05Cr17Ni4Cu4Nb与304L焊接的工艺方法与焊接材料的选用

王成伟

doi:10.7512/j.issn.1001-2303.2021.11.22

焊接工艺 | 浏览量 : 0 下载量: 72 CSCD: 0

PDF
导出
分享
收藏
专辑

05Cr17Ni4Cu4Nb与304L焊接的工艺方法与焊接材料的选用
Selection of welding process and material for 05Cr17Ni4Cu4Nb and 304L
2021年51卷第11期页码：118-121
DOI： 10.7512/j.issn.1001-2303.2021.11.22

扫描看全文

王成伟. 05Cr17Ni4Cu4Nb与304L焊接的工艺方法与焊接材料的选用[J]. 电焊机, 2021,51(11):118-121.

WANG Chengwei. Selection of welding process and material for 05Cr17Ni4Cu4Nb and 304L[J]. 2021,51(11):118-121.
王成伟. 05Cr17Ni4Cu4Nb与304L焊接的工艺方法与焊接材料的选用[J]. 电焊机, 2021,51(11):118-121. DOI： 10.7512/j.issn.1001-2303.2021.11.22.

WANG Chengwei. Selection of welding process and material for 05Cr17Ni4Cu4Nb and 304L[J]. 2021,51(11):118-121. DOI： 10.7512/j.issn.1001-2303.2021.11.22.

摘要

05Cr17Ni4Cu4Nb马氏体沉淀硬化不锈钢与304L奥氏体不锈钢材料的焊接是属于不锈钢材料分属不同金相组织的焊接工艺方法。针对马氏体组织的焊接特殊性,制定其使用的焊接工艺及焊接材料,并充分考虑马氏体组织的焊接裂纹倾向、焊接热输入量的控制、焊接接头的力学性能等方面因素。

Abstract

The welding of 05 Cr17 Ni4 Cu4 Nb martensitic precipitated hardened stainless steel and 304 L austenitic stainless steel belongs to dissimilar steel welding. For the welding particularity of martensitc structure, the welding process and materials are formulated, and the welding crack tendency of martensitc structure, the control of welding heat input, the mechanical properties of welded joints and other factors are fully considered.