Post-welding heat treatment process of equipment hatch for CAP1400 nuclear power plant

YU Jie; DONG Yongzhi

Views : 0 下载量: 673 CSCD: 0

PDF
Export
Share
Collection
Album

Post-welding heat treatment process of equipment hatch for CAP1400 nuclear power plant
Vol. 49, Issue 4, Pages: 352-356(2019)
Published：2019
DOI：
稿件说明：

移动端阅览

DOI：

YU Jie, DONG Yongzhi. Post-welding heat treatment process of equipment hatch for CAP1400 nuclear power plant[J]. Eletric Welding Machine2019, 49(4): 352-356. DOI：

摘要

CAP1400设备闸门因结构尺寸较大(插入板外径8.5 m)

焊后热处理(简称PWHT)保温区间较窄(595～620℃)

以及较大的板厚差(封头板厚36 mm

插入板、套筒及法兰板厚130 mm)

其整体PWHT工艺难度较大。通过测定热处理炉温度的均匀性

建立有效加热区域

在该区域内进行封头法兰组件及插入板套筒组件的炉内焊后整体热处理试验

分析试验过程控制方法及热处理曲线

为大型贯穿组件的PWHT提供理论和数据支持。

Abstract

With its large structure size（the outer diameter of inserted plate is 8.5 m）

narrow interval（595～620 ℃） of the post-welding heat treatment（PWHT）

and major difference of plate thickness（the thickness of dome head is 36 mm

the thickness of insert plate

penetration sleeve as well as flange are all 130 mm）

the PWHT process for equipment hatch is a big challenge. In this paper

the temperature uniformity of heat treatment furnace is measured to establish an effective heating area

which guarantees the precision range of heat treatment temperature. In this area

PWHT tests for module of dome head and flange and module of insert plate and penetration sleeves are carried out in furnace. The analysis results of tests procedure and heat treatment curves provide theoretical and data support for CAP1400 large penetration assembly PWHT.