我国核岛规范级机械设备耐蚀堆焊工艺评定标准比较与分析

郭城湘; 马迎兵

中国核电焊接技术 | 浏览量 : 0 下载量: 41 CSCD: 0

PDF
导出
分享
收藏
专辑

我国核岛规范级机械设备耐蚀堆焊工艺评定标准比较与分析
Comparison and analysis of criterions for corrosion resistant surfacing procedure qualification of mechanical components of PWR nuclear islands
2019年49卷第4期页码：307-312
DOI：

扫描看全文

郭城湘, 马迎兵. 我国核岛规范级机械设备耐蚀堆焊工艺评定标准比较与分析[J]. 电焊机, 2019,49(4):307-312.

GUO Chengxiang, MA Yingbing. Comparison and analysis of criterions for corrosion resistant surfacing procedure qualification of mechanical components of PWR nuclear islands[J]. 2019,49(4):307-312.
郭城湘, 马迎兵. 我国核岛规范级机械设备耐蚀堆焊工艺评定标准比较与分析[J]. 电焊机, 2019,49(4):307-312. DOI：

GUO Chengxiang, MA Yingbing. Comparison and analysis of criterions for corrosion resistant surfacing procedure qualification of mechanical components of PWR nuclear islands[J]. 2019,49(4):307-312. DOI：

摘要

介绍了我国核岛规范1、2、3级机械设备用焊接工艺评定存在的两份标准,对其中的耐蚀堆焊工艺评定要求从焊接变素和检验项目两个方面进行了比较与分析,找出差异,为今后解决差异创造条件,以争取最终获得融合统一的核岛机械设备焊接工艺评定标准。

Abstract

The situation of two Chinese criterions for welding procedure qualification on the class 1,2,3 components are introduced. By comparing and analyzing the welding procedure qualification for corrosion resistant surfacing from the aspects of welding parameters and examination,the differences are found,which provides some reference and guide to solve them and finally obtain the unified welding procedure qualification criterions for the future.

关键词

耐蚀堆焊焊接工艺评定差异

Keywords

corrosion resistant surfacingwelding procedure qualificationdifference

references

文章被引用时，请邮件提醒。

提交

国内外换热管与管板焊接工艺评定标准浅析