Effect of Annealing on Microstructure Evolution and Element Distribution of Welded Joint of Bimetal Band Saw Blade

LIU Huan; LUO Lin; WANG Qilong; HAO Zecai; CHEN Xinwu; LI Shusong; YANG Quanyi

doi:10.7512/j.issn.1001-2303.2024.07.15

Welding Technology | Views : 0 下载量: 5 CSCD: 0

PDF
Export
Share
Collection
Album

Effect of Annealing on Microstructure Evolution and Element Distribution of Welded Joint of Bimetal Band Saw Blade
Vol. 54, Issue 7, Pages: 105-109(2024)
Published： 25 July 2024 ，
DOI： 10.7512/j.issn.1001-2303.2024.07.15
稿件说明：

扫描看全文

刘欢，罗琳，王其龙，等.退火对双金属带锯条焊接接头组织演变及元素分布规律的影响［J］.电焊机，2024，54（7）：105-109.

LIU Huan, LUO Lin, WANG Qilong, et al.Effect of Annealing on Microstructure Evolution and Element Distribution of Welded Joint of Bimetal Band Saw Blade[J].Electric Welding Machine, 2024, 54(7): 105-109.
刘欢，罗琳，王其龙，等.退火对双金属带锯条焊接接头组织演变及元素分布规律的影响［J］.电焊机，2024，54（7）：105-109. DOI： 10.7512/j.issn.1001-2303.2024.07.15.

LIU Huan, LUO Lin, WANG Qilong, et al.Effect of Annealing on Microstructure Evolution and Element Distribution of Welded Joint of Bimetal Band Saw Blade[J].Electric Welding Machine, 2024, 54(7): 105-109. DOI： 10.7512/j.issn.1001-2303.2024.07.15.

摘要

双金属带锯条由M42高速钢齿材和B2000高强度钢背材焊接而成，焊接后易产生焊接热应力，影响其焊缝性能。研究了双金属带锯条焊接接头经过820 ℃（退火炉中）退火再随炉冷却后的组织演变和元素分布规律。结果表明，退火后的焊缝组织由柱状晶逐渐演变为碳化物球化，Mo、Cr、V、W等合金元素与C形成碳化物并逐渐球化，导致合金元素在接头处团聚。此外，退火过程中元素扩散系数增大，使得双金属带锯条的母材中的元素向焊缝中扩散，形成了M

C型、M

型和MC型碳化物，降低了焊缝硬度。该研究结果为双金

属带锯条焊接接头的退火工艺优化提供了理论依据，有助于提高双金属带锯条的质量和使用寿命。

Abstract

The bimetal bandsaw blade is welded with M42 high-speed steel tooth material and B2000 high-strength steel back material. The tooth material has high red hardness and strength

while the back material has good toughness. However

welding can easily generate thermal stress

affecting the performance of the weld. This study investigates the microstructure evolution and element distribution of the welded joint of the bimetal bandsaw blade after annealing at 820℃ (in a annealing furnace) and then cooling with the furnace. The results show that the microstructure of the weld evolves from columnar grains to spheroidized carbides after annealing. Alloying elements such as Mo

and W form carbides with C and gradually spheroidize

leading to the agglomeration of alloying elements at the joint. Moreover

the increased element diffusion coefficient during annealing causes the elements in the base metal of the bimetal bandsaw blade to diffuse into the weld

forming M6C

M23C6

and MC type carbides

which reduce the hardness of the weld. This research provides a theoretical basis for the optimization of the annealing process of the welded joint of bimetal bandsaw blades

which can help improve the quality and service life of bimetal bandsaw blades.

关键词

双金属带锯条退火焊接接头碳化物球化元素分布

Keywords

bimetal bandsaw bladeannealingwelded jointcarbide spheroidizationelement distribution

references

潘春旭. 异种钢及异种金属焊接：显微结构特征及其转变机理［M］. 北京：人民交通出版社， 2000.

冯吉才. 异种材料真空电子束焊接研究现状分析［J］.焊接学报， 2009（10）： 108-112.

FENG J C. Research status analysis of electron beam welding for joining of dissimilar materials［J］. Transactions of The China Welding Institution，2009（10）：108-112.

Anawa E M，Olabi A G. Control of welding residual stress for dissimilar laser welded materials［J］. Journal of materials processing technology，2008，204：22-33.

欧阳页先，吴青松，张新仁，等. 退火工艺对超低碳钢冷轧薄板力学性能的影响［J］. 武汉工程职业技术学院学报，2009，21（2）：21-24+31.

OUYANG Y X，WU Q S，ZHANG X R，et al. Effects of Annealing Processes on Mechanical Properties for Ultra-low Carbon Cold Rolled Sheets［J］. Journal of Wuhan Engineering Institute，2009，21（2）：21-24+31.

Sandvik B P J，Wayman C M. Crystallography and substructure of lath martensite formed in carbon steels［J］. Metallography，1983，16（2）：199-227.

杨丽颖，柳伟，路民旭. C4镍基合金与X60钢焊接接头的组织和腐蚀性能［J］. 材料热处理学报，2008，29（2）：114-118.

YANG L Y，LIU W，LU M X Study on microstructure and corrosion property of weld joint for C4 Ni-base alloy and X60 steel［J］. Transactions of Materials and Heat Treatment，2008，29（2）：114-118.

王嘉，杨全毅，王娟，等. 双金属带锯条组织与退火冷却方式影响研究［J］. 电焊机，2019，49（08）：99-103.

WANG J，YANG Q Y，WANG J，et al. Research on the microstructure and annealing cooling mode of bimetal hacksaw blades［J］. Electric Welding Machine，2019，49（08）：99-103.

高建昌，邵红红，许友谊. 20CrMo钢与45钢激光对接焊接头的组织与性能［J］. 金属热处理，2006，31（3）： 75-77.

GAO J C，SHAO H H，XU Y Y. Microstructure and Properties of 20CrMo and 45 Steel Joint by Laser Butt-Welding［J］.Heat Treatment of Metals，2006，31（3）：75-77.

崔忠圻. 金属学及热处理［M］. 北京：机械工业出版社，1989

杨全毅，王娟，刘发安，等. 异种钢焊接接头退火工艺研究-焊缝性能与保温时间［J］. 电焊机，2015，45（08）：26-31.

YANG Q Y，WANG J，LIU F A，et al. Research on annealing process for welded joint of the dissimilar steel——weld property and holding time［J］. Electric Welding Machine，2015，45（08）：26-31.

Alert me when the article has been cited

提交

Research on SAW Welding Properties of SA517 Gr.B

Research Progress on Corrosion of 7N01 Aluminum Alloy Welded Joint