Laser Cladding of Iron-Chromium Gradient Coatings: Interface Regulation and Performance Improvement

YIN Ming; GUO Zhiliang; PANG Yaqi; LI Yan

doi:10.7512/j.issn.1001-2303.2024.07.03

Important Issuse | Views : 0 下载量: 994 CSCD: 0

PDF
Export
Share
Collection
Album

Laser Cladding of Iron-Chromium Gradient Coatings: Interface Regulation and Performance Improvement
Vol. 54, Issue 7, Pages: 20-25(2024)
Received：27 May 2024，

Revised：2024-06-03，

Published：25 July 2024
DOI： 10.7512/j.issn.1001-2303.2024.07.03
稿件说明：

移动端阅览

阴明，郭枝梁，庞雅琪，等.激光熔覆铁铬梯度涂层界面调控与性能研究［J］.电焊机，2024，54（7）：20-25. DOI： 10.7512/j.issn.1001-2303.2024.07.03.

YIN Ming, GUO Zhiliang, PANG Yaqi, et al.Laser Cladding of Iron-Chromium Gradient Coatings: Interface Regulation and Performance Improvement[J].Electric Welding Machine, 2024, 54(7): 20-25. DOI： 10.7512/j.issn.1001-2303.2024.07.03.

摘要

为解决螺杆钻具磨损问题，通过激光熔覆技术在45钢基材上制备了铁铬梯度涂层。针对梯度涂层熔覆过程中常见的开裂问题，提出了调控熔覆层粉末成分的优化策略，采用不同碳含量的熔覆粉末构建了硬度梯度，并通过熔覆JG-3过渡层优化了界面结合。研究表明，梯度涂层硬度呈梯度上升，耐磨性逐步提升；JG-3过渡层可以促进基体与熔覆层之间的界面结合，有效连接了不同硬度的熔覆层，避免了裂纹产生；断口形貌分析表明，熔覆层呈现出典型的“河流花样”的解理断裂特征，不规则的金属氧化物可以撕裂熔覆层基体，显著降低其熔覆层性能，应对熔覆后的每层表面进行抛光处理，以保证完全清除界面间的氧化层。制备的铁铬梯度层的连接界面保持平整无裂纹。该研究结果为解决梯度涂层熔覆时的开裂问题提供了有效的解决方案与依据。

Abstract

Iron-chromium gradient coatings were prepared on 45 steel substrates using laser cladding technology to address the wear issue of screw drills. To tackle the common cracking problem during the cladding process

an optimization strategy was proposed to regulate the powder composition of the gradient coatings. Gradient hardness was achieved using cladding powders with different carbon contents

and the interface bonding was improved by introducing a JG-3 transition layer. The study revealed that the gradient coatings exhibited a gradual increase in hardness and enhanced wear resistance. The JG-3 transition layer effectively promoted the interfacial bonding between the substrate and the cladding layer

connecting different hardness layers and preventing cracking. Fracture morphology analysis indicated that the cladding layer exhibited typical “river pattern” cleavage fracture characteristics. Irregular metal oxides could tear the cladding layer matrix

significantly reducing its performance. Therefore

surface polishing of each layer after cladding is recommended to ensure complete removal of interfacial oxide layers. The prepared iron-chromium gradient coatings maintained a smooth and crack-free interface

providing an effective solution and basis for addressing cracking issues during the cladding process of gradient coatings.

关键词

Keywords

references

郭毅军，雷自成，关永康，等 . 阀杆失效分析及其表面激光熔覆修复［J］. 电焊机， 2024 ， 54 （ 4 ）： 43 - 49 .

GUO Y J ， LEI Z C ， GUAN Y K ， et al . Failure analysis of valve stems and their laser cladding repair ［J］. Electric Welding Machine ， 2024 ， 54 （ 4 ）： 43 - 49 .

WEI R Z ， MAO M H ， LIANG J G ， et al . Repair feasibility and performance enhancement analysis of Fe-based alloy coating on ductile iron surface by high-speed laser cladding ［J］. Materials Today Communications ， 2024 ， 39 ： 108638 .

