TSC型动态无功补偿半物理仿真系统设计

生龙; 暴正阳; 陆锋

重点关注 | 浏览量 : 0 下载量: 583 CSCD: 2

PDF
导出
分享
收藏
专辑

TSC型动态无功补偿半物理仿真系统设计
Design of TSC dynamic reactive power compensation hardware-in-the-loop simulation system
2019年49卷第2期页码：24-29
纸质出版：2019
DOI：
稿件说明：

移动端阅览

生龙, 暴正阳, 陆锋. TSC型动态无功补偿半物理仿真系统设计[J]. 电焊机, 2019,49(2):24-29. DOI：

SHENG Long, BAO Zhengyang, LU Feng. Design of TSC dynamic reactive power compensation hardware-in-the-loop simulation system[J]. Eletric Welding Machine2019, 49(2): 24-29. DOI：

摘要

针对在研究冲击性负荷的无功补偿策略时面临的实验条件苛刻、成本高、危险性大等问题

提出了一种基于QuaRC平台和DSP控制器的TSC型动态无功补偿半物理仿真系统。根据典型冲击性负荷——点焊机的实际工况

在仿真环境中建立了实验对象

选取了一种无功补偿策略并在DSP控制器中实现。仿真结果符合实际情况

验证了本系统设计方案的合理性。

Abstract

In view of problems such as harsh condition

high-cost and high-risk in experiments in the research of reactive power compensation for impact load

a TSC dynamic reactive power compensation hardware-in-the-loop simulation system based on QuaRC platform and DSP is proposed. According to working characteristics of typical impact load

spot-welders

experimental subject is established in the simulation environment

and a reactive power compensation strategy is selected and implemented in the DSP.Simulation result conforming with actual conditions

the reasonability of the design of the system is verified.