Effect of Electrode Materials on Nugget Deflection in Spot Welding of Non-equal Thickness Stainless Steel

ZHANG Yong; LI Zhiqiang; WANG Ting; MENG Qingshun

doi:10.7512/j.issn.1001-2303.2023.12.09

Welding Material | Views : 0 下载量: 4 CSCD: 0

PDF
Export
Share
Collection
Album

Effect of Electrode Materials on Nugget Deflection in Spot Welding of Non-equal Thickness Stainless Steel
Vol. 53, Issue 12, Pages: 58-62(2023)
DOI： 10.7512/j.issn.1001-2303.2023.12.09

扫描看全文

张勇，李志强，王亭，等.电极材料对非等厚不锈钢点焊熔核偏移的影响［J］.电焊机，2023，53（12）：58-62.

ZHANG Yong, LI Zhiqiang, WANG Ting, et al.Effect of Electrode Materials on Nugget Deflection in Spot Welding of Non-equal Thickness Stainless Steel[J].Electric Welding Machine, 2023, 53(12): 58-62.
张勇，李志强，王亭，等.电极材料对非等厚不锈钢点焊熔核偏移的影响［J］.电焊机，2023，53（12）：58-62. DOI： 10.7512/j.issn.1001-2303.2023.12.09.

ZHANG Yong, LI Zhiqiang, WANG Ting, et al.Effect of Electrode Materials on Nugget Deflection in Spot Welding of Non-equal Thickness Stainless Steel[J].Electric Welding Machine, 2023, 53(12): 58-62. DOI： 10.7512/j.issn.1001-2303.2023.12.09.

摘要

以不锈钢电阻点焊为例，分析了铬锆铜、铍铜、钨铜W80等材质电极对非等厚板电阻点焊熔核偏移的影响，通过制作形状完全相同的电极，在厚板侧采用铬锆铜电极，在薄板侧分别采用铬锆铜、铍铜、钨铜电极，在焊接参数一致的前提下焊接非等厚不锈钢，并对熔核尺寸和形貌进行对比分析。分析结果表明，在厚板侧采用铬锆铜电极，在薄板侧采用钨铜电极熔核偏移现象明显改善。

Abstract

Taking stainless steel resistance spot welding as an example, the influence of Cr-Zr-Cu electrode, Be-Cu electrode, W-Cu electrode on nugget offset of non-equal thickness plate resistance spot welding was analyzed. By making electrodes with the same shape, Cr-Zr-Cu electrode was used on the side of thick plate, and Cr-Zr-Cu, Be-Cu, W-Cu electrode was used on the side of thin plate. Under the premise of consistent welding parameters, nugget size and thickness and morphology was analyzed. The analysis results show that the phenomenon of nugget shift is obviously improved by using Cr-Zr-Cu electrode on the thick plate side and W-Cu electrode on the thin plate side.

关键词

轨道车辆电阻点焊熔核偏移电极材料

Keywords

rail vehicleresistance spot weldingnugget detectionelectrode materials

references

赵熹华，冯吉才.压焊方法及设备［M］. 北京：机械工业出版社，2005.

康丽齐，邵有发，魏良.电阻点焊在不锈钢轨道车辆上的应用研究［J］. 电焊机， 2018，48（03）：349-353.

KANG L Q，SHAO Y F，WEI L. Application study of spot welding equipment in stainless steel rail vehicles［J］. Electric Welding Machine，2018，48（03）：349-353.

刘庆祝，王洪潇，赵国新. 激光搭接焊工艺与电阻点焊工艺在轨道车辆不锈钢车体中的对比分析［J］. 电焊机， 2018，48（10）：44-47.

LIU Q Z，WANG H X，ZHAO G X. Laser lap welding and resistance spot welding process analysis on railway passenger cars［J］. Electric Welding Machine， 2018，48（10）：44-47.

刘波. 焊钳电极对骨架点焊质量的影响［J］. 焊接，2015（10）：56-59+71.

LIU B. Influence of welding torch electrode on spot welding quality of skeleton［J］. Welding & Joining，2015（10）：56-59+71.

王威，张永强，刘兴全，等. 镀锌汽车板点焊电极的优化技术［J］.电焊机， 2013，43（12）：68-72.

WANG W，ZHANG Y Q，LIU X Q，et al. Optimization techniques of spot-welding electrode applied to zinc coated steel used in auto［J］. Electric Welding Machine，2013，43（12）：68-72.

王大臣，刘晓琴，逯连文，等. 电阻点焊熔核检测标准对比及分析［J］. 电焊机， 2020， 50（6）：96-99.

WANG D C， LIU X Q， LU L W， et al. Comparison and analysis of nugget detection standards in resistance spot welding［J］. Electric Welding Machine， 2020， 50（6）：96-99.

颜福裕，李洋，罗震，等. 外加磁场对非等厚铝合金电阻点焊熔核偏移的影响［J］.焊接学报， 2016，37（02）：67-70+132.

YAN F Y，LI Y，LUO Z，et al. Effect of external magnetic field on nugget shift of aluminum alloy resistance spot weld with unequal thickness［J］.Transactions of the China Welding Institution，2016，37（02）：67-70+132.

李雪飞，陈志凯，刘超，等. 非等厚不锈钢电阻点焊工艺［J］.电焊机， 2016，42（6）：26-29.

LI X F，CHEN Z K，LIU C，et al. Study on the technology of resistance spot welding of non thick stainless steel［J］. Electric Welding Machine， 2016，42（6）：26-29.

毛镇东，阚盈，韩晓辉，等. 电极形状对异种不等厚铝合金电阻点焊接头形貌的影响［J］. 中国有色金属学报， 2021，31（2）：333-342.

MAO Z D，KAN Y，HAN X H，et al. Influence of electrode shape on resistance spot welding joint morphology of dissimilar unequal thickness aluminum alloys［J］. The Chinese Journal of Nonferrous Metals， 2021，31（2）：333-342.

邱然锋，李久勇，张振伟，等. 非等厚不锈钢板电阻点焊的熔核偏移［J］.河南科技大学学报（自然科学版），2017，38（06）：7-10.

QIU R F，LI J Y，ZHANG Z W，et al. Nugget Shifting in Resistance Spot Welding of Unequal Thickness Stainless Steel Sheet［J］. Journal of Henan University of Science And Technology：Natural Science，2017，38（06）：7-10.

编辑部网址：http：//www.71dhj.comhttp://www.71dhj.com

Alert me when the article has been cited

提交

Comparison and analysis of nugget detection standards in resistance spot welding

Study on the Influence of Electrode Type on the Weldability of TL091 Aluminum Alloy in Intermediate Frequency Spot Welding

Ultrasonic Online Monitoring of Resistance Spot Welding

Comparison and Analysis of Performance of Power Frequency and Intermediate Frequency Resistance Spot Welding Joints of CP780 Steel