LIU J Y ， LI B L ， ZHANG S ， et al . Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting： Enhancement of mechanical properties and improvement of corrosion resistance ［J］. Intermetallics ， 2024 ， 164 ： 108103

庞义斌，胡凤娇，张峰，等 . 激光熔覆修复30CrMnSiA合金钢的显微组织和性能研究［J］. 电焊机， 2023 ， 53 （ 1 ）： 77 - 83 .

PANG Y ， HU F J ， ZHANG F ， et al . Study on microstructure and properties of 30CrMnSiA alloy steel coating repaired by laser cladding ［J］. Electric Welding Machine ， 2023 ， 53 （ 1 ）： 77 - 83 .

CHEN W J ， CAI Q ， LUO Z Y ， et al . Influence of heat treatment on strength and toughness of laser cladding iron-based coatings ［J］. Materials Letters ， 2023 ， 335 ： 133733 .

王彦芳，李豪，石志强，等 . 激光熔覆高耐蚀Fe基固溶体合金涂层［J］. 红外与激光工程， 2017 ， 46 （ 8 ）： 61 - 65 .

WANG Y F ， LI H ， SHI Z Q ， et al . Laser cladding Fe-based solid solution alloy coating with high corrosion resistance ［J］. Infrared and Laser Engineering ， 2017 ， 46 （ 8 ）： 61 - 65 .

周鼎，姚迪，罗家成，等 . 激光修复技术研究进展综述及其在核电领域的应用前景分析［J］. 电焊机， 2021 ， 52 （ 01 ）： 77 - 88 .

ZHOU D ， YAO D ， LUO J C ， et al . Review on laser repairing technique and its potential applications in nuclear power industry ［J］. Electric Welding Machine ， 2022 ， 52 （ 01 ）： 77 - 88 .

张华健，孙中刚，李峰，等 . 激光熔覆铁基复合涂层组织与性能影响［J］. 表面技术， 2018 ， 47 （ 12 ）： 127 - 133 .

SUN H J ， SUN Z G ， LI F ， et al . Effect of microstructure and properties of laser cladding iron-based composite coatings ［J］. Surface Technology ， 2018 ， 47 （ 12 ）： 127 - 133 .

SHI Y ， LI Y M ， LIU J ， et al . Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel ［J］. Optics & Laser Technology ， 2018 ， 99 ： 256 - 270 .

王强，杨驹，牛文娟，等 . 高速激光熔覆铁基TY-2合金组织及力学性能分析［J］. 表面技术， 2021 ， 50 （ 7 ）： 66 - 73 .

WANG Q ， YANG J ， NIU W J ， et al . Microstructure and mechanical properties of Fe-based TY-2 alloy coatings by high-speed laser cladding ［J］. Surface Technology ， 2021 ， 50 （ 7 ）： 66 - 73 .

程宗辉，张志强，范朝，等 . 30CrMnSiNi2A表面激光熔敷不同粉末涂层组织与性能对比研究［J］. 电焊机， 2022 ， 52 （ 3 ）： 29 - 35 .

CHENG Z H ， ZHANG Z Q ， FAN Z ， et al . Comparative study on the organization and properties of different powder coatings by laser melting on the surface of 30CrMnSiNi2A ［J］. Electric Welding Machine ， 2022 ， 52 （ 3 ）： 29 - 35 .

Alert me when the article has been cited

提交

Research on the Microstructure and Performance of Dual-layer Wear-resistant Alloy Steel Plate with Laser Cladding

Research on Laser Strengthening Process and Performance of the Sealing Surface of the Inlet Valve Seat for High-Performance Sucker Pumps

Study on Repair Process of Corrosion Pits in Aircraft Engine Guide Vane Inner Ring Using Laser Cladding Technology

Microstructure and Properties of Laser-cladding CX Stainless Steel Coating on 45 Steel Surface

Effect of Annealing Temperature on Microstructure and Properties of Laser Cladding Stellite 6 Alloy on 12Cr1MoV Steel Surface