提高10万m<sup>3</sup>油罐底板SAW焊接生产率的技术应用

茹成章; 秦红艳; 杨锁军; 徐进; 刘晓丽; 王国臣; 赫德明; 李士学

焊接工艺 | 浏览量 : 0 下载量: 19 CSCD: 0

导出
分享
收藏
专辑

提高10万m³油罐底板SAW焊接生产率的技术应用
Technology application in increasing SAW welding productivity for oil bottom plates of 100000 m³ tank
2018年48卷第6期页码：101-103
DOI：

扫描看全文

茹成章, 秦红艳, 杨锁军, 等. 提高10万m³油罐底板SAW焊接生产率的技术应用[J]. 电焊机, 2018,48(6):101-103.

RU Chengzhang, QIN Hongyan, YANG Suojun, et al. Technology application in increasing SAW welding productivity for oil bottom plates of 100000 m³ tank[J]. 2018,48(6):101-103.
茹成章, 秦红艳, 杨锁军, 等. 提高10万m³油罐底板SAW焊接生产率的技术应用[J]. 电焊机, 2018,48(6):101-103. DOI：

RU Chengzhang, QIN Hongyan, YANG Suojun, et al. Technology application in increasing SAW welding productivity for oil bottom plates of 100000 m³ tank[J]. 2018,48(6):101-103. DOI：

摘要

埋弧焊（SAW）是目前焊缝金属熔敷效率最高的焊接方法之一。埋弧焊接熔深大、生产率高、机械化操作程度高,因而适于中厚板结构的长焊缝焊接。在大型原油储罐建造过程中,储罐底板焊接量大、交叉作业多导致工期紧张,提高埋弧焊SAW焊接生产率非常必要。结合10万m,3,油罐施工,通过增加焊接线能量、窄间隙焊接、添加合金粉末等措施,有效提高了SAW焊接生产率,取得了良好效果。

Abstract

SAW is one way of welding with the high efficiency of metal deposited.SAW is applied in medium and thick steel plates welding with deep penetration,high productivity,and high degree of mechanization operation.It is necessary to improve the welding productivity with the consideration of many welding work for tank bottom plates at crude oil tank farm in limited working time.Combined with the construction of 100 000 m,3, tank,SAW welding productivity has been effectively improved by increasing the welding line energy,narrow gap welding,and adding alloy powders,resulting in good results.

关键词

埋弧焊储罐底板焊接生产率应用

Keywords

SAWoil tank bottom platesweld productivityapplication

references

文章被引用时，请邮件提醒。

提交

9Ni钢TIP-TIG焊接接头低温韧性研究

Q690抗震耐蚀钢埋弧焊熔敷金属性能研究

提高10万m3油罐底板SAW焊接生产率的技术应用

Technology application in increasing SAW welding productivity for oil bottom plates of 100000 m3 tank

DOI：

摘要

Abstract

关键词

Keywords

references

提高10万m³油罐底板SAW焊接生产率的技术应用

Technology application in increasing SAW welding productivity for oil bottom plates of 100000 m³ tank