Research Progress of Brazing Connection of Nickel-based Superalloy GH4099
- Vol. 53, Issue 8, Pages: 122-130(2023)
DOI: 10.7512/j.issn.1001-2303.2023.08.16
扫 描 看 全 文
扫 描 看 全 文
宋昕怡,秦建,钟素娟,等.镍基高温合金GH4099钎焊连接研究现状[J].电焊机,2023,53(8):122-130.
SONG Xinyi, QIN Jian, ZHONG Sujuan, et al.Research Progress of Brazing Connection of Nickel-based Superalloy GH4099[J].Electric Welding Machine, 2023, 53(8): 122-130.
镍基高温合金是航空航天领域的重要材料,广泛应用于发动机涡轮叶片、燃烧室等部件,其连接结构是影响整体性能的关键部位。钎焊是制造镍基高温合金零部件最常用的连接工艺,在此介绍了镍基高温合金GH4099的钎焊连接现状,从常用钎料、钎焊接头界面和力学性能等方面展开阐述,并对GH4099合金的未来钎焊连接研究方向和发展趋势进行了展望。
Nickel-based superalloy is an important material in the aerospace field, which has been widely used in engine turbine blades, combustion chambers and other components. Its connection structure is the key part that affects the overall performance, and brazing is the most common connection process in the manufacturing of nickel-based superalloy parts. In this paper, the current situation of brazing of nickel-based superalloy GH4099 was introduced, from the aspects of common brazing filler metal, brazing joint interface and mechanical properties.The future research direction and development trend of brazing connection of GH4099 alloy were prospected.
镍基高温合金GH4099钎焊界面组织力学性能
nickel-based superalloyGH4099brazinginterfacial microstructuremechanical properties
高刚毅,周江波,韦家向.镍基高温合金GH4099的研究现状及发展趋势[J]. 特钢技术,2022,28(01):1-5.
GAO G Y,ZHOU J B,WEI J X. Research status and development trend of nickel base superalloy GH4099[J]. Special Steel Technology,2022,28(01):1-5.
刘彩云, 刘士伟, 孙元, 等. 高温合金熔化焊焊接性的研究进展[J]. 电焊机, 2021, 51(1):28-36.
LIU C Y, LIU S W, SUN Y, et al. Research progress of weldability of superalloys by fusion welding[J]. Electric Welding Machine, 2021, 51(1):28-36.
REN H S, XIONG H P, LONG W M, et al. Microstructures and mechanical properties of Ti3Al/Ni-based superalloy joints brazed with AuNi filler metal[J].Journal of Materials Science & Technology,2019,35(09):2070-2078.
JIANG C Y, LI X Q, WAN B, et al. Microstructure evolution and mechanical properties of TiAl/GH536 joints vacuum brazed with Ti-Zr-Cu-Ni filler metal[J]. Intermetallics,2022,142:107468.
DONG D, SHI K Q, ZHU D D, et al. Microstructure evolution and mechanical properties of high Nb-TiAl alloy/GH4169 joints brazed using CuTiZrNi amorphous filler alloy[J]. Intermetallics,2021,139:107351.
杭材.先进高温合金——制造先进发动机的基石[N].中国航空报,2012-12-13(T03).
许璠,宋国新,郑成斌,等.GH4099/GH3230异种高温合金焊接工艺性能研究[J]. 热加工工艺, 2019, 48(5):231-235.
XU F, SONG G X, ZHENG C B, et al. Study on Welding Performance of GH4099/GH3230 Dissimilar Superalloys[J].Hot Working Technology,2019,48(5):231-235.
SUN W J, WANG S L, TAN G H, et al. Microstructure and mechanical properties of Inconel713C Ni3Al-based superalloy joint welded by electron beam feeding wire welding technology[J]. Journal of Manufacturing Processes,2023,89:50-63.
陈冰清,熊华平,郭绍庆,等. NiCuNbCr焊料Ti3Al/GH4169合金氩弧焊接头的组织及性能[J]. 材料工程,2014(04):13-17+25.
CHEN B Q, XIONG H P, GUO S Q, et al. Microstructure and Mechanical Properties of Ti3A1/GH4169 Superalloy Joints Arc Welded with NiCuNbCr Filler Alloy[J].Journal of Materials Engineering,2014(04):13-17+25.
