扫 描 看 全 文
李玉光，付强，董元元，等.反应堆压力容器环形试件对焊接头力学不均匀性测试研究［J］.电焊机，2022，52（4）：64-70.
LI Yuguang, FU Qiang, DONG Yuanyuan, et al.Study on Mechanical Unevenness Measurement of Ring Component Butt Joint for Reactor Pressure Vessel[J].Electric Welding Machine, 2022, 52(4): 64-70.
为实现反应堆紧凑布置，反应堆压力容器内设计了多个复合功能的复杂环形构件，此类结构形式首次出现在反应堆压力容器设计中，属于大厚度、高拘束度焊缝结构形式，使得环形构件与反应堆压力容器内壁焊接接头残余应力呈现高幅值和分布复杂的特点；而此类结构长期在高温、高压、强辐照环境下服役并承受交变载荷作用，对结构安全性、可靠性等要求很高，因此有必要对反应堆压力容器内环形件与容器内壁大厚度焊接结构焊接残余应力的不均匀性进行仔细研究和分析，以便为反应堆压力容器环形试件对焊接头性能评估奠定技术基础。采用微冲剪和显微硬度方法测试了反应堆压力容器16MND5低合金钢环形试件对焊接头的力学分布规律。结果表明：对焊接头抗拉强度横向分布不均，呈M型，峰值强度出现在热影响区；对焊接头抗拉强度厚度方向分布不均，母材区波幅35 MPa、焊缝区波幅77 MPa、热影响区波幅80 MPa；对焊接头维氏硬度分布趋势与微冲剪测试结果一致，印证了微冲剪测试结果的合理性。
In order to realize the compact layout of the reactor, several complex annular components with composite functions are designed in the reactor pressure vessel. This structural form appears in the reactor pressure vessel design for the first time. It belongs to the structural type of large thickness and high restraint weld, which makes the residual stress of the welded joint between the annular component and the inner wall of the reactor pressure vessel show the characteristics of high amplitude and complex distribution. This kind of structure has been in service under high temperature, high pressure and strong irradiation environment for a long time and bears alternating load for a long time, which has high requirements for structural safety and reliability. Therefore, it is necessary to carefully study and analyze the non-uniformity of welding residual stress between the ring part in the reactor pressure vessel and the large thickness welded structure on the inner wall of the vessel, so as to lay a technical foundation for the performance evaluation of the welded joint of the ring specimen of the reactor pressure vessel. The mechanical distribution of butt welded joints of 16MND5 low alloy steel ring members of reactor pressure vessel is tested by micro punching shear and micro hardness methods. The results show that the transverse distribution of tensile strength of butt welded joints is uneven, showing an M-shaped distribution, and the peak strength appears in the heat affected area. The tensile strength of the welded joint is unevenly distributed in the thickness direction, and the wave amplitude in the base metal area is 35 MPa, the wave amplitude in the weld area is 77 MPa, and the wave amplitude in the heat affected area is 80 MPa. The distribution trend of Vickers hardness of welded joints is consistent with the test results of micro punching shear, which confirms the rationality of the test results of micro punching shear.
大厚度低合金钢对焊接头抗拉强度微冲剪试验力学不均匀性
large thickness low alloy steelbutt jointtensile strengthmicro punching shear methodmechanical heterogeneity
付强，罗英，刘兆东，等. 核电设备的焊接残余应力研究现状及调控措施［J］. 电焊机，2019，49（09）：49-54.
FU Qiang，LUO Ying，LIU Zhaodong， et al. Research Progress and Mitigation Method on Welding Residual Stress in Nuclear Power Equipment［J］. Electric Welding Machine， 2019， 49（09）：49-54.
黄廷尊，杨中娜，吴文烈，等. 超声冲击处理对大厚度高强钢对焊接头抗拉强度的影响［J］. 机械工程材料，2016，40（11）：106-110.
HUANG Tingzun， YANG Zhongna， WU Wenlie， et al. Effect of Ultrasonic Impact Treatment on Tensile Strength of Large Thickness High-Strength Steel Welded Joint［J］. Materials for Mechanical Engineering， 2016， 40（11）：106-110.
James M N. Residual stress influences on structural reliability［J］. Engineering Failure Analysis，2011，18（8）：1909-1920.
Withers P J. Residual stress and its role in failure［J］. Reports on progress in physics，2007，70（12）：2211-2264.
