S355J2W+N钢焊接接头返修焊金相组织分析

宫平; 常力

高速列车金属材料及焊接先进技术 | 浏览量 : 0 下载量: 69 CSCD: 3

导出
分享
收藏
专辑

S355J2W+N钢焊接接头返修焊金相组织分析
Analysis of microstructure in S355J2W+N steel welded joint by repair welding
2018年48卷第3期页码：134-138
纸质出版：2018
DOI：
稿件说明：

移动端阅览

宫平, 常力. S355J2W+N钢焊接接头返修焊金相组织分析[J]. 电焊机, 2018,48(3):134-138. DOI：

GONG Ping, CHANG Li. Analysis of microstructure in S355J2W+N steel welded joint by repair welding[J]. Eletric Welding Machine2018, 48(3): 134-138. DOI：

摘要

研究S355J2W+N钢焊接接头返修焊的金相组织

分析不同返修次数的焊缝区和热影响区组织特征。结果表明

返修焊对焊缝表层和底层的金相组织无明显影响。随着返修次数的增加

焊缝金属中的珠光体组织逐渐变细

铁素体晶粒有所长大。返修焊次数一定时

沿接头厚度方向由上到下HAZ粗晶区中针状铁素体呈减少趋势

HAZ不完全正火区晶粒大小不均

组织保留了母材的轧制态特征。

Abstract

Studies the S355 J2 W+N microstructure in S355 J2 W+N welded joint by repair welding

analyzes the characteristics of weld zone and heat affected zone through different times of repair welding. The results show that the microstructure of upper layer and the bottom are not influenced apparently by repair welding. As the increase of the times of repair welding pearlite in the weld metal tapers

ferrite grain grows up. When welded by the same times

from top to bottom along the thickness of the joint direction

HAZ acicular ferrite in the coarse grain zone has a tendency to reduce

HAZ incomplete uneven grain size are normalized area

the organization has kept rolling state characteristics of the parent metal.