Bridges D, ZHANG S H, S Lang, et al. Laser brazing of a nickel-based superalloy using a Ni-Mn-Fe-Co-Cu high entropy alloy filler metal[J]. Materials Letters,2018,215:11-14.
DAI W H, SUN W J, XIN J J, et al. Weldability and mechanical properties of IC10 single crystal and GH3039 superalloy dissimilar laser beam welding joint[J]. Materials Science and Engineering A, 2020, 791:139797.
LI L, ZHAO W, FENG Z X, et al. Microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti-Zr-Cu-Ni-Fe-Co-Mo filler alloy[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(08):2143-2155.
REN H S, XING H P, LONG W M, et al. Interfacial diffusion reactions and mechanical properties of Ti3Al/Ni-based superalloy joints brazed with AgCuPd filler metal[J]. Materials Characterization, 2018, 144: 316-324.
REN H S, REN X Y, LONG W M, et al. Formation mechanism of interfacial microstructures and mechanical properties of Ti2AlNb/Ni-based superalloy joints brazed with NiCrFeSiB filler metal. Progress in Natural Science:Materials International,2021,31(2):310-318.
LI S, LIU Z M, XIA Y Q, et al. Vacuum brazing TiAl intermetallics to GH3030 alloy with a multi-component Ti-based filler metal[J]. Journal of Manufacturing Processes,2021,70:484-493.
陈刘攀,钟素娟,裴夤崟,等.硬质合金与高温合金钎焊界面组织与极端工况下的力学性能[J]. 电焊机, 2022, 52(11): 1-8.
LIU P, ZHONG S J, PEI Y Y, et al.Microstructure and Extreme Mechanical Properties of Brazing JointsBetween Cemented Carbide and Superalloy[J].Electric Welding Machine, 2022, 52(11): 1-8.
XIONG J T YUAN L, ZHU Y, et al. Diffusion bonding of nickel-based superalloy GH4099 with pure nickel interlayer[J]. Journal of Materials Science, 2019, 54(8):6552-6564.
王福.高强度高塑性的GH99板材的热处理工艺与性能研究[J].特钢技术,2019,25(03):3-4+62.
WANG F. Study on Heat Treatment Process and Properties of GH99 Plate with High Strength and High Plasticity[J].Special Steel Technology,2019,25(03):3-4+62.
张流锟. 热处理及合金元素对K4169镍基高温合金组织及性能的影响[D]. 重庆:重庆大学,2021.
ZHANG L K.Effect of heat treatment and alloy composition on microstructure and property of Ni-base superalloy K4169[D]. Chongqing: Chongqing University, 2021.
陈道凤. Ti、Nb、Co和Zr对高温合金25Cr37Ni0.6Nb组织和性能的影响[D]. 上海:上海交通大学,2014.
CHEN D F. Dissertation Submitted to Shanghai Jiao Tong University for the Degree of Master[D]. Shanghai: Shanghai Jiao Tong University, 2014.
王志平,肖慧玥,孙宇博.高温钎焊技术的研究现状与发展[J].兵器装备工程学报,2022,43(09):121-127.
WANG Z P, XIAO H Y, SUN Y B. Research progress in high temperature brazing technology[J]. Journal of Ordnance Equipment Engineering, 2022,43(09):121-127.
杨飞.B、Al和Ti对K325合金组织和性能的影响[D].安徽:中国科学技术大学,2021.
YANG F. Effect of B、Al and Ti on microstructure and properties of K325 alloy[D]. Anhui: University of Science and Technology of China, 2021.
张鹏,杨凯,朱强,等.微量元素对镍基高温合金微观组织与力学性能的影响[J].精密成形工程,2018,10(02):1-6.
ZHANG P, YANG K, ZHU Q, et al. Effect of Microelement on Microstructure and Mechanical Propertyof Nickel-base Superalloy[J].Journal of Netshape Forming Engineering, 2018,10(02):1-6.
郭建亭. 几种微量元素在高温合金中的作用与机理[J]. 中国有色金属学报,2011,21(03):465-475.
GUO J T. Effects of several minor elements on superalloys and their mechanism[J]. The Chinese Journal of Nonferrous Metals, 2011,21(03):465-475.
CAI J J, HU S P, LIU H B, et al. Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy[J]. Aerospace,2023, 10(1),73.
