6005A-T6铝合金型材搅拌摩擦焊工艺参数优化

郁志凯; 刘春宁; 钮旭晶; 范东宇

高速列车金属材料及焊接先进技术 | 浏览量 : 0 下载量: 170 CSCD: 5

导出
分享
收藏
专辑

6005A-T6铝合金型材搅拌摩擦焊工艺参数优化
Optimization of friction stir welding process for 6005A-T6 Al alloy extrusions
2018年48卷第3期页码：191-194
纸质出版：2018
DOI：
稿件说明：

移动端阅览

郁志凯, 刘春宁, 钮旭晶, 等. 6005A-T6铝合金型材搅拌摩擦焊工艺参数优化[J]. 电焊机, 2018,48(3):191-194. DOI：

YU Zhikai, LIU Chunning, NIU Xujing, et al. Optimization of friction stir welding process for 6005A-T6 Al alloy extrusions[J]. Eletric Welding Machine2018, 48(3): 191-194. DOI：

摘要

针对某型号地铁侧墙板6005A-T6铝合金型材搅拌摩擦焊进行焊接工艺参数优化。根据前期试验拟定搅拌头转速为1 000

100 r/min、焊接速度为500

200 mm/min

通过对比焊缝外观成形质量

确定搅拌头旋转速度为1 500 r/min和焊接速度为1 100 mm/min。对不同顶锻力获得的接头进行金相检验和拉伸弯曲试验。当工艺参数为ω=1 500 r/min、v=1 100 mm/min、F=13.5 k N时

接头无缺陷

抗拉强度可达母材的80%

180°弯曲试验无断裂。

Abstract

In this paper

the welding parameters in friction stir welding of 6005 A-T6 Al alloy extrusions used in side wall of metro train were optimized. Based on the welding parameter window with rotational speed of 1000-2100 r/min for and welding speed of500

200 mm/min obtained in preliminary experiments

a spindle speed of 1 500 r/min and welding speed of 1 100 mm/min were determined as the optimal parameters via comparing the appearing quality of welding seam. Metallographic analysis and tensile and bending tests were performed for joints welded with different axial forces. With a spindle speed of 1 500 r/min

welding speed of 1 100 mm/min and axial force of 13.5 k N

defect free joints could be obtained

while the tensile strength reached 80% of base metal and no fracture occurred in 180° bending tests.