某12Cr1MoVG水冷壁管对接焊缝热裂纹成因分析及预防

肖东平; 华金良; 高淼淼; 银润邦; 谢逍原

焊接工艺 | 浏览量 : 0 下载量: 1121 CSCD: 1

PDF
导出
分享
收藏
专辑

某12Cr1MoVG水冷壁管对接焊缝热裂纹成因分析及预防
Reason analysis and prevention measures on hot crack in butt weld of 12Cr1MoVG water wall tubes
2019年49卷第10期页码：92-96
纸质出版：2019
DOI：
稿件说明：

移动端阅览

肖东平, 华金良, 高淼淼, 等. 某12Cr1MoVG水冷壁管对接焊缝热裂纹成因分析及预防[J]. 电焊机, 2019,49(10):92-96. DOI：

XIAO Dongping, HUA Jinliang, GAO Miaomiao, et al. Reason analysis and prevention measures on hot crack in butt weld of 12Cr1MoVG water wall tubes[J]. Eletric Welding Machine2019, 49(10): 92-96. DOI：

摘要

某12Cr1MoVG水冷壁部件在管屏对接焊后射线拍片时发现

部分对接焊缝存在横向缺陷显示。通过对缺陷样管进行化学成分、金相组织、断口和能谱分析

确定了缺陷性质为焊接热裂纹

产生于熔池金属凝固结晶过程。结合对相关焊接工艺和实际操作的调查

找出缺陷产生原因

并提出了预防措施。

Abstract

The transverse cracks were found in part of the butt welds of 12Cr1MoVG water wall panels after X ray inspection. By means of chemical composition analysis

microstructure examination

fracture and energy spectrum analysis

the nature of crack was identified as welding hot crack

which produced in the weld joint solidification. Combining with the investigation of relevant welding process and the actual operation

the causes of crack was found out and the prevention measures were put forward.