SAF2507超级双相不锈钢焊接热影响区冷却过程组织及性能研究

安小东; 王新; 孙永涛; 谷孝满; 刘洁

金属材料焊接工艺性及焊材 | 浏览量 : 0 下载量: 985 CSCD: 1

PDF
导出
分享
收藏
专辑

SAF2507超级双相不锈钢焊接热影响区冷却过程组织及性能研究
Microstructure and performance research of SAF2507 super duplex stainless steel welding heat affected zone cooling process
2019年49卷第9期页码：19-23
纸质出版：2019
DOI：
稿件说明：

移动端阅览

安小东, 王新, 孙永涛, 等. SAF2507超级双相不锈钢焊接热影响区冷却过程组织及性能研究[J]. 电焊机, 2019,49(9):19-23. DOI：

AN Xiaodong, WANG Xin, SUN Yongtao, et al. Microstructure and performance research of SAF2507 super duplex stainless steel welding heat affected zone cooling process[J]. Eletric Welding Machine2019, 49(9): 19-23. DOI：

摘要

采用GLEEBLE3800试验机进行焊接热模拟实验

研究了冷却时间t

12/8

对SAF2507钢模拟焊接热影响区（HAZ）微观组织转变的影响规律。结果表明:随着冷却时间t

12/8

的增加

铁素体晶内及晶界处析出了二次奥氏体和魏氏体状奥氏体

初始奥氏体组织由长条状逐渐转变成粗大的树枝状或羽毛状

最终相互交集在一起形成网状结构;当t

12/8

增加至69 s时

在α/γ相界和α/α晶界处发现有χ相析出。

Abstract

In this paper

the effect of the cooling time t

12/8

on microstructural transformation of the SAF2507 heat affected zone（HAZ）

which was simulated by GLEEBLE3800 thermal simulation machine was studied. The results indicated that secondary austenite and Widmanstatten austenite made the precipitation increased in the ferrite grain and grain boundary with the increase of cooling time t

12/8

Meanwhile

the banded austenite gradually grew up and transformed into dendritic or plume

eventually form a net structure with the increase of cooling time of t

12/8

. When the cooling time of t

12/8

added to 69 seconds

the intermetallic phase which was χ phase precipitated at the boundary between α/γ and α/α.