基于经典力学试验的激光加工工程训练模式探索

高党寻; 姚启明; 彭世广; 王龙兵; 周冰科; 徐江波

doi:10.7512/j.issn.1001-2303.2021.06.20

焊接教学 | 浏览量 : 0 下载量: 57 CSCD: 0

PDF
导出
分享
收藏
专辑

基于经典力学试验的激光加工工程训练模式探索
Exploration of laser processing and engineering training mode based on classical mechanics experiment
2021年51卷第6期页码：104-106
DOI： 10.7512/j.issn.1001-2303.2021.06.20

扫描看全文

高党寻, 姚启明, 彭世广, 等. 基于经典力学试验的激光加工工程训练模式探索[J]. 电焊机, 2021,51(6):104-106.

GAO Dangxun, YAO Qiming, PENG Shiguang, et al. Exploration of laser processing and engineering training mode based on classical mechanics experiment[J]. 2021,51(6):104-106.
高党寻, 姚启明, 彭世广, 等. 基于经典力学试验的激光加工工程训练模式探索[J]. 电焊机, 2021,51(6):104-106. DOI： 10.7512/j.issn.1001-2303.2021.06.20.

GAO Dangxun, YAO Qiming, PENG Shiguang, et al. Exploration of laser processing and engineering training mode based on classical mechanics experiment[J]. 2021,51(6):104-106. DOI： 10.7512/j.issn.1001-2303.2021.06.20.

摘要

阐述在工程实践教学中针对激光加工开展的教学模式探索。实践中依托激光加工技术平台,开发突出实践性、设计性、研究性和创新性的工程实践教学方案,通过实践,训练学生的动手能力和实验分析能力,培养创新精神,进而提升实践教学效果。

Abstract

The exploration of the teaching mode of laser processing in engineering practice teaching is expounded.Relying on the platform of laser processing technology in practice,a practical,design,research and innovative teaching programs for engineering practice is developed,and through practice,students’ practical ability and experimental analysis ability are trained,and their innovative spirit is cultivated,so as to improve the effect of practical teaching.

关键词

激光加工实践教学拉伸试验工程能力

Keywords

laser processingpractice teachingtensile testengineering ability

references

文章被引用时，请邮件提醒。

提交

刀剪激光加工现状及发展趋势

基于项目制的焊接实践教学模式探究——以微型涡喷发动机燃烧室零部件制造为例