李永奎，陆善平，李殿中，等. 核反应堆关键焊接结构应力腐蚀裂纹失效评估［J］. 焊接学报，2013，34（9）：33-38．
LI Yongkui， LU Shanping， LI Dianzhong， et al. Life Prediction of Welded Joint in Core Shroud of BWR due to SCC Failure［J］. Transactions of the China Welding Institution， 2013， 34（9）：33-38．
瞿伟廉，何杰，陈波. 对接焊缝残余应力对疲劳裂纹扩展的影响［J］. 武汉理工大学学报，2009，31（2）：116-
QU Weilian， HE Jie， CHEN Bo. Influences of Welding Residual Stresses on Fatigue Crack Growth of Butt Weld Plate［J］. Journal of Wuhan University of Technology， 2009， 31（2）：116-119.
赵凌燕，薛河，方秀荣，等. 焊接力学不均匀性对316L焊缝扩展裂纹端部场的影响［J］.热加工工艺，2015， 44（09）：181-184.
ZHAO Lingyan， XUE He， FANG Xiurong， et al. Effect of Welded Mechanical Heterogeneity on Local Stress and Strain Ahead of Propagating Crack Tips in 316L Piping Welds［J］. Hot Working Technology， 2015，
44（09）：181-184.
张国栋，周昌玉. 焊接残余应力对焊接接头蠕变性能的影响［J］. 焊接学报，2007，28（8）：99-102，107.
ZHANG Guodong， ZHOU Changyu. Effects of Welding Residual Stress on Creep of Welded Joint［J］. Tran-sactions of the China Welding Institution， 2007， 28（8）：99-102，107.
徐彤，寿比南，关凯书，等. 小冲杆试验方法标准化研究（一）通用要求［J］. 压力容器，2007，27（7）：37-46.
关凯书，王志文，徐彤，等. 小冲杆试验方法标准化研究（二）材料室温拉伸性能的确定［J］. 压力容器，2007，27（8）：40-46.
GUAN Kaishu， Wang ZHiwen， XU Tong， et al. Study on Standardization of Small Punch Test（2） Tensile Properties at Room Temperature［J］. Pressure vessel Technology， 2007， 27（8）：40-46.
郭伟，牛靖，张建勋，等. 试样厚度对微冲剪试验结果的影响［J］. 焊接，2012（5）：31-34.
Guo Wei， Niu Jing， Zhang Jianxun， et al. Effect of Sample Thickness on Shear-punch Test Results ［J］. Welding & Joining， 2012（5）：31-34.
薛河， 侯鹏飞， 李富强，等. 残余应力与304奥氏体不锈钢表面硬度的关系［J］. 热加工工艺，2020，49（22）：44-47.
XUE He， HOU Pengfei， LI Fuqiang， et al. Relationship Between Residual Stress and Surface Hardness of 304 Austenitic Stainless Steel［J］. Hot Working Technology， 2020， 49（22）：44-47.
付强， 闵远胜， 李美福. 反应堆压力容器焊接残余应力试验及数值模拟研究［J］. 金属功能材料， 2022，29（01）：57-62.
FU Qiang ， MIN Yuansheng ， LI Meifu. Experiment Study and Numerical Simulation of Welding Residual Stresses for Reactor Pressure Vessel［J］. Metallic Functional Materials， 2022，29（01）：57-62.
杨立才， 邱天， 张亚斌， 等. 大型核电结构焊接残余应力高效数值计算［J］. 电焊机， 2019， 49（04）：91-101.
YANG Licai，QIU Tian，ZHANG Yabin， et al. Efficient Numerical Simulation for Analyzing the Welding Residual Stressin Large Nuclear Components［J］. Electric Welding Machine， 2019， 49（04）：91-101.
孙少南， 于敦吉， 张喆，等. 反应堆压力容器内环形件焊接残余应力数值模拟［C］. 压力容器先进技术—第九届全国压力容器学术会议论文集，2017：1088-1096.
Sun Shaonan， Yu Dunji， Zhang Zheet al. Finite Element Simulation on the Welding Residual Stress of Nuclear Reactor Pressure Vessel’s Inner Ring［C］. Advanced Pressure Vessel Technology - Proceedings of the 9th National Pressure Vessel Academic Conference， 2017：1088-1096.
Stewart G R， Elwazri A M， Varano R， et al. Shear punch testing of welded pipeline steel［J］. Materials Science And Engineering A， 2006， 420（1/2）：115-121.
Karthik V， Visweswaran P， Vijayraghavana， et al. Tensile-shear correlations obtained from shearpunch test technique using a modified experimental approach［J］. Journal of Nuclear Materials， 2009， 393（3）：425-432.
编辑部网址：http：//www.71dhj.comhttp://www.71dhj.com
相关作者
相关机构
公网安备11010802024621