Optimisation of Laser Welding Process Parameters for Cu-Ti Dissimilar Metals

PANG Lihui; LIU Fei; GAO Ping; CHEN Nuo

doi:10.7512/j.issn.1001-2303.2025.02.10

Laser Technology and Application Innovation | Views : 0 下载量: 0 CSCD: 0

PDF
Export
Share
Collection
Album

Optimisation of Laser Welding Process Parameters for Cu-Ti Dissimilar Metals
Vol. 55, Issue 2, Pages: 95-101(2025)
Received：21 February 2024，

Revised：01 April 2024，

Published：20 February 2025
DOI： 10.7512/j.issn.1001-2303.2025.02.10
稿件说明：

移动端阅览

庞立辉，刘飞，高平，等.铜/钛异种金属激光焊焊接工艺参数优化［J］.电焊机，2025，55（2）：95-101. DOI： 10.7512/j.issn.1001-2303.2025.02.10.

PANG Lihui, LIU Fei, GAO Ping, et al.Optimisation of Laser Welding Process Parameters for Cu-Ti Dissimilar Metals[J].Electric Welding Machine, 2025, 55(2): 95-101. DOI： 10.7512/j.issn.1001-2303.2025.02.10.

摘要

使用激光焊的方法对厚度均为1 mm的TA15钛合金和T2铜进行了焊接，通过比较不同焊接参数下焊接接头的宏观形貌、显微形貌、力学性能等，在焊接速度为13 mm/s，焊接功率为600 W时得到了综合性能较好的焊接接头。选取具有典型形貌的显微组织形貌进行分析，结合EDS和XRD测试结果，对焊缝的相组成进行分析，得出焊缝主要由Cu

Ti+Cu

Ti共晶组织以及CuTi

化合物组成。当焊接速度过慢或过快时，铜/钛异种金属激光焊的焊缝中会出现裂纹、孔洞等焊接缺陷，这极大削弱了焊接接头的力学性能。对焊接接头的拉伸断口进行分析，表明拉伸断口为典型的脆性解理断裂。对焊接接头显微硬度的测试结果表明，焊缝主要由铜钛化合物组成，在铜侧热影响区内存在明显的接头软化现象。

Abstract

By comparing the macroscopic morphology

micromorphology

and mechanical properties of the welded joints under various welding parameters

the welded joints with better comprehensive performance were obtained at the welding speed of 13 mm/s and the welding power of 600 W. In this paper

TA15 titanium alloy and T2 copper with a thickness of 1 mm were welded by laser welding. After choosing the microstructure morphology with the typical morphology analysis

the phase composition of the weld was examined by integrating the findings of the XRD and EDS tests. It was found that CuTi

compound and the Cu

Ti+Cu

Ti eutectic structure made up the majority of the weld. When welding copper/titanium dissimilar metals with a laser

there will be holes

cracks

and other welding flaws in the weld

which significantly reduces the mechanical qualities of the welded connection. After analysis

it was determined that

the tensile fracture of the welded joint was a common brittle cleavage fracture. The microhardness test findings of the welded joint indicate that the weld is mostly made up of copper-titanium compounds

and the heat-affected zone on the copper side clearly exhibits a joint softening phenomenon.

关键词

Keywords

references

周俊，陈灿阳，张晶 . 近红外光和蓝光激光焊接Ti/Cu异种金属工艺研究［J］. 稀有金属， 2023 ， 47 （ 05 ）： 738 - 747 .

ZHOU J ， CHEN C Y ， ZHANG J . Study on the process of Ti/Cu dissimilar metals welding by near-infrared light and blue light laser ［J］. Rare Metals ， 2023 ， 47 （ 05 ）： 738 - 747 .

刘欢，高晓龙，刘晶 . Ti6Al4V/Cu异种金属激光焊接头组织及性能研究［J］. 焊接， 2019 （ 10 ）： 7 - 11 .

LIU H ， GAO X L ， LIU J . Study on the organisation and properties of Ti6Al4V/Cu dissimilar metal laser welded joints ［J］. Welding & Joining ， 2019 （ 10 ）： 7 - 11 .

朱军，郭顺，彭勇，等 . 钛/铜电子束偏置焊接模拟及力学性能研究［J］. 航空制造技术， 2019 ， 62 （ 18 ）： 36 - 42 .

ZHU J ， GUO S ， PENG Y ， et al . Simulation and Mechanical Properties of Electron Beam Bias Welding of Ti/Cu ［J］. Aeronautical Manufacturing Technology ， 2019 ， 62 （ 18 ）： 36 - 42 .

潘明财，周杰，郭顺，等 . 铜/钛异种金属焊接微观组织及力学性能研究［J］. 铜业工程， 2023 （ 02 ）： 1 - 7 .

