核电厂管道封闭式自熔焊的工艺研究

吕旭伟; 朱德才; 谭文良; 马力川; 康泽坛

doi:10.7512/j.issn.1001-2303.2020.08.14

焊接工艺 | 浏览量 : 0 下载量: 31 CSCD: 0

PDF
导出
分享
收藏
专辑

核电厂管道封闭式自熔焊的工艺研究
Study on proced ure of closed self-melting welding of pipelines in nuclear power plants
2020年50卷第8期页码：67-70
DOI： 10.7512/j.issn.1001-2303.2020.08.14

扫描看全文

吕旭伟, 朱德才, 谭文良, 等. 核电厂管道封闭式自熔焊的工艺研究[J]. 电焊机, 2020,50(8):67-70.

LV Xuwei, ZHU Decai, TAN Wenliang, et al. Study on proced ure of closed self-melting welding of pipelines in nuclear power plants[J]. 2020,50(8):67-70.
吕旭伟, 朱德才, 谭文良, 等. 核电厂管道封闭式自熔焊的工艺研究[J]. 电焊机, 2020,50(8):67-70. DOI： 10.7512/j.issn.1001-2303.2020.08.14.

LV Xuwei, ZHU Decai, TAN Wenliang, et al. Study on proced ure of closed self-melting welding of pipelines in nuclear power plants[J]. 2020,50(8):67-70. DOI： 10.7512/j.issn.1001-2303.2020.08.14.

摘要

针对我国在核电厂建设中壁厚小于等于3 mm小管的焊接现状,通过前期的市场调研、设备选型和工艺开发等过程,研究出一套用于现场薄壁小管焊接的成熟的封闭式自熔焊方法,可替代传统的手工焊接方法,有效地节约成本、保证焊接质量、提高施工效率,为核电厂小管自熔焊的推广应用提供参考和借鉴。

Abstract

A kind of welding procedure used for the closed self-melting welding of pipelines in nuclear power plants is introduced. Through the early market research,equ-ipment selection and procedure development,a set of mature closed self-melting welding method is developed for field welding of fine thin-walled pipe,which replaces the traditional manual welding method,saves cost effectively,ensures welding quality,improves construction efficiency,and provides refere-nce for the application of closed self-melting welding for fine pipelines in nuclear power plant.