K465镍基铸造高温合金钎焊及其在修复中的应用

李思思; 静永娟; 程耀永; 裴冲; 毛唯

doi:10.7512/j.issn.1001-2303.2020.11.07

焊接工艺 | 浏览量 : 0 下载量: 747 CSCD: 2

PDF
导出
分享
收藏
专辑

K465镍基铸造高温合金钎焊及其在修复中的应用
Brazing of casted K465 nickel-based superalloy and the related applications for repair
2020年50卷第11期页码：37-42
纸质出版：2020
DOI： 10.7512/j.issn.1001-2303.2020.11.07
稿件说明：

移动端阅览

李思思, 静永娟, 程耀永, 等. K465镍基铸造高温合金钎焊及其在修复中的应用[J]. 电焊机, 2020,50(11):37-42. DOI： 10.7512/j.issn.1001-2303.2020.11.07.

LI Sisi, JING Yongjuan, CHENG Yaoyong, et al. Brazing of casted K465 nickel-based superalloy and the related applications for repair[J]. Eletric Welding Machine2020, 50(11): 37-42. DOI： 10.7512/j.issn.1001-2303.2020.11.07.

摘要

介绍了目前4种K465镍基铸造高温合金钎焊技术及其在修复中的应用。对于常规钎焊间隙

采用Co45NiCrWB、BNi82CrSiB、BNi57NbCoWCrAlSiMo和BNi73CrSiB-40Ni钎料皆适合钎焊K465高温合金

其中Co45NiCrWB钎料的钎焊接头性能最好;采用真空电弧钎焊方法和B-Ni65CoCrWBMoAlNb钎料

可实现K465合金与耐磨合金B-2合金的连接

钎焊缝连续、致密、无裂纹等未焊合缺陷

叶片组织未见晶粒长大现象;采用FGH95镍基合金粉为预填高熔点粉末的方法可实现0.5 mm大间隙的K465合金钎焊;真空电子束钎焊作为一种高质量、高效率、精确控制的制造技术

对各种精密、复杂部件连接制造具有非常重要的意义。

Abstract

In this study

the brazing of casted K465 nickelbased superalloy with four different brazing methods and related brazing repair applications were introduced. For normal gap brazing

Co45NiCrWB

BNi82CrSiB

BNi57NbCoWCrAlSiMo and BNi73CrSiB-40Ni filler alloys were all suitable for the brazing of K465 superalloy

and the joint brazed with Co45NiCrWB filler alloy exhibited highest joint strength. The joining of K465 superalloy and B-2 wear-resistant alloy could be realized by vacuum arc brazing with B-Ni65CoCrWBMoAlNb filler alloy. Sound joints without cracks and coarse grains were obtained. Furthermore

the joining of K465 superalloy with the large brazing gap of 0.5 mm was studied by adding the mixed powders of FGH95 nickel-base alloy and brazing filler alloy. Additionally

due to its high quality

high efficiency and precise control characteristics

vacuum electron beam brazing technology could be widely applied in the joining of components with complex structures.