2219铝合金FSW接头低温力学性能研究

丁延松; 曲文卿; 李来平

焊接工艺 | 浏览量 : 0 下载量: 584 CSCD: 2

PDF
导出
分享
收藏
专辑

2219铝合金FSW接头低温力学性能研究
Mechanical properties of FSW joint of 2219 aluminum alloy at low temperature
2019年49卷第1期页码：85-88
纸质出版：2019
DOI：
稿件说明：

移动端阅览

丁延松, 曲文卿, 李来平. 2219铝合金FSW接头低温力学性能研究[J]. 电焊机, 2019,49(1):85-88. DOI：

DING Yansong, QU Wenqing, LI Laiping. Mechanical properties of FSW joint of 2219 aluminum alloy at low temperature[J]. Eletric Welding Machine2019, 49(1): 85-88. DOI：

摘要

2219铝合金广泛应用于运载火箭推进剂贮箱中

但其气孔敏感性较强

而搅拌摩擦焊是固相连接技术

不仅可以降低2219铝合金的气孔敏感性

还可以提高其焊接接头强度系数

是适合于2219铝合金的焊接工艺。分析-183℃、-120℃下2219铝合金母材和FSW接头的力学性能和断口

并与室温下的力学性能和断口进行对比。结果表明:2219铝合金母材和FSW接头的低温力学性能优于室温。

Abstract

The 2219 aluminum alloy is widely used in the carrier rocket propellant storage tank

but the sensitivity of its gas pore is strong.Friction stir welding is a solid-phase joining technology

which can not only reduce the gas pore sensitivity of 2219 aluminum alloy

but also improve the strength coefficient of welded joint. It is a suitable welding technology for 2219 aluminum alloy. The mechanical properties and fractures of 2219 aluminum alloy base metal and FSW joints at-183 °C and-120 °C are analyzed and compared with those at room temperature. The results show that the mechanical properties of 2219 aluminum alloy base material and FSW joint at low temperature are better than those at room temperature.