The new low energy welding technology is a new welding method and completes metal transfer by push-pull wire feed,there is no spatter during the welding process,and the heat input is reduced effectively. The current output and the wire movement match each other to achieve a stable welding. Through the welding procedure test,the influence of control parameters（such as arc peak current I,1,hold time T,1,wire feed rate v,1,the delay time of wire feed T,4,wire withdrawal rate v,2, and the delay time of wire withdrawal T,5,etc.）on the deposition rate of wire is studied. The results show that as the I,1,T,1,v,1,v,2, and T,5,increase the deposition rate of wire improves,and the effect of I,1, and T,1,on the deposition rate is outstanding,but the effect of v,2, and T,5, is not obvious,and with the increase of T,4,the deposition rate decreases,so that the deposition rate of wire can be controlled effectively by adjusting the welding parameters appropriately.