Development of Acid Stainless Steel Electrode E308-16 Without Rebaking

LI Hao; LI Lian; HE Xiu; WEI Xingzhu

doi:10.7512/j.issn.1001-2303.2022.11.16

Welding Material | Views : 0 下载量: 1084 CSCD: 0

PDF
Export
Share
Collection
Album

Development of Acid Stainless Steel Electrode E308-16 Without Rebaking
Vol. 52, Issue 11, Pages: 107-112(2022)
Received：19 July 2022，

Revised：2022-10-21，

Published：25 November 2022
DOI： 10.7512/j.issn.1001-2303.2022.11.16
稿件说明：

移动端阅览

李昊，李莲，何秀，等.免复烘焙E308-16不锈钢焊条的研制［J］.电焊机，2022，52（11）：107-112. DOI： 10.7512/j.issn.1001-2303.2022.11.16.

LI Hao, LI Lian, HE Xiu, et al.Development of Acid Stainless Steel Electrode E308-16 Without Rebaking[J].Electric Welding Machine, 2022, 52(11): 107-112. DOI： 10.7512/j.issn.1001-2303.2022.11.16.

摘要

针对使用前没有复烘焙条件或不愿意复烘焙直接使用E308焊条的用户，研发了一种免复烘焙焊条。通过加入适当的氟化物及稳弧剂、脱水处理金红石和长石等措施有效改善了交流电弧稳定性及气孔敏感性；在药皮中增加大理石含量有利于改善焊缝抗气孔敏感性和提高立焊工艺性能。免复烘焙焊条经3~6天、湿度50%~80%加速吸潮后进行焊接气孔敏感性对比测试，抗气孔敏感性明显优于常规E308焊条。通过对比两种配方焊条电弧稳定性、脱渣性、再引弧性、飞溅率、焊条药皮抗发红、开裂性及立焊工艺性发现，免复烘焊条和需要复烘的焊条焊接工艺性相当；通过理化性能的对比测试，力学性能接近、化学成分也相当，满足标准和用户使用要求。

Abstract

The product is developed for users who have no re baking conditions before use or are unwilling to re bake and directly use acid stainless steel electrodes. The addition of appropriate fluoride and arc stabilizer is very beneficial to improve the arc stability and porosity sensitivity; the addition of marble in the coating can improve the anti porosity sensitivity of the weld and the vertical welding process performance; dewatering treatment of rutile and feldspar is conducive to improving the anti porosity sensitivity of weld. After 3 to 6 days and 50%~80% humidity accelerated moisture absorption

the developed electrode has better anti porosity sensitivity than the conventional acid stainless steel electrode. By comparing the arc stability

slag removal

arc re ignition

spatter rate

electrode coating anti redness

cracking and vertical welding process of the two kinds of electrodes

the welding process performance of the electrode without re drying is equivalent to that of the electrode requiring re drying. Through the contrast test of physical and chemical properties

the mechanical properties are close

the chemical composition is equivalent

and the results are excellent

which fully meet the requirements of standards and users.

关键词

Keywords

references

英若采 . 熔焊原理及金属材料焊接［M］. 北京：机械工业出版社， 2000 ： 94 - 100 .

韦转，龙昌茂，叶克力，等 . A102焊条焊缝金属中氢的行为研究［J］. 焊接技术， 2010 ， 39 （ 12 ）： 50 - 53 .

WEI Z ， LONG C M ， YE K L ， et al . Behavior of hydrogen in weld metal of A102 electrode ［J］. Welding Technology ， 2010 ， 39 （ 12 ）： 50 - 53 .

张心保，孙咸，陶保国 . 铬镍奥氏体不锈钢焊接中气孔的影响因素［J］. 山西科技， 2002 （ 2 ）： 55 - 57 .

ZHANG X B ， SUN X ， TAO B G . Influencing Factors of the Porosity in Welding of Chrome-Nickel Austenic Stainless Steel ［J］. Shanxi Science and Technology ， 2002 （ 2 ）： 55 - 57 .

石保庆，戴维新，刘琼，等 . 酸性不锈钢焊条气孔敏感性研究［C］// 第九次全国焊接会议论文集 . 黑龙江：黑龙江人民出版社， 1999 ： 555 - 558 .

蒋成刚 . 国产不锈钢焊条气孔的研究［C］// 第九次全国焊接会议论文集 . 黑龙江：黑龙江人民出版社， 1999 ： 559 - 562 .

李典钊，李昊，邹杨 . 超级双相不锈钢焊条CHS2553的研制［J］. 金属加工（热加工）， 2008 （ 18 ）： 57 - 60 .

LI D Z ， LI H ， ZOU Y . Development of Super Duplex Stainless Steel Electrode CHS2553 ［J］. MW Metal Forming ， 2008 （ 18 ）： 57 - 60 .

中国国家标准化管理委员会 . 焊接材料焊接工艺性能评定方法： GB/T 25776—2010 ［S］. 北京：中国标准出版社， 2010 .

中国国家标准化管理委员会 . 不锈钢焊条： GB/T 983-2012 ［S］. 北京：中国标准出版社， 2012 .

Rozenak P ， Eliezer D . Hydrogen effects on phase transformations in austenitic stainlesssteels ［J］. Journal of Materials Science ， 1984 ， 19 ： 567 - 573 .

邹小平，魏超，刘铁刚，等 . 基于焊条自动焊的不锈钢焊条工艺性研究［J］. 电焊机， 2022 ， 52 （ 02 ）： 42 - 48 .

ZOU X P ， WEI C ， LIU T G ， et al . Research on Process of Stainless Steel Electrode Based on Automatic Robot Electrode Welding ［J］. Electric Welding Machine ， 2022 ， 52 （ 02 ）： 42 - 48 .

Alert me when the article has been cited

提交

Effect of welding process on the porosity sensitivity of aluminum alloy pulse MIG horizontal welding

Development and Performance Evaluation of a 550 MPa-Grade Low-Hydrogen, High-Toughness Flux-Cored Wire for All-Position Welding

Verification and Reliability Assessment of Hydraulic Welding Models Using Welding Materials Compatible with 1 000 MPa-grade High-strength Steel for Hydrostatic Testing

Effects of Welding Thermal Cycle and Post-Weld Aging on the Microstructure and Mechanical Properties of GH2070P Fe-Ni-Based Superalloy Welded Joints

Laser Welding of HR-2 Hydrogen-Resistant High-Strength Steel Pipes: Process Parameters and Mechanical Properties