PAN M C ， ZHOU J ， GUO S ， et al . Study on microstructure and mechanical properties of Cu/Ti dissimilar metal welding ［J］. Copper Engineering ， 2023 （ 02 ）： 1 - 7 .

Deng Y Q ， Cong W ， Xu H B . Designing of a thin Mo diffusion barrier towards strong and reliable Ti/Cu dissimilar brazing ［J］. Materials Science and Engineering：A ， 2020 ， 786 ： 139469 .

Zhao Y ， Wang W ， Yan K ， et al . Microstructure and properties of Cu/Ti laser welded joints ［J］. Journal of Materials Processing Technology ， 2018 ， 257 ： 244 - 249 .

Gao X L ， Liu H ， Liu J ， et al . Laser welding of Ti6Al4V to Cu using a niobium interlayer ［J］. Journal of Materials Processing Technology ， 2019 ， 270 ： 293 - 305 .

郭顺，罗添元，彭勇，等 . Ti-Cu异种金属电子束焊接界面行为［J］. 焊接学报， 2019 ， 40 （ 8 ）： 26 - 32 .

GUO S ， LUO T Y ， PENG Y ， et al . Interfacial behavior of Ti-Cu dissimilar metal electron beam welding ［J］. Transactions of the China welding institution ， 2019 ， 40 （ 8 ）： 26 - 32 .

Guo S ， Zhou Q ， Peng Y ， et al . Study on strengthening mechanism of Ti/Cu electron beam welding ［J］. Materials & Design ， 2017 ， 121 ： 51 - 60 .

Guo S ， Peng Y ， Cui C ， et al . Forming and tensile fracture characteristics of Ti-6Al-4V and T2 Cu vacuum electron beam welded joints ［J］. Vacuum ， 2019 ， 165 ： 311 - 319 .

Huang L ， Dong H ， Ma Y ， et al . Interfacial layer regulation and its effect on mechanical properties of Ti6Al4V titanium alloy and T2 copper dissimilar joints by cold metal transfer welding ［J］. Journal of Manufacturing Processes ， 2022 ， 75 ： 1100 - 1110 .

Paul H ， Chulist R ， Miszczyk M ， et al . Towards a better understanding of the phase transformations in explosively welded copper to titanium sheets ［J］. Materials Science and Engineering：A ， 2020 ， 784 ： 139285 .

Paul H ， Chulist R ， Miszczyk M M ， et al . Interfacial reactions and structural properties of explosively welded titanium/copper plates ［J］. IOP Conference Series： Materials Science and Engineering ， 2020 ， 770 （ 1 ）： 2001521 .

Paul H ， Skuza W ， Chulist R ， et al . The Effect of Interface Morphology on the Electro-Mechanical Properties of Ti/Cu Clad Composites Produced by Explosive Welding ［J］. Metallurgical and Materials Transactions A ， 2019 ， 51 （ 2 ）： 750 - 766 .

夏良俊，秦优琼，唐贤锋 . 钎焊工艺参数对TC4钛合金钎焊接头组织及性能的影响［J］. 热加工工艺， 2024 ， 48 （ 15 ）： 171 - 173 .

XIA L J ， QIN Y Q ， TANG X F . Effect of brazing process parameters on the organisation and properties of TC4 titanium alloy brazed joints ［J］. Hot Working Technology ， 2024 ， 48 （ 15 ）： 171 - 173 .

Sadeghian A ， Iqbal N . A review on dissimilar laser welding of steel-copper， steel-aluminum， aluminum-copper， and steel-nickel for electric vehicle battery manufacturing ［J］. Optics & Laser Technology ， 2022 ， 146 ： 107595 .

Bi Y ， Xu Y ， Zhang Y ， et al . Single-pass laser welding of TC4 Ti alloy to 304 SS with V interlayer and V/Cu bilayer ［J］. Materials Letters ， 2021 ， 285 ： 129072 .

Zhu Y D ， Yan M F ， Zhang Y X ， et al . First-principles investigation of structural，mechanical and electronic properties for Cu-Ti intermetallics ［J］. Computational Materials Science ， 2016 （ 123 ）： 70 - 78 .

Yang H K ， Zeng B ， Wang H ， et al . Phase equilibria and thermodynamic re-assessment of the Cu-Ti system ［J］. Computer Coupling of Phase Diagrams and Thermochemistry ， 2023 （ 82 ）： 102594 .

Alert me when the article has been cited

提交

International Certification of Laser Welding Process and Personnel

Numerical Simulation of Weld Pool Formation Driven by Surface Tension in Laser Welding of Austenitic Stainless Steel Sheet

Study on Microstructure and Properties of Industrial Pure Titanium TA1 by Laser Welding

Study on the Influence of Active Flux on the Dynamic Behavior of Molten Pool During Laser Welding

Research Progress in Laser Welding Technology of TC4 Titanium Alloy