DONG H G, YANG J, XIA Y Q, et al. Effect of Cr content in Ni-based amorphous filler on microstructure and shear strength of K4169 nickel-based alloy brazed joint[J]. Journal of Materials Processing Technology. 2020,290:11695.
张冠星,龙伟民,潘建军,等.氧含量对银基粉状钎料润湿性及钎缝力学性能的影响[J].焊接学报, 2014, 35(3): 81-84.
ZHANG G X, LONG W M, PAN J J, et al.Effect of oxygen content on wettability and mechanical property of brazing seam for silver based powdered brazing fillermetal[J]. Transactions of the China Welding Institution, 2014, 35(3): 81-84.
张启运,庄鸿寿.钎焊手册[M].北京:机械工业出版社,2008.
LONG W M, LI S N, DONG D, et al.Morphological Evolution and Development Trend of Brazing Materials[J]. Rare Metal Materials and Engineering, 2019, 48(12): 3781-3790.
王娜,刘全明,龙伟民,等.钛基钎料制备、应用现状及发展趋势[J]. 热加工工艺, 2022,51(21):6-11.
WANG N, LIU Q M, LONG W M, et al.Preparation, Application Status and Development Trendof Titanium-based Brazing Filler Metals[J]. Hot Working Technology,2022,51(21):6-11.
李海新,魏红梅,何鹏,等.TiAl/Ti/Nb/GH99扩散连接接头的界面组织结构及接头强度[J]. 焊接学报,2012,33(09):9-12+113.
LI H X, WEI H M, HE P, et al. Interfacial microstructure and bonding strength of diffusionbonded TiAl/Ti/Nb/GH99 alloy joint[J]. Transactions of the China Welding Institution,2012,33(09):9-12+113.
LI H X, WEI H M, HE P, et al. Effects of alloying elements in GH99 superalloy on microstructure evolution of reactive brazing TiAl/GH99 joints[J]. Intermetallics,2013,34:69-74.
何鹏,李海新,林铁松,等.TiAl基合金与Ni基合金钎焊连接接头界面组织及性能[J]. 稀有金属材料与工程,2013,42(11):2248-2252.
HE P, LI H X, LIN T S, et al. Interfacial Microstructure and Properties of Brazing Joints of TiAl/Ni-Based Alloy[J]. Rare Metal Materials and Engineering,2013,42(11):2248-2252.
LI W Q, HU S P, LEI Y Z, et al. Interfacial microstructure and mechanical properties of GH99 superalloy and Nb brazed joint using Cu75Pt25 filler[J].Transactions of Nonferrous Metals Society of China,2020,30(10):2724-2736.
刘亚洲,宋晓国,程危危,等. 钎焊超薄GH99蜂窝夹层结构力学性能分析[J]. 焊接学报,2022,43(11):1-7+163.
LIU Y Z, SONG X G, CHENG W W, et al. Mechanical properties of brazed ultra-thin GH99 honey comb sandwich structure[J]. Transactions of the China Welding Institution, 2022,43(11):1-7+163.
叶晓凤,王宇,张恒泉,等.Al2O3陶瓷/AgCuTi/GH99高温合金的钎焊接头力学性能[J]. 稀有金属材料与工程,2018,47(11):3564-3570.
YE X F, WANG Y, ZHANG H Q, et al. Mechanical Properties of Alumina Ceramic/AgCuTi/GH99 Superalloy Brazed Joints[J]. Rare Metal Materials and Engineering,2018,47(11):3564-3570.
朱源,张昊,程晓瞳,等.镍箔中间层厚度对GH4099合金固相扩散焊质量的影响[J].焊接学报,2018,39(04):93-98+133.
ZHU Y, ZHANG H, CHENG X T, et al. Effect of nickel interlayer thickness on solid-state diffusion bonding quality of superalloy GH4099[J].Transactions of the China Welding Institution, 2018,39(04):93-98+133.
LIU D, SONG Y Y, SHI B, et al. Vacuum brazing of GH99 superalloy using graphene reinforced BNi-2 composite filler[J]. Journal of Materials Science & Technology,2018,34(10):1843-1850.
CHE H Y, ZHENG T M, WANG T J, et al.Wettability of GH4099 and MHC alloys by AgCuTi, TiZrCuTi and NiCrSiB filler metals and evaluation of diffusion-brazability[J]. Journal of Manufacturing Processes, 2021,64:1089-1097.
相关文章
相关作者
相关机构