大口径、厚壁SA-312TP316H管焊接工艺试验研究

王冬平; 张玮; 莫春鸿

焊接工艺 | 浏览量 : 0 下载量: 539 CSCD: 1

PDF
导出
分享
收藏
专辑

大口径、厚壁SA-312TP316H管焊接工艺试验研究
Study on welding test of SA-312TP316H pipe with heavy-gauge and thick-wall
2019年49卷第7期页码：101-105
纸质出版：2019
DOI：
稿件说明：

移动端阅览

王冬平, 张玮, 莫春鸿. 大口径、厚壁SA-312TP316H管焊接工艺试验研究[J]. 电焊机, 2019,49(7):101-105. DOI：

WANG Dongping, ZHANG Wei, MO Chunhong. Study on welding test of SA-312TP316H pipe with heavy-gauge and thick-wall[J]. Eletric Welding Machine2019, 49(7): 101-105. DOI：

摘要

对锅炉用大口径、厚壁TP316H管的焊接性

焊接材料δ铁素体控制以及焊后热处理参数的选择进行分析

并对接头性能进行了试验研究。结果表明

采用δ铁素体数FN控制在5～10的配套焊材

总体焊接性良好

焊缝质量可控

接头各项力学性能满足标准要求

能够满足工程应用的要求。

Abstract

In this paper

the welding performance

the control of welding material δ ferrite and the selection of post-weld heat treatment parameters of SA-312TP316H pipe for utility boiler with heavy caliber and large thickness are analyzed

as well as the performance of the welded joint was tested. The test results show that the matched welding material with 5% ～10% δ ferrite has good weldability

controllable weld quality

and the mechanical properties of the welded joints can meet the requirements of the standards and engineering applications.