管板一次侧堆焊焊后消氢感应加热温度场的数值模拟

李向国; 何锡鑫; 杨杰; 唐洪磊; 赵朋成; 李滨; 于超

焊接设备 | 浏览量 : 0 下载量: 775 CSCD: 2

PDF
导出
分享
收藏
专辑

管板一次侧堆焊焊后消氢感应加热温度场的数值模拟
Numerical simulation of dehydrogenation induction heating temperature field of the surfacing of tube-sheet on its primary side
2019年49卷第8期页码：29-35
纸质出版：2019
DOI：
稿件说明：

移动端阅览

李向国, 何锡鑫, 杨杰, 等. 管板一次侧堆焊焊后消氢感应加热温度场的数值模拟[J]. 电焊机, 2019,49(8):29-35. DOI：

LI Xiangguo, HE Xixin, YANG Jie, et al. Numerical simulation of dehydrogenation induction heating temperature field of the surfacing of tube-sheet on its primary side[J]. Eletric Welding Machine2019, 49(8): 29-35. DOI：

摘要

运用有限元方法对核电蒸发器管板一次侧堆焊的焊后消氢感应加热工艺进行数值分析。设计了适合管板感应加热的感应器结构

基于ANSYS的APDL程序建立管板感应加热的电磁-热耦合模型

分析感应加热过程的感应线圈结构和参数对温度场分布的影响。结果表明

在合适的参数下

侧面和底面同时安置感应线圈能极大提高加热效率并改善整体加热效果。采用优选感应加热参数进行相关实验

数值模拟得到的温度与实验结果基本一致。

Abstract

In this paper

the finite element method（FEM）is used to analyze the post-weld dehydrogenation induction heating process for the surfacing of tube sheet on its primary side of a nuclear power evaporator. The inductor structure suitable for induction heating of tubesheet was designed. The electromagnetic-thermal coupling model of tube-sheet induction heating was established based on the ADSL program in ANSYS. The influences of the structure and parameters of induction coil on the temperature distribution during induction heating were studied. The results showed that under the suitable parameters

the installation of induction coils on both sides and bottom could greatly improve the overall heating effect and heating efficiency. Experiments of the optimal parameters were carried out and the simulated temperature distribution was agreed with the experimental results.