Defect detection and analysis of carbon brazing composites by ultrasound C-scanning

SHAN Qingqun; SONG Shaolong; SUN Wei

Views : 0 下载量: 2052 CSCD: 4

PDF
Export
Share
Collection
Album

Defect detection and analysis of carbon brazing composites by ultrasound C-scanning
Vol. 49, Issue 6, Pages: 111-115(2019)
Published：2019
DOI：
稿件说明：

移动端阅览

DOI：

SHAN Qingqun, SONG Shaolong, SUN Wei. Defect detection and analysis of carbon brazing composites by ultrasound C-scanning[J]. Eletric Welding Machine2019, 49(6): 111-115. DOI：

摘要

研究了动车转向架中碳纤维复合材料连接结构的超声扫描检测方法。采用超声C扫描方法采集缺陷信息

针对碳纤维复合材料连接构件建立手动超声成像检测系统

避免了常规超声自动扫描成像对不规则曲面结构适应性差的技术弊端

使检测过程实时、快速、柔性;在KSW熵方法基础上

基于几何建模

对三维模型建立二值化图像

编制计算程序得到缺陷覆盖面积和缺陷覆盖率

实现了构件三维图像中缺陷的可视化检测

避免了常规肉眼观测

提高了检测结果可信度。

Abstract

In this paper

the ultrasonic scanning detection method of carbon fiber reinforced composite（CFRP） joints in the bogies of electric vehicles is studied. The defect information is collected by ultrasonic C-scan method

and a manual ultrasonic imaging detection system is established for carbon fiber reinforced composite connectors

which avoids the technical drawbacks of poor adaptability of conventional ultrasonic automatic scanning imaging to irregular surface structures

and makes the detection process real-time

fast and flexible. Based on the KSW entropy method

a geometric model is established and two three-dimensional models are built. The defect coverage area and the defect coverage rate are obtained by the computed program. The visualized defect detection in the three-dimensional image of the component is realized

which avoids the naked eye observation in the conventional method and improves the reliability of the detection results.