Study on EBW deep penetration welding for dissimilar metals between austenitic stainless steel and nickel base alloy

LIU Chengdan; SHANG Wei; LUO Xuzhen; WANG Jian; BAI Zhonglian

Views : 0 下载量: 1354 CSCD: 3

PDF
Export
Share
Collection
Album

Study on EBW deep penetration welding for dissimilar metals between austenitic stainless steel and nickel base alloy
Vol. 49, Issue 5, Pages: 13-18(2019)
Published：2019
DOI：
稿件说明：

移动端阅览

DOI：

LIU Chengdan, SHANG Wei, LUO Xuzhen, et al. Study on EBW deep penetration welding for dissimilar metals between austenitic stainless steel and nickel base alloy[J]. Eletric Welding Machine2019, 49(5): 13-18. DOI：

摘要

针对第三代压水堆核电站中密封壳体(奥氏体不锈钢)与贯穿件(Inconel 690镍基合金)的异种金属焊接

采用真空电子束焊开展了焊接工艺研发

通过外观检测、射线检测等确定了焊接工艺。结果表明

在镍基合金和不锈钢电子束深熔焊中

主要缺陷形式为冷隔和钉尖缺陷。焊缝中出现冷隔的主要原因在于厚壁试件焊接时金属蒸汽逸出受阻

在较快的冷却速度下留在焊缝中所致。当工作距离增加时

焊缝熔深减小

金属蒸汽逸出的行程减小

焊缝中出现冷隔缺陷的尺寸和数量也减小

当工作距离与焊接热输入搭配合适时

焊缝中的冷隔缺陷将消失。

Abstract

The dissimilar metal welding of seal（ASS） and penetration assemblies（Inconel 690） has been investigated by vacuum EBW in advanced PWR nuclear power plant. After visual and radiographic inspections

it is found that the main defects of dissimilar metals welding between ASS and Inconel 690 are cold shuts and nail point. Sine the fast cooling rate and samples with thick wall

metal vapor cannot escape from the weld

resulting in cold shuts. As the working distance increases

both the weld penetration and the travel of metal vapor escape reduce

so that the size and number of cold shuts in weld decease. When the working distance matches with the welding heat input appropriately

the cold shut will disappear.