Research on Visual Technology for Quality and Performance Evaluation of Resistance Spot Welding Based on Ultrasonic Non-destructive Testing

WANG Hongxiao; WANG Chunsheng; DI Jiancai; YAN Zhanqi; LIU Liguo

doi:10.7512/j.issn.1001-2303.2023.10.09

Welding Equipment | Views : 0 下载量: 3 CSCD: 0

PDF
Export
Share
Collection
Album

Research on Visual Technology for Quality and Performance Evaluation of Resistance Spot Welding Based on Ultrasonic Non-destructive Testing
Vol. 53, Issue 10, Pages: 59-64(2023)
DOI： 10.7512/j.issn.1001-2303.2023.10.09

扫描看全文

王洪潇，王春生，邸建财，等.基于超声波无损检测的电阻点焊质量及性能评估可视化技术研究［J］.电焊机，2023，53（10）：59-64.

WANG Hongxiao, WANG Chunsheng, DI Jiancai, et al.Research on Visual Technology for Quality and Performance Evaluation of Resistance Spot Welding Based on Ultrasonic Non-destructive Testing[J].Electric Welding Machine, 2023, 53(10): 59-64.
王洪潇，王春生，邸建财，等.基于超声波无损检测的电阻点焊质量及性能评估可视化技术研究［J］.电焊机，2023，53（10）：59-64. DOI： 10.7512/j.issn.1001-2303.2023.10.09.

WANG Hongxiao, WANG Chunsheng, DI Jiancai, et al.Research on Visual Technology for Quality and Performance Evaluation of Resistance Spot Welding Based on Ultrasonic Non-destructive Testing[J].Electric Welding Machine, 2023, 53(10): 59-64. DOI： 10.7512/j.issn.1001-2303.2023.10.09.

摘要

电阻点焊接头的焊后检验作为保证焊接质量的一个重要环节，在地铁车辆不锈钢车体的焊装生产中一直备受重视。目前点焊接头质量的超声波检测技术大多为定性检测，无法确定熔核的几何状态、内部缺陷尺寸等质量信息。为此，开展了电阻点焊接头中超声波传播特性及其声场分布研究，研发了一种基于大直径、密集阵元探头的点焊接头内部连接状态快速超声成像及评估检测系统，通过对超声信号的深度处理技术研究，提取能够表现接头内部不同连接形态及缺陷的几何信息，建立定量化的检测模型，实现了不锈钢点焊接头内部连接状态的直观成像以及熔核尺寸的自动识别与计算。经超声波检测试验验证，熔核尺寸超声测量值和实测值吻合良好，其正态分布曲线均值为-0.001 87，标准差为0.139 2，相对误差均值和方差都很小。

Abstract

As an important link to ensure the welding quality, the post-welding inspection of resistance spot welding joints has been paid much attention in the welding production of stainless steel metro vehicle bodies. At present, the ultrasonic testing technology of spot welding joint quality is mostly qualitative testing, which can't determine the geometric state of nugget, the size of internal defects and other quality information. Therefore, the research on ultrasonic propagation characteristics and its sound field distribution in resistance spot welding joints is carried out, and developed a rapid ultrasonic imaging and evaluation detection system for the internal connection status of stainless steel spot welding joints based on large diameter and dense array element probes. By studying the deep processing technology of ultrasonic signals, we extract geometric information that can represent different connection forms and defects inside the joints, establish a quantitative detection model, and achieve intuitive imaging of the internal connection status of stainless steel spot welding joints and automatic recognition and calculation of nugget size. Through ultrasonic testing experiments, it has been verified that the measured and measured values of the nugget size are in good agreement. The mean of the normal distribution curve is -0.001 87, with a standard deviation of 0.139 2. The mean and variance of the relative error are both very small..

关键词

电阻点焊接头超声波检测直观成像熔核直径定量化检测

Keywords

resistance spot welding jointultrasonic testingvisual imagingnugget diameterquantitative testing

references

Ma Y， Wu P， Xuan C， et al. Review on techniques for online monitoring of resistance spot welding process ［J］. Advances in Materials Science ＆ Engineering，2013（4）： 1－6．

Schubert F， Hipp R， Gommlich A. Determination of diameter and thickness of weld nuggets in resistance spot weldingsby high frequency ultrasound inspection： proceedings of the11th european conference on non-destructive testing，prague， czech republic，october 6－10，2014［C］//Brno University of Technology， Brno， Czech Republic，2014 .

王春生，王洪潇，李英明，等.不锈钢电阻点焊在线超声检测信号特征研究［J］.电焊机，2021，51（9）：68-74.

WANG C S， WANG H X， LI Y M， et al. Research on Signal Characteristics of Online Ultrasonic Testing of Stainless Steel Resistance Spot Welding［J］. Electric Welding Machine， 2021， 51（9）：68-74.

朱晨宁. 基于动态电阻的不锈钢电阻点焊智能化质量评估研究［D］. 吉林：吉林大学，2022.

ZHU C N. Research on intelligent quality evaluation of stainless steel resistance spot welding based on dynamic resistance［D］. Jilin： Jilin University，2022.

姜中辉，王亭. 不锈钢车体电阻点焊超声波检测研究现状［J］. 机车车辆工艺，2017（1）： 10-12．

JIANG Z H，WANG T. Research Status of Resistance Spot Welding Ultrasonic Testing for Stainless Steel Vehicle Bodies［J］. Locomotive & Rolling Stock Technology，2017（1）： 10-12．

张龙，曾凯，何晓聪，等. 钛合金点焊接头的超声扫描及强度分析［J］. 材料导报，2016， 30（14）： 109-112．

ZHANG L，ZENG K，HE X C，et al. Ultrasonic Imaging and Strength Analyses of Spot Welds for Titanium Alloy［J］. Materials Review， 2016，30（14）： 109-112．

Regalado W J P. Ultrasonic real-time quality moni toring of aluminum spot weld process［D］. Canada ：University of Windsor， 2014．

刘静.不锈钢电阻点焊质量超声波定量及智能化检测研究［D］. 吉林：吉林大学， 2015 .

LIU J. Research on quantitative and intelligent ultrasonic detection for resistance spot welding of stainless steel［D］. Jilin： Jilin University，2015.

Zhou K， Cai L L. Online nugget diameter control system for resistance sopt welding［J］. Manuf acture Technology， 2013（68）：2571-2588.

中国机械工程学会焊接学会. 电阻焊理论与实践［M］. 北京：机械工业出版社， 1994.

Alert me when the article has been cited

提交

Failure Analysis of Fracture of High Strength Steel Spot-welded Joints about Cross Tension Testing