超声相控阵技术在高速动车组转向架焊缝检测中的应用

王丽萍; 田勐; 蔡瑞明; 胡立国; 陈蕴新

doi:10.7512/j.issn.1001-2303.2020.03.15

焊接工艺 | 浏览量 : 0 下载量: 1202 CSCD: 0

PDF
导出
分享
收藏
专辑

超声相控阵技术在高速动车组转向架焊缝检测中的应用
Application of phased array ultrasonic technology in weld detection of high-speed bullet train bogie
2020年50卷第3期页码：80-85
纸质出版：2020
DOI： 10.7512/j.issn.1001-2303.2020.03.15
稿件说明：

移动端阅览

王丽萍, 田勐, 蔡瑞明, 等. 超声相控阵技术在高速动车组转向架焊缝检测中的应用[J]. 电焊机, 2020,50(3):80-85. DOI： 10.7512/j.issn.1001-2303.2020.03.15.

WANG Liping, TIAN Meng, CAI Ruiming, et al. Application of phased array ultrasonic technology in weld detection of high-speed bullet train bogie[J]. Eletric Welding Machine2020, 50(3): 80-85. DOI： 10.7512/j.issn.1001-2303.2020.03.15.

摘要

结合CRH3型系列高速动车组构架产品的结构特点

分析CRH3型系列高速动车组构架闸片托吊座关键焊缝内部检测工艺难点

通过实验验证了超声相控阵检测工艺方案

并对闸片托吊座设计结构改进提出合理性建议。对该焊缝进行相控阵超声波检测并在实际检测中得到验证

可以准确检测出该焊缝内部各种缺陷

研究了相控阵超声波技术在该类型焊缝检测方面的应用

实现了该焊缝检测的全覆盖

保证了焊缝质量。

Abstract

Combining the structural characteristics of the CRH3 series high-speed bullet train frame products

the difficulties in internal inspection technology for key weld of sluice bracket hanger of CRH3 series bullet train are analyzed.An ultrasonic phased array testing technology scheme is verified through experiments

and some reasonable suggestions are put forward for the improvement of the design structure of sluice bracket hanger. The phased array ultrasonic testing of the weld is carried out and verified in practical testing

and all kinds of defects in the weld can be detected accurately. The application of phased array ultrasonic technology in this weld inspection is studied

and the full coverage of this weld inspection is realized to guarantee the quality of weld.