造渣剂组分对507Mo型药芯焊丝脱渣及飞溅性能的影响
Effect of Slagging Agent Components on Deslagging and Welding Spatter of 507Mo Flux Cored Wire
- 2023年53卷第11期 页码:119-123
收稿:2022-09-06,
修回:2023-05-21,
纸质出版:2023-11-25
DOI: 10.7512/j.issn.1001-2303.2023.11.19
移动端阅览

浏览全部资源
扫码关注微信
收稿:2022-09-06,
修回:2023-05-21,
纸质出版:2023-11-25
移动端阅览
通过改变药芯焊丝中金红石、镁砂、硅灰石、萤石等造渣剂的配比进行试验,研究造渣剂在药芯焊丝中的含量变化对507Mo型药芯焊丝脱渣率及飞溅率的影响。试验表明,在507Mo型药芯焊丝中,金红石含量不超过6%时,增加金红石含量能够改善焊丝的脱渣及飞溅性能;镁砂能提升药芯焊丝的全位置焊接性,使药芯焊丝能够进行横焊及立向上焊接,镁砂的加入量超过1.0%时焊丝的脱渣及飞溅开始变差;硅灰石能够改善焊丝的脱渣及飞溅性能,随着硅灰石的增加,熔渣在焊道表面覆盖更加均匀,但是过量的硅灰石会使焊道表面出现压铁水现象;萤石能够降低熔渣的熔点,改善熔渣的流动性,有利于熔渣在焊道表面的铺展及覆盖,萤石电离产生的F
-
和熔池中的H
+
结合生成HF气体,提高了熔滴的爆破力,使焊接飞溅率增加,萤石含量超过1.0%时会大幅增加焊丝飞溅率。
Through adjustment of the proportion of slagging agents such as rutile
magnesia
wollastonite and fluorite in the flux cored wire
the influence of slagging agent content in the flux cored wire on the deslagging efficiency and spatter rate of 507Mo flux cored wire was studied. The results indicate that when the content of rutile in 507Mo flux-cored wire is less than 6%
increasing the content of rutile can improve the deslagging and spatter performance of the wire. Magnesia can enhance the all-position weldability of flux-cored wire
thereby enabling the flux-cored wire to be welded horizontally and vertically. Once the magnesia content exceeds 1.0%
the deslagging and spattered efficiency of the welding wire commence to deteriorate. The wollastonite can augment the deslagging and spatter performance of the welding wire. With the increase of wollastonite
the slag covers the welding pass surface more evenly
however
excess wollastonite will precipitate the hot metal compaction phenomenon on the welding pass surface. Fluorite can reduce the melting temperature of molten slag
improve the fluidity of molten slag
and facilitate the spreading and covering of molten slag on the metallic surface. Fluorite ionization of F
-
and H
+
combined generation HF gas in the molten pool
increase the explosive force of molten drop
increase welding spatter rate. When the fluorite content exceeds 1.0%
the spattered rate of welding wire increases greatly.
GB/T 25776-2010 , 焊接材料焊接工艺性能评定方法 [S].
熊永家 , 杜学铭 , 宋昌宝 . 金红石对耐热钢焊条R307工艺性能的影响 [J]. 热加工工艺 , 2017 , 46 ( 01 ): 203 - 204 .
XIONG Y J , DU X M , SONG C B . Effect of rutile on welding properties of electrode R307 of heat resistant steel [J]. Hot Working Technology , 2017 , 46 ( 01 ): 203 - 204 .
孙咸 . 钛型气保护药芯焊丝焊接飞溅与气孔的关系 [J]. 电焊机 , 2015 , 45 ( 10 ): 11 - 16 .
SUN X . Relation between welding spatter and porosity of titanium type gas shielded flux cored wire [J]. Electric Welding Machine , 2015 , 45 ( 10 ): 11 - 16 .
王清宝 , 刘景凤 , 沈风刚 . 钛钙型自保护药芯焊丝工艺性能的研究 [J]. 焊接 , 2005 ( 04 ): 20 - 23 .
WANG Q B , LIU J F , SHEN F G . Study on processing property of self-shielded lime titania type of flux cored wire [J]. Welding & Joining , 2005 ( 04 ): 20 - 23 .
张平 , 汪虎 , 吴健 . MgO对碱性气保护药芯焊丝熔滴过渡行为的影响 [J]. 焊管 , 2008 ( 02 ): 27 - 30+94 .
ZHANG P , WANG H , WU J . Effects of MgO on droplet transfer formations of flux cored wire [J]. Welded pipe and Tube , 2008 ( 02 ): 27 - 30+94 .
栗卓新 , 陈邦固 , 雷万钧 . 药芯组成对碱性自保护药芯焊丝脱渣性影响的研究 [J]. 机械工程学报 , 2001 ( 10 ): 75 - 78+92 .
LI Z X , CHEN B G , LEI W J . Study on the effects of the flux-cored composition on the slag detachability of basic self-shielded flux-cored wire [J]. Materials for Mechanical Engineering , 2001 ( 10 ): 75 - 78+92 .
杨可 , 余圣甫 , 李延娜 . 自保护硬面药芯焊丝药芯成分对焊接飞溅的影响 [J]. 机械工程材料 , 2007 ( 06 ): 19 - 21+29 .
YANG K , YU S F , LI Y N . Effect of flux composition of self-shielded hardfacing flux-cored wire on Spatter [J]. Materials for Mechanical Engineering , 2007 ( 06 ): 19 - 21+29 .
栗卓新 , 蒋建敏 , 魏琪 . 熔渣成分对气保护不锈钢药芯焊丝脱渣性影响的研究 [J]. 材料工程 , 2003 ( 01 ): 30 - 33 .
LI Z X , JIANG J M , WEI Q . Study on effects of composition and microstructure of slag on the slag detach ability of gas-shielded flux cored wire for stainless steel [J]. Journal of Materials Engineering , 2003 ( 01 ): 30 - 33 .
陈伯蠡 . 焊接冶金原理 [M]. 北京 : 清华大学出版社 , 1991 : 100 - 110 .
朱厚国 , 许立宝 , 宋昌洪 . 几种组分对堆焊药芯焊丝用烧结焊剂工艺性能的影响 [J]. 焊接 , 2015 ( 10 ): 49 - 52+70 .
ZHU H G , XU L B , SONG C H . E ffects of several components on the technological properties of sintered flux for surfacing flux-cored wire [J]. Welding & Joining , 2015 ( 10 ): 49 - 52+70 .
Krivchikov S Y , Zhudra A P , Petrov V V . et al . Influence of fluorides on the welding-technological properties of self-shielded flux-cored wires [J]. Автоматиче ская Сварка , 1998 , 10 ( 7 ): 26 - 28 .
编辑部网址: http://www.71dhj.com http://www.71dhj.com
相关作者
相关机构
公网安备11010802024621