轨道车辆用铝合金型材焊接错边形成原因分析

姚肖洁; 朱宝利; 刘志森; 吴振华; 尹德猛

高速列车金属材料及焊接先进技术 | 浏览量 : 0 下载量: 49 CSCD: 0

导出
分享
收藏
专辑

轨道车辆用铝合金型材焊接错边形成原因分析
Analysis on the cause of linear misalignment in the welding process of aluminum alloy profiles for railway vehicles
2018年48卷第3期页码：363-366
纸质出版：2018
DOI：
稿件说明：

移动端阅览

姚肖洁, 朱宝利, 刘志森, 等. 轨道车辆用铝合金型材焊接错边形成原因分析[J]. 电焊机, 2018,48(3):363-366. DOI：

YAO Xiaojie, ZHU Baoli, LIU Zhisen, et al. Analysis on the cause of linear misalignment in the welding process of aluminum alloy profiles for railway vehicles[J]. Eletric Welding Machine2018, 48(3): 363-366. DOI：

摘要

以某轨道车辆项目某型材组焊件为例进行焊接生产试验并测量和总结

从型材尺寸精度、焊前装配质量、定位焊强度和型材断面结构设计等方面进行系统的讨论

分析并概括这些因素对型材焊后错边的影响

确定导致铝合金型材焊后错边的主要因素是型材的断面结构设计不合理。最后提出几种铝合金轨道车辆型材焊接时适合采用的型材断面结构

采用此类型材断面结构进行焊接

可以有效地避免焊后错边的产生

提高工件的整体质量和生产效率。

Abstract

The welding test was conducted or carried out on one profile component of one railway vehicle

and the results were measured and analyzed. The effect of size precision

the quality of assembling

the strength of tack welding and the profile section on the linear misalignment in the process of welding of aluminum alloy profiles for railway vehicles were synthetically discussed

at the same time

the reasonable profile section was proposed

which can effectively avoid the generation probability of linear misalignment and improve the welding quality and the production efficiency.