时效处理对6061铝合金MIG焊接头组织和性能的影响

蒋德平; 姚宗湘; 钟席武

焊接工艺 | 浏览量 : 0 下载量: 224 CSCD: 2

导出
分享
收藏
专辑

时效处理对6061铝合金MIG焊接头组织和性能的影响
Effect of aging temperature on microstructure and mechanical properties of MIG weld joint for 6061 aluminum alloy
2018年48卷第2期页码：108-111
纸质出版：2018
DOI：
稿件说明：

移动端阅览

蒋德平, 姚宗湘, 钟席武. 时效处理对6061铝合金MIG焊接头组织和性能的影响[J]. 电焊机, 2018,48(2):108-111. DOI：

JIANG Deping, YAO Zongxiang, ZHONG Xiwu. Effect of aging temperature on microstructure and mechanical properties of MIG weld joint for 6061 aluminum alloy[J]. Eletric Welding Machine2018, 48(2): 108-111. DOI：

摘要

选取固溶温度530℃

保温时间4 h

时效温度分别为140℃、160℃、180℃、200℃

保温时间6 h

对6061铝合金MIG焊接接头进行固溶时效处理。分析时效温度对接头组织、性能和断裂机理的影响。结果表明:焊后固溶时效处理能有效改善接头软化现象

提高力学性能;焊缝的金相组织主要为α（Al）+β（Mg

Si）

且分布较均匀

强化相β（Mg

Si）的分布较为分散

起到了弥散强化作用;时效温度180℃、时间6 h时可获得综合力学性能较好的接头。

Abstract

The solution and aging treatments of MIG weld joint for 6061 aluminum alloy are conducted with the solution temperature of530 ℃ and heat preservation of 4 hours

and aging temperature of 140 ℃

160 ℃

180 ℃ and 200 ℃ respectively and heat preservation of 6 hours. The effect of aging temperature on the microstructure

mechanical properties and fracture mechanism of the welded joint is analyzed. Experimental results show that the postweld solution and aging treatments can effectively improve the softening and mechanical properties of welded joint. The metallographic structure of welds is mainly α（Al）+ β（Mg

Si）

and the distribution is uniform. The distribution of enhance phase β（Mg

Si）is dispersed

which plays a role of dispersion strengthening

and a better comprehensive mechanical property can be obtained when the aging temperature is 180 ℃ with heat preservation of 6 hours.