Nb521铌合金电子束焊工艺研究

朱冬妹; 梁滨; 王斌; 胡晓勇; 王瑞; 沈华; 马建强

doi:10.7512/j.issn.1001-2303.2021.04.18

焊接工艺 | 浏览量 : 0 下载量: 519 CSCD: 1

PDF
导出
分享
收藏
专辑

Nb521铌合金电子束焊工艺研究
Study on electron beam welding technology of Nb521 niobium alloy
2021年51卷第4期页码：90-94
纸质出版：2021
DOI： 10.7512/j.issn.1001-2303.2021.04.18
稿件说明：

移动端阅览

朱冬妹, 梁滨, 王斌, 等. Nb521铌合金电子束焊工艺研究[J]. 电焊机, 2021,51(4):90-94. DOI： 10.7512/j.issn.1001-2303.2021.04.18.

ZHU Dongmei, LIANG Bin, WANG Bin, et al. Study on electron beam welding technology of Nb521 niobium alloy[J]. Eletric Welding Machine2021, 51(4): 90-94. DOI： 10.7512/j.issn.1001-2303.2021.04.18.

摘要

对Nb521铌合金进行了电子束焊工艺试验研究

优化了工艺参数

分析了焊缝表面成形及焊接接头组织、常温和高温力学性能。结果表明:Nb521具有良好的电子束焊接性能

焊缝常温拉伸强度、屈服强度均能达到母材的95%以上

延伸率达到母材的86.7%

在1 600℃以下焊缝性能良好。

Abstract

By the experimental study on electron beam welding（EBW） process of Niobium alloy Nb521

the welding parameters are optimized

and the appearance of weld surface and the microstructure of welded joint are analyzed. The results show that Nb521 alloy is well compatible with EBW. The tensile strength and yield strength of the weld can reach more than 95% of the base metal at normal temperature

and the elongation percentage of the weld reaches 86.7% of the base metal.The weld performance is good below 1 600 ℃.