Research on Simulation Verification of Alternating Current Field Measurement Testing of Thin-walled Austenitic Stainless Steel Welds in Nuclear Power Plant
- Vol. 53, Issue 12, Pages: 33-39(2023)
DOI: 10.7512/j.issn.1001-2303.2023.12.05
扫 描 看 全 文
扫 描 看 全 文
王宇欣,高宇,马迎兵,等.核工程薄壁不锈钢焊缝交流电磁场检测模拟验证[J].电焊机,2023,53(12):33-39.
WANG Yuxin, GAO Yu, MA Yingbing, et al.Research on Simulation Verification of Alternating Current Field Measurement Testing of Thin-walled Austenitic Stainless Steel Welds in Nuclear Power Plant[J].Electric Welding Machine, 2023, 53(12): 33-39.
针对薄壁(壁厚≤3.5 mm)奥氏体不锈钢焊缝缺陷检测需求,研发了一套包括探头和系统装备、方法、工艺的交流电磁场检测系统。设计了含不同类型、尺寸和位置缺陷的模拟试块,分别进行交流电磁场检测(ACFM)和射线检测(RT)盲测,并对比分析检测结果。验证试验结果表明:研发的ACFM检测系统和工艺稳定可靠,可实现薄壁不锈钢焊缝超标缺陷的快速有效筛查;ACFM效率是RT的3倍以上,对于预制的210处超标缺陷,RT检出169处,ACFM检出217处(含RT检出的169处),其中面积型缺陷均100%检出,误报率能满足工程需求;具有不低于RT的检出能力;ACFM技术对焊缝表面状态较敏感,适当打磨不影响缺陷检出。高灵敏度ACFM检测的研究和应用为薄壁非铁磁性材料焊缝内部缺陷检测提供了新思路。
China Nuclear Power Engineering Co., Ltd. led the research and development of a set of ACFM technology including probe, system equipment, methods and processes for the volume detection of thin-wall(≤3.5 mm) stainless steel welds in a national key engineering project.In this paper, a simulation test with different types, sizes and positions of defects was designed. ACFM and RT blind test were carried out respectively, and the test results were compared and analyzed. The verification test results show that the developed ACFM detection system and process are stable and effective, and can realize the rapid and effective detection of excessive defects in thin-wall stainless steel welds. For the super-standard defects in simulated test blocks, ACFM technology has no lower detection capability than RT. ACFM technology is sensitive to weld surface state, proper grinding does not affect the detection of defects.The research and application of high sensitivity ACFM detection provides a new idea for the detection of internal defects in welds of thin-walled non-ferromagnetic materials.
薄壁不锈钢焊缝交流电磁场检测射线检测模拟验证缺陷检出率
alternating current field measurementsimulation verificationthin-walled austenitic stainless steel welds
国家国防科技工业局. 核燃料后处理厂建(构)筑物、系统和部件的分级准则:EJ/T 939—2014[S]. 2014.
国家能源局. 承压设备无损检测 第3部分:超声检测: NB/T 47013.3—2015[S]. 2015.
Lewis A M, Michael D H, Lugg M C, et al. Thin-skin electromagnetic fields around surface-breaking cracks in metals[J]. J. Appl. Phys, 1998, 64:3777-3784.
Alan Raine, Martin Lugg. Alternating current field measurement inspection technique[J]. Sensor Review, 1999; 19(3):207-213.
中国机械工程学会无损检测学会. 无损检测概率[S]. 北京: 机械工程出版社, 1993.
朱明,谌晓华,张虎龙,等.面向核容器及管路的不锈钢内壁缺陷涡流检测工艺[J].电焊机,2022,52(7):34-38.
ZHU M, CHEN X H, ZHANG H L, et al.Eddy Current Testing Technology for Inner Wall Defects of StainlessSteel for Nuclear Vessel and Pipeline[J]. Electric Welding Machine, 2022, 52(7): 34-38.
孙小磊, 王雪臣, 孙钟, 等. 小管径、薄壁不锈钢焊缝的超声相控阵检测[J]. 电焊机, 2021,51(7):31-36.
SUN X L, WANG X C, SUN Z, et al. Ultrasonic phased array inspection on stainless steel weld of light wall thickness and diameter[J]. Electric Welding Machine,2021,51(7):31-36.
Noroozi A, Hasanzadeh, Reza P R, et al. A Fuzzy Learning Approach for Identification of Arbitrary Crack Profiles Using ACFM Technique[J]. IEEE Transactions on Magnetics, 2013, 49(9): 5016-5027.
李伟, 陈国明. 基于双U型激励的ACFM缺陷可视化技术研究[J]. 机械工程学报, 2009, 45(9): 233-237.
LI W,CHEN G M. Defect Visualization for Alternating Current Field Measurement Based on the Double U-shape Inducer Array[J]. Journal of Mechanical Engineering, 2009, 45(9): 233-237.
Li W, Yuan X A, Chen G M, et al. High Sensitivity Rotating Alternating Current Field Measurement for A rbitrary-angle Underwater Cracks[J]. NDT&E International, 2016, 79: 123-131.
编辑部网址:http://www.71dhj.comhttp://www.71dhj.com
相关文章
相关作者
相关机构