国产焊材在12Cr2Mo1R钢制重整反应器中的应用

付忠吉; 冯伟; 杨宏龙; 王岑; 杜金涛; 王子伟

doi:10.7512/j.issn.1001-2303.2020.10.24

焊接材料 | 浏览量 : 0 下载量: 1842 CSCD: 0

PDF
导出
分享
收藏
专辑

国产焊材在12Cr2Mo1R钢制重整反应器中的应用
Application of domestic welding materials in 12Cr2Mo1R steel reforming reactor
2020年50卷第10期页码：116-120
纸质出版：2020
DOI： 10.7512/j.issn.1001-2303.2020.10.24
稿件说明：

移动端阅览

付忠吉, 冯伟, 杨宏龙, 等. 国产焊材在12Cr2Mo1R钢制重整反应器中的应用[J]. 电焊机, 2020,50(10):116-120. DOI： 10.7512/j.issn.1001-2303.2020.10.24.

FU Zhongji, FENG Wei, YANG Honglong, et al. Application of domestic welding materials in 12Cr2Mo1R steel reforming reactor[J]. Eletric Welding Machine2020, 50(10): 116-120. DOI： 10.7512/j.issn.1001-2303.2020.10.24.

摘要

经过多年发展

我国重整反应器制造技术己日趋成熟

壳体钢材已实现国产化

但其壳体的焊接材料却未与壳体材料同步国产化

仍然主要依赖进口。文中采用哈焊所焊材对12Cr2Mo1R钢制重整反应器主壳体进行焊接

各项性能均能达到标准及重整反应器等设备设计要求

这表明国产焊材的质量和稳定性已达到国外同类产品水平

促进了该耐热钢焊材的国产化

同时采用国产焊材可大大降低制造成本。

Abstract

After years of development

China’s reforming reactor manufacturing technology has become increasingly mature

and the shell steel has been domestically produced

but the welding material of the shell is mainly imported and its localization does not synchronize with the localization of shell material. In this paper

the main shell of the 12Cr2Mo1R steel reforming reactor is welded with welding materials from Harbin Welding Research Institute. All performance can meet the national standards and equipment design requirements of the reforming reactor

which shows that the quality and stability of domestic welding materials reach the level of similar foreign products

and promotes the localization of heat-resistant steel welding materials

while using domestic welding materials can greatly reduce manufacturing costs.