纳秒脉冲激光清除铝合金膜层的应用研究

倪加明; 徐爱杰; 陈波; 杨斯达; 王春明; 杨学勤

重点关注 | 浏览量 : 0 下载量: 587 CSCD: 1

PDF
导出
分享
收藏
专辑

纳秒脉冲激光清除铝合金膜层的应用研究
Application study on nanosecond pulse laser cleaning aluminum anodic oxide film
2019年49卷第11期页码：26-29
纸质出版：2019
DOI：
稿件说明：

移动端阅览

倪加明, 徐爱杰, 陈波, 等. 纳秒脉冲激光清除铝合金膜层的应用研究[J]. 电焊机, 2019,49(11):26-29. DOI：

NI Jiaming, XU Aijie, CHEN Bo, et al. Application study on nanosecond pulse laser cleaning aluminum anodic oxide film[J]. Eletric Welding Machine2019, 49(11): 26-29. DOI：

摘要

利用一种新型纳秒高能脉冲光纤激光

开展航天铝结构件阳极氧化膜局部精准清除技术研究

并采用SEM和EDS对金属新生表面进行成分表征。结果表明

采用高峰值功率纳秒脉冲光纤激光清除后

新生金属表面成分为99%Al

实现了铝合金阳极氧化膜层高效、彻底的破碎剥离式清除。大型铝合金贮箱结构件采用该种激光清除焊接边

其焊缝质量优良。

Abstract

The aluminum anodic oxide film is cleaned by using a nanosecond pulse laser. Both SEM and EDS are used for element component analysis. The results show that the newly born metal surface is composed of 99 wt.% Al element. The aluminum anodic oxide film is completely peeled under laser heating crack mechanism. The weld quality of propellant tank using laser cleaning technology reaches the highest level.