等离子-缆式MIG复合焊电弧特性模拟

司中祺; 张晓鸿; 赵娟妮

doi:10.7512/j.issn.1001-2303.2025.03.10

焊接工艺 | 浏览量 : 0 下载量: 5 CSCD: 0

PDF
导出
分享
收藏
专辑

等离子-缆式MIG复合焊电弧特性模拟
Simulation of Arc Characteristics in Plasma Cable-Wire MIG Composite Welding
2025年55卷第3期页码：77-81
收稿：2024-10-29，

修回：2024-12-02，

纸质出版：2025-03-20
DOI： 10.7512/j.issn.1001-2303.2025.03.10
稿件说明：

移动端阅览

司中祺，张晓鸿，赵娟妮.等离子-缆式MIG复合焊电弧特性模拟［J］.电焊机，2025，55（3）：77-81. DOI： 10.7512/j.issn.1001-2303.2025.03.10.

SI Zhongqi, ZHANG Xiaohong, ZHAO Juanni.Simulation of Arc Characteristics in Plasma Cable-Wire MIG Composite Welding[J].Electric Welding Machine, 2025, 55(3): 77-81. DOI： 10.7512/j.issn.1001-2303.2025.03.10.

摘要

基于磁流体动力学理论，建立了三维等离子（PAW）+缆式MIG复合焊接电弧数学物理模型，借助Fluent用户自定义函数编程，耦合求解了复合电弧的热场、流场和压力场，得到了PAW+缆式MIG复合焊接电弧热场和流场的特性规律。结果表明，PAW电弧和缆式MIG电弧相互倾斜吸引，耦合效果较好；复合电弧最高温度18 500 K，两电弧复合区域间温度保持在10 000 K以上，电弧高温区分布广，对工件有效加热半径大，尤其在中厚板打底层和中间填充层可有效减少焊接过程中因焊道填丝热量不足带来的未焊透和咬边等焊接缺陷，验证了PAW+缆式MIG复合电弧焊接加热范围广，熔化效率高的优点。同时，两电弧间形成了电弧压力约80 Pa的复合区域；且PAW+缆式MIG复合电弧的速度云图出现缆式MIG电弧被PAW电弧“吹偏压缩”的不连贯现象。

Abstract

Based on the theory of magnetohydrodynamics

a mathematical and physical model of the three-dimensional plasma-cable type welding wire MIG hybrid welding arc was established. With the help of Fluent user-defined function programming

the thermal field

flow field

and electromagnetic field of the composite arc were coupled and solved

and the characteristic laws of the thermal field and flow field of the plasma cable MIG composite welding arc were obtained. The results indicate that PAW arc and cable MIG arc are inclined and attracted to each other

and the coupling effect is good. The maximum temperature of the composite arc is 18500K

and the temperature in the two arc composite area is above 10000K. The high temperature zone is more widely distributed

and the effective heating radius of the workpiece is larger. This verifies the advantages of PAW+cable MIG composite arc welding

such as a wide heating range and high melting efficiency. At the same time

a composite area with an arc pressure of about 80Pa was formed between the two arcs; And the velocity cloud map of the PAW+cable MIG composite arc shows a discontinuous phenomenon where the cable MIG arc is blown and compressed by the PAW arc.

关键词

Keywords

references

Asai M S ， Ogawa M T ， Ishizaki M Y ， et al . Application of Plasma MIG Hybrid Welding to Dissimilar Joints Between Copper and Steel ［J］. Welding in the World ， Le Soudage Dans Le Monde， 2013 ， 56 （ 1-2 ）： 37 - 42 .

Yang T ， Gao H ， Zhang S ， et al . Interface behavior of copper and steel by plasma-MIG hybrid arc welding ［J］. Acta Metallurgica Sinica （English Letters）， 2013 ， 26 ： 328 - 332 .

孙彦文 . Q345B钢等离子-MAG复合焊工艺研究［D］. 四川：西南交通大学， 2015 .

SUN Y W . Research on hybrid plasma—mag welding progress of Q345B steel ［D］. Sichuan ： Southwest Jiaotong University ， 2015 .

郭阳阳，孙彦文，霍海龙，等 . Q345B钢等离子-MAG复合焊接头组织与力学性能［J］. 热加工工艺， 2016 ， 45 （ 11 ）： 215 - 217 .

GUO Y Y ， SUN Y W ， HUO H L ， et.al . Microstructure and mechanical properties of plasma-mag hybrid weld-ed joints for 0345B steel ［J］. Hot Working Technology ， 2016 ， 45 （ 11 ）： 215 - 217 .

孙家帅，张焱，零的应，等 . 送丝速度对5083铝合金等离子-MIG复合焊接头性能的影响［J］. 电焊机， 2021 ， 51 （ 10 ）： 143 - 147 .

SUN J S ， ZHANG Y ， LING D Y ， et.al . Effect of wire feeding speed on the properties of plasma MIG composite welded joints of 5083 aluminum alloy ［J］. Electric Welding Machine ， 2021 ， 51 （ 10 ）： 143 - 147 .

李翠红 . 双缆式十四丝GMAW焊接电弧的数值模拟研究［D］. 江苏：江苏科技大学， 2017 .

LI C H . The study of arc simulation on twin-cable 14-wire GMAW ［D］. Jiangsu ： Jiangsu University of Science and Technology ， 2017 .

吴浩 . 等离子—缆式七丝MIG复合焊接熔池流体行为研究［D］. 江苏：江苏科技大学， 2019 .

WU H . The study of molten pool fluid behavior on PAW-cable seven wire MIG composite welding ［D］. Jiangsu ： Jiangsu University of Science and Technology ， 2019 .

朱蔡琛 . 缆式焊丝气保焊电弧行为及熔滴过渡机理研究［D］. 江苏：江苏科技大学， 2017 .

ZHU C Ch . Study on arc behavior and droplet transfer mechanism of cable-type welding wire gas shielded welding ［D］. Jiangsu ： Jiangsu University of Science and Technology ， 2017 .

Janez Tušek . Mathematical modeling of melting rate in twin-wire welding ［J］. Journal of Materials Processing Technology ， 2000 ， 100 （ 1-3 ）： 250 - 256 .

Kiran D V ， Cheon J ， Arif N ， et al . Three-dimensional finite element modeling of pulsed AC gas metal arc welding process ［J］. International Journal of Advanced Manufacturing Technology ， 2016 ， 86 （ 5-8 ）： 1 - 22 .

Schnick M ， Wilhelm G ， Lohse M ， et al . Three dimensional modelling of arc behaviour and gas shield quality in tandem gas-metal arc welding using anti-phase pulse synchronization ［J］. Journal of Physics D Applied Physics ， 2011 ， 44 （ 18 ）： 185205 - 185215 .

杨涛 . Plasma-MIG电弧耦合机制及2219铝合金焊接工艺研究［D］. 黑龙江：哈尔滨工业大学， 2013 .

YANG T . Research on arc coupling mechanism and welding technology of plasma-mig hybrid arc welding process for 2219 aluminum alloy ［D］. Heilongjiang ： Harbin Institute of Technology ， 2013 .