Co-Cr-W活门组件焊接技术

李强; 陈小勇; 刘海汉; 杜娜; 董树勋

焊接工艺 | 浏览量 : 0 下载量: 41 CSCD: 0

导出
分享
收藏
专辑

Co-Cr-W活门组件焊接技术
Welding technology of Co-Cr-W valve assembly
2018年48卷第4期页码：81-84
纸质出版：2018
DOI：
稿件说明：

移动端阅览

李强, 陈小勇, 刘海汉, 等. Co-Cr-W活门组件焊接技术[J]. 电焊机, 2018,48(4):81-84. DOI：

LI Qiang, CHEN Xiaoyong, LIU Haihan, et al. Welding technology of Co-Cr-W valve assembly[J]. Eletric Welding Machine2018, 48(4): 81-84. DOI：

摘要

采用金基钎料BAu70NiPd1005/1045的工艺针对活门组件进行试验研究

采用模拟试验件进行工艺摸索试验

经过参数调整、细致装配、工装改进等

最终摸索出一套Co-Cr-W与高温合金GH4169的焊接工艺方案

成功解决了活门组件采用金基钎料的真空钎焊技术难题

并且满足生产加工及焊接质量要求

目前该方案已应用于实际生产。

Abstract

This paper mainly focuses on the research and test of the process of using the gold base filler metal BAu70NiPd1005/1045 for the valve assembly. The simulation test parts are mainly used for the process groping test. After the adjustment of the parameters

the detailed assembly

the improvement of the tooling and so on

a set of welding process scheme for the Co-Cr-W and the superalloy GH4169 is finally developed. The problem of vacuum brazing technology for valve assembly using gold based solder has been successfully solved. At present

this scheme has been applied in actual production and guided production.