SiC颗粒增强铝基复合材料连接研究进展

刘浩博; 杨尚磊; 谢超杰; 张琪; 曹亚明

焊接工艺 | 浏览量 : 0 下载量: 417 CSCD: 2

导出
分享
收藏
专辑

SiC颗粒增强铝基复合材料连接研究进展
Research development of joining of SiC particle reinforced Al-based composite
2018年48卷第1期页码：94-98
DOI：

扫描看全文

刘浩博, 杨尚磊, 谢超杰, 等. SiC颗粒增强铝基复合材料连接研究进展[J]. 电焊机, 2018,48(1):94-98.

LIU Haobo, YANG Shanglei, XIE Chaojie, et al. Research development of joining of SiC particle reinforced Al-based composite[J]. 2018,48(1):94-98.
刘浩博, 杨尚磊, 谢超杰, 等. SiC颗粒增强铝基复合材料连接研究进展[J]. 电焊机, 2018,48(1):94-98. DOI：

LIU Haobo, YANG Shanglei, XIE Chaojie, et al. Research development of joining of SiC particle reinforced Al-based composite[J]. 2018,48(1):94-98. DOI：

摘要

论述SiC颗粒增强铝基复合材料焊接的研究现状,分析熔化焊、电阻焊、高能束焊、搅拌摩擦焊、钎焊、瞬间液相连接在焊接SiC铝基复合材料中存在的问题以及相应的解决方案。铝基复合材料连接目前仍处于试验阶段,要进行工程应用在连接方法和机理方面需要进一步的研究。

Abstract

The research status of the jointing of Si C particle reinforced Al-based composites is reviewed. The problems and solutions of the welding of Si C Al-based composites by using fusion welding,electric resistance welding,high-energy beam welding,friction stir welding,brazing and transient liquid-phase bonding are analyzed. In general,Si C particle reinforced Al-based composite is still in the experimental stage now,and the joining method and mechanism need to be further studied for engineering application.

关键词

SiC颗粒增强铝基复合材料焊接方法研究现状

Keywords

Si C particle reinforced Al-based compositewelding technologyresearch status

references

文章被引用时，请邮件提醒。

提交

钽与不锈钢异种材料焊接的研究进展