异形组合钢板剪力墙的制作及变形控制研究

杜冰冰; 阙子雄; 王笛; 水峰; 杨旺

焊接工艺 | 浏览量 : 0 下载量: 1382 CSCD: 0

PDF
导出
分享
收藏
专辑

异形组合钢板剪力墙的制作及变形控制研究
Research on fabrication and deformation control of shaped composite steel plate shear wall
2019年49卷第1期页码：124-128
纸质出版：2019
DOI：
稿件说明：

移动端阅览

杜冰冰, 阙子雄, 王笛, 等. 异形组合钢板剪力墙的制作及变形控制研究[J]. 电焊机, 2019,49(1):124-128. DOI：

DU Bingbing, QUE Zixiong, WANG Di, et al. Research on fabrication and deformation control of shaped composite steel plate shear wall[J]. Eletric Welding Machine2019, 49(1): 124-128. DOI：

摘要

以大截面异形组合钢板剪力墙为例

着重阐述钢板墙制作的重点及控制难点。针对钢板墙板材较薄

宽度大

焊接后波浪变形、鼓包变形、旁弯、扭曲等变形均较大的特点

通过选择合理的工艺制作流程

有效的焊接工艺以及变形控制及矫正等措施

有效地控制了构件的整体尺寸

实现构件的制作质量精度要求。

Abstract

Taking the special shaped composite steel plate shear wall as an example

the key points and control difficulties in the steel plate wall production are expound. For the characteristics of steel plate wall like relatively thin plate

large width

large wave deformation

bulge deformation

side bend and twist after welding

some necessary measures such as a reasonable technological process

effective welding technology

deformation control and correction are took to control the size of component effectively and meet the manufacturing quality accuracy requirements of component.