Application of Ultrasonic Testing Technology in Non-groove Weld Detection of Bogie Laser Arc Hybrid Welding

Liping WANG; Meng TIAN; Kai LI; Quanzhi SONG; Yunxin CHEN; Jing BAI; Jianwei LV

doi:10.7512/j.issn.1001-2303.2022.08.15

Welding Technology | Views : 0 下载量: 8 CSCD: 0

PDF
Export
Share
Collection
Album

Application of Ultrasonic Testing Technology in Non-groove Weld Detection of Bogie Laser Arc Hybrid Welding
Vol. 52, Issue 8, Pages: 108-112(2022)
DOI： 10.7512/j.issn.1001-2303.2022.08.15

扫描看全文

王丽萍，田勐，李凯，等.超声波检测技术在转向架激光电弧复合焊无坡口焊缝检测中的应用［J］.电焊机，2022，52（8）：108-112.

WANG Liping, TIAN Meng, LI Kai, et al.Application of Ultrasonic Testing Technology in Non-groove Weld Detection of Bogie Laser Arc Hybrid Welding[J].Electric Welding Machine, 2022, 52(8): 108-112.
王丽萍，田勐，李凯，等.超声波检测技术在转向架激光电弧复合焊无坡口焊缝检测中的应用［J］.电焊机，2022，52（8）：108-112. DOI： 10.7512/j.issn.1001-2303.2022.08.15.

WANG Liping, TIAN Meng, LI Kai, et al.Application of Ultrasonic Testing Technology in Non-groove Weld Detection of Bogie Laser Arc Hybrid Welding[J].Electric Welding Machine, 2022, 52(8): 108-112. DOI： 10.7512/j.issn.1001-2303.2022.08.15.

摘要

在轨道客车转向架中厚板的焊接中，传统MAG焊存在热输入高、熔透性不佳、焊接变形大等不足，激光电弧复合焊熔透性好、焊接热输入小、变形易控制，在诸多领域实现了工程化应用，具有较好的应用前景。结合转向架侧梁激光电弧复合焊无坡口角焊缝的结构特点开发新工艺，解决了原检测方法无法对转向架侧梁激光电弧复合焊角焊缝全面扫查的工艺难点。超声波检测技术可以准确检测出这种焊缝内部各种缺陷，实现了该焊缝的全覆盖，为合理制定无损检测工艺提供了依据。

Abstract

Laser arc hybrid welding technology is one of the new welding technologies vigorously studied andpromoted by several major manufacturing plants of CRRC in recent years, especially for some shortcomings oftraditional MAG welding of medium and thick plates of railway car bogies. Laser arc hybrid welding has a goodapplication prospect. It has good penetration, small welding heat input and easy deformation control, and has beenapplied in many fields.Combined with the structural characteristics of the laser arc hybrid welding fillet weld ofthe side beam of the railway car bogie, a new process is developed, It solves the technical difficulty that theoriginal detection method cannot 才omprehensivescan the fillet weld of the bogie side beam by laser arc hybridwelding。Ultrasonic testing technology can accurately detect the internal defects of this kind of weld, and realizethe full coverage of the weld, which provides a basis for the rational formulation of nondestructive testingtechnology.

关键词

超声波激光电弧复合焊转向架角焊缝

Keywords

ultrasoniclaser arc hybrid weldingbogiefillet weld

references

张军明.轨道客车转向架用耐候钢激光电弧复合焊接头组织和性能研究［J］. 热加工工艺， 2016， 45（3）：237-239.

ZHANG Junming.Microstructure and Properties of Laser Arc Hybrid Welded Joints of Railway Vehicle Steering Frame Weathering Steel［J］.Hot Working Technology，2016，45（3）：237-239.

刘虎，宋其伟，王亚文.等. 激光电弧复合焊接用于27SiMn板材焊接的工艺研究［J］. 热喷涂技术，2017，9（2）：63-68.

LIU Hu，SONG Qiwei，WANG Yawen，et al.The Study on Process of Laser Arc Hybrid Welding to 27SiMn Plate［J］. Thermal Spray Technology， 2017， 9（2）：63-68.

李凯，何广忠，王春生.等. T型接头激光-MAG复合焊单面焊双面成型工艺［J］. 电焊机， 2018， 48（3）： 181-185.

LI Kai， HE Guangzhong， WANG Chunsheng，etal.T-joint laser-MAG hybrid welding by one side with back formation technology［J］. Electric Welding Machine，2018，48（3）：181-185.

桑劲鹏，万升云，章文显，等. 基于声场及声程的标准难点解析和应用研究［J］. 轨道交通装备与技术， 2019（1）：25-27.

SANG Jinpeng，WAN Shengyun，ZHANG Wenxian，etal.Difficulty analysis and applied research of the standards based on sound field and sonic path distance［J］. Rail Transportation Equipment and Technology， 2019（1）：25-27.

万升云. 超声波检测技术及应用［M］. 北京：机械工业出版社， 2017．

李凯，何广忠，王春生.等.接头组对间隙对激光电弧复合焊背部成形的影响［J］. 城市轨道交通研究， 2021（2）： 131-133，137.

LI Kai，HE Guangzhong，WANG Chunsheng，etal.Impact of Joint Gap on Back Weld Formation in Laser Arc Hybrid Welding［J］.Urban Mass Transit，2021（2）：131-133，137.

刘伟亮，何广忠，李凯.等. 厚壁横梁管激光-MAG电弧复合焊坡口形式及工艺窗口优化研究［J］. 电焊机，2021， 51（10）： 86-93.

LIU Weiliang，HE Guangzhong，LI Kai，etal.Study on gr oove type and process window optimization of laser-MAG arc hybrid welding of thick wall beam tube［J］.Electric Welding Machine， 2021， 51（10）： 86-93.

钱政平，章文显，葛佳棋.等. 无损检测缺欠试样的焊接制备方法研究及应用［J］. 金属加工， 2021（12）： 72-74.

QIAN Zhengping，ZHANG Wenxian，GE Jiaqi，etal.Research and application of welding preparation method for non-destructive testing defective samples［J］. MW Metal Forming， 2021（12）： 72-74.

宋传超. 影响钢结构焊缝超声波探伤结果的因素［J］.冶金与材料， 2021， 41（5）： 33-34，36.

SONG Chuanchao. Factors affecting ultrasonic testing results of steel structure welds［J］. Metallurgy and Materials， 2021， 41（5）： 33-34，36.

梁建英.高速列车智能诊断与故障预测技术研究［J］.北京交通大学学报，2019（1）： 63-70．

LIANG Jianying.Research on intelligent diagnosis and fault prediction technology for high speed trains［J］.Journal of Beijing Jiaotong University，2019（1）： 63-70．

Alert me when the article has been cited

提交

暂无数据