核电厂非再生式热交换器管板密封焊缺陷修复

吴小锋; 丁礼俊; 闵玉龙; 陈英杰; 毕常存

中国核电焊接技术 | 浏览量 : 0 下载量: 859 CSCD: 0

PDF
导出
分享
收藏
专辑

核电厂非再生式热交换器管板密封焊缺陷修复
Repair technology of seal weld defects in tube to tube plate of non-regenerative heat exchanger in nuclear power plant
2019年49卷第4期页码：357-361
纸质出版：2019
DOI：
稿件说明：

移动端阅览

吴小锋, 丁礼俊, 闵玉龙, 等. 核电厂非再生式热交换器管板密封焊缺陷修复[J]. 电焊机, 2019,49(4):357-361. DOI：

WU Xiaofeng, DING Lijun, MIN Yulong, et al. Repair technology of seal weld defects in tube to tube plate of non-regenerative heat exchanger in nuclear power plant[J]. Eletric Welding Machine2019, 49(4): 357-361. DOI：

摘要

通过对核电厂非再生式热交换器管板密封焊缺陷修复技术进行研究

介绍了缺陷挖补修复的工艺过程和技术要求。第一道自熔加第二道填丝的补焊工艺在管板密封焊缺陷修复工程的成功应用

保障了焊接质量

促进了焊缝成形

提高了维修效率。该技术可实现热交换器管板密封焊役致缺陷的在线修复

为后续类似工作的开展提供重要的参考依据。

Abstract

Base on the research of repair technology on seal welding defects of non-regenerative heat exchanger tube to tube plate in nuclear power plant

the process and technical requirements of repairing defects are introduced in this paper. The successful application of the repair welding technology of the first pass self-fluxing and the second filler wire in the repair engineering of seal welding defects of the tube to tube plate has guaranteed the welding quality

promoted the weld forming and improved the maintenance efficiency.This technology can realize the on-line repair of seal weldind defects on heat exchanger tube to tube plate and provide an important reference for the following similar work.