pressure welding methods,and the metallurgical bonding characteristics and mechanical properties of the weld interface of the gas pressure welding joints of dissimilar rails are explored through OM, SEM, impact, tensile, and hardness tests. The results show that there is element diffusion behavior on both sides of the weld interface of the gas pressure welded joint.The metal at the weld interface has undergone mutual crystallization and recrystallization under the action of heat-mechanical cycles,and the metallurgical combination is good (except rail feet). The average strength of welded joints reaches 86% of the base material of bainite rail, and the average strength of normalized joints reaches 90% of the base material of bainite rail. The average hardness of the rail top surface and the softened zone, as well as the width of the softened zone of the welded joint meet the standard requirements of TB/T1632 "Rail Welding". The presence of sulfide in the joint has a great influence on the impact toughness of the joint.

关键词

贝氏体+珠光体钢轨气压焊元素扩散力学性能

Keywords

bainite + pearliterailgas pressure weldingelement diffusion behaviormechanical properties

references

李文亚，杨维宇，金自力. 国内外贝氏体钢轨综述［J］. 包钢科技，2013，39（6）：20-24.

LI W Y，YANG W Y，JIN Z L.Review of Bainitic Rails at Home and Abroad［J］. Science and Technology of Baotou Steel，2013，39（6）：20-24.

高古辉，桂晓露，谭谆礼，等. Mn-Si-Cr系无碳化物贝氏体/马氏体复相高强钢的研究进展［J］. 材料导报，2017，31（21）： 74-81.

GAO G H，GUI X L，TAN C L，et al. Carbide-free Bainite/Martensite Multiphase High Strength Steels：a Review［J］. Materials Review，2017，31（21）： 74-81.

郑浩.重载铁路用贝马复相钢轨焊接性研究［D］.四川：西南交通大学，2018.

ZHENG H. Reseach on Bainitie/Martensite Duplex-Phase Rail Steel Weldability of Heavy Haul Railways［D］.Sichuan： Southwest Jiaotong University，2018.

张琪，李力，丁韦，等.国内外贝氏体钢轨焊接研究现状［J］.热加工工艺，2017，46（03）：16-18.

ZHANG Q，LI L，DING W，et al. Research Status on Welding of Bainite Steel Rail in China and Other Countries［J］. Hot Working Technology，2017，46（3）：16-18.

Kozyrev N A，Usoltsev A A，Kryukov R E，et al. Modern Methods of Rail Welding［J］. Key Engineering Materials， 2017，253（1）：012002.

丁韦，李力，高振坤，等.贝氏体钢轨闪光焊接技术的研究［J］.铁道建筑，2019，59（12）：142-146.

DING W，LI L，GAO Z K，et al. Research on Bainite Rail Flash Butt Welding Technology［J］. Railway Engineering，2019，59（12）：142-146.

丁韦，李力，邹定强，等.贝氏体、珠光体钢轨闪光焊接头力学性能研究［J］. 热加工工艺，2016，45（23）：70-73.

DING W，LI L，ZOU D Q，et al. Study on Mechanical Properties of Flash Welding Joints of Bainite Steel and Pearlite Steel Rail［J］. Hot Working Technology，2016，45（23）：70-73.

石孟雷.贝氏体钢轨铝热焊接头焊后处理工艺的研究［D］.北京：中国铁道科学研究院，2020.

SHI M L.Research on Post-weld Treatment Process of Bainite Thermit Welding Joint［D］.Beijing：China Academy of Railway Sciences，2020.

赵智聪. 1380 MPa级贝氏体钢轨焊接性及焊接工艺研究［D］.北京：中国铁道科学研究院，2019.

ZHAO Z C.Study on weldability and welding technology of 1380MPa grade bainitic rail［D］. Beijing：China Academy of Railway Sciences，2019.

钟元.重载铁路用钢轨气压焊工艺研究［D］.四川：西南交通大学，2017.

ZHONG Y.Research on gas pressure welding process of heavy haul railways［D］. Sichuan： Southwest Jiaotong University，2017.

郑霄，戴虹.钢轨气压焊接头光斑缺陷研究［J］.材料导报，2021，35（14）：14142-14149.

ZHENG X，DAI H. Research on White Spot Defect of Rail Gas Pressure Welded Joint［J］. Materials Reports，2021，35（14）：14142-14149.

文章被引用时，请邮件提醒。

提交

